performence after changing the spring videos and pictures

All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
Post Reply
theairgunsniper
Learning the ropes
Learning the ropes
Posts: 40
Joined: Thu Jul 02, 2009 4:13 pm
Location: Assam

performence after changing the spring videos and pictures

Post by theairgunsniper » Tue Feb 16, 2010 5:26 pm

hello everyone ,
i got a new spring for my uta air rifle yesterday for rs 295.. the spring brand name is cheroke .but unluciky there were no gunsmiths on the shop , so i had to call a friend of mine to get it fitted. he did it well .. and i was quite amazed to see the power of my new spring..
it pierced a hard plastic bucket from 50 meters easily
Image

pellet exit path
Image
Image

also brought a packet of mastershot pellets for rs 40 quite good one's
Image

and here's the video

see it to beleive it

thanks

For Advertising mail webmaster
User avatar
tirths
Shooting true
Shooting true
Posts: 645
Joined: Wed Mar 12, 2008 2:43 pm
Location: Ashok Nahar, Chennai

Re: performence after changing the spring videos and pictures

Post by tirths » Tue Feb 16, 2010 6:13 pm

Are you sure it is 50m? The chappal is there which is 8~10" and I have started calculating and it gives some different figure. I could be wrong! And secondly I see your target is facing towards road and Indian gun behave differently sometime which may make your pellets fly like a dewali rocket. So be careful!

By the way. Congrats for your new spring. I will show you the damages an air pistol can do just by changing to a synthetic SEAL :)

theairgunsniper
Learning the ropes
Learning the ropes
Posts: 40
Joined: Thu Jul 02, 2009 4:13 pm
Location: Assam

Re: performence after changing the spring videos and pictures

Post by theairgunsniper » Tue Feb 16, 2010 8:06 pm

yes tirths u may be right as i have not calculated it.. just a rough guess of mine :D and yes for sure i will take care of that in future .. will use something behind to block the pellets... and thanks for your kind advise.. and please show me what a synthetic seal can do :D

ven99
On the way to nirvana
On the way to nirvana
Posts: 84
Joined: Fri Jan 08, 2010 6:57 pm
Location: hyderabad

Re: performence after changing the spring videos and pictures

Post by ven99 » Tue Feb 16, 2010 11:19 pm

hi dude ,
good work i have seen your pic
and keep every one up dated ....
shell i buy the same air gun u bought .....
amreeth

User avatar
ebenezer
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 317
Joined: Wed Jun 14, 2006 1:08 am
Location: Chennai

Re: performence after changing the spring videos and pictures

Post by ebenezer » Wed Feb 17, 2010 10:36 pm

theairgunsniper wrote:yes tirths u may be right as i have not calculated it.. just a rough guess of mine :D and yes for sure i will take care of that in future .. will use something behind to block the pellets... and thanks for your kind advise.. and please show me what a synthetic seal can do :D
Hi airgunsniper,

I'll show you what a synthetic seal can do. See what it has done from a IHP .22 airpistol at 25 feet to a empty deo can:

http://i528.photobucket.com/albums/dd32 ... C00975.jpg


The air pistol is not in its full energy. It's breech seal has to be replaced and it has already done about 500 shots with its original spring. I have never had such a power with its original piston seal. It was just junk.

http://i528.photobucket.com/albums/dd32 ... C00975.jpg

The pellets used were Mastershot (Premier) pointed:

http://i528.photobucket.com/albums/dd32 ... C00980.jpg

And the seal is none other than our Tirtha's synthetic seal

http://i528.photobucket.com/albums/dd32 ... C00983.jpg

It does magic!! And I can vouch for that...


Ebenezer

ven99
On the way to nirvana
On the way to nirvana
Posts: 84
Joined: Fri Jan 08, 2010 6:57 pm
Location: hyderabad

Re: performence after changing the spring videos and pictures

Post by ven99 » Thu Dec 16, 2010 5:20 pm

super

Post Reply