hello everyone ,
i got a new spring for my uta air rifle yesterday for rs 295.. the spring brand name is cheroke .but unluciky there were no gunsmiths on the shop , so i had to call a friend of mine to get it fitted. he did it well .. and i was quite amazed to see the power of my new spring..
it pierced a hard plastic bucket from 50 meters easily
pellet exit path
also brought a packet of mastershot pellets for rs 40 quite good one's
and here's the video
see it to beleive it
thanks
performence after changing the spring videos and pictures
-
- Learning the ropes
- Posts: 40
- Joined: Thu Jul 02, 2009 4:13 pm
- Location: Assam
- tirths
- Shooting true
- Posts: 645
- Joined: Wed Mar 12, 2008 2:43 pm
- Location: Ashok Nahar, Chennai
Re: performence after changing the spring videos and pictures
Are you sure it is 50m? The chappal is there which is 8~10" and I have started calculating and it gives some different figure. I could be wrong! And secondly I see your target is facing towards road and Indian gun behave differently sometime which may make your pellets fly like a dewali rocket. So be careful!
By the way. Congrats for your new spring. I will show you the damages an air pistol can do just by changing to a synthetic SEAL
By the way. Congrats for your new spring. I will show you the damages an air pistol can do just by changing to a synthetic SEAL
-
- Learning the ropes
- Posts: 40
- Joined: Thu Jul 02, 2009 4:13 pm
- Location: Assam
Re: performence after changing the spring videos and pictures
yes tirths u may be right as i have not calculated it.. just a rough guess of mine and yes for sure i will take care of that in future .. will use something behind to block the pellets... and thanks for your kind advise.. and please show me what a synthetic seal can do
-
- On the way to nirvana
- Posts: 84
- Joined: Fri Jan 08, 2010 6:57 pm
- Location: hyderabad
Re: performence after changing the spring videos and pictures
hi dude ,
good work i have seen your pic
and keep every one up dated ....
shell i buy the same air gun u bought .....
amreeth
good work i have seen your pic
and keep every one up dated ....
shell i buy the same air gun u bought .....
amreeth
- ebenezer
- One of Us (Nirvana)
- Posts: 317
- Joined: Wed Jun 14, 2006 1:08 am
- Location: Chennai
Re: performence after changing the spring videos and pictures
Hi airgunsniper,theairgunsniper wrote:yes tirths u may be right as i have not calculated it.. just a rough guess of mine and yes for sure i will take care of that in future .. will use something behind to block the pellets... and thanks for your kind advise.. and please show me what a synthetic seal can do
I'll show you what a synthetic seal can do. See what it has done from a IHP .22 airpistol at 25 feet to a empty deo can:
http://i528.photobucket.com/albums/dd32 ... C00975.jpg
The air pistol is not in its full energy. It's breech seal has to be replaced and it has already done about 500 shots with its original spring. I have never had such a power with its original piston seal. It was just junk.
http://i528.photobucket.com/albums/dd32 ... C00975.jpg
The pellets used were Mastershot (Premier) pointed:
http://i528.photobucket.com/albums/dd32 ... C00980.jpg
And the seal is none other than our Tirtha's synthetic seal
http://i528.photobucket.com/albums/dd32 ... C00983.jpg
It does magic!! And I can vouch for that...
Ebenezer
-
- On the way to nirvana
- Posts: 84
- Joined: Fri Jan 08, 2010 6:57 pm
- Location: hyderabad