Any one need pro -Archery info
-
shootingstars
- Learning the ropes
- Posts: 25
- Joined: Fri Aug 28, 2009 11:21 pm
- Location: Hyderabad
Any one need pro -Archery info
I am a pro archer if any one wants info on Archery pls let me know, I am here to help you guys.
-
Kumar.S.S
- Fresh on the boat
- Posts: 7
- Joined: Fri Aug 21, 2009 8:00 pm
- Location: Coimbatore
Re: Any one need pro -Archery info
Hello Sir,
I am alover of archery and went out of the way to import a PSE laminated recurve about 10 years back. I have been trying to get carbon or fibreglass arrows for the same but except for some aluminum arrows I brought paying heavily, I am disappointed. Can you please guideme where I can get some Carbon arrows
In India/
It would be most pleasant to restart my beloved recreation!
Please help if possible.
Thanks in advance.
Kumar
I am alover of archery and went out of the way to import a PSE laminated recurve about 10 years back. I have been trying to get carbon or fibreglass arrows for the same but except for some aluminum arrows I brought paying heavily, I am disappointed. Can you please guideme where I can get some Carbon arrows
In India/
It would be most pleasant to restart my beloved recreation!
Please help if possible.
Thanks in advance.
Kumar
-
Kumar.S.S
- Fresh on the boat
- Posts: 7
- Joined: Fri Aug 21, 2009 8:00 pm
- Location: Coimbatore
Re: Any one need pro -Archery info
Dear Sir,
Do you have any news for me on the arrows?
Have a nice day.
Kumar
Do you have any news for me on the arrows?
Have a nice day.
Kumar
-
Sakobav
- Old Timer
- Posts: 2973
- Joined: Wed May 31, 2006 7:28 pm
- Location: US
Re: Any one need pro -Archery info
Kumar
Try sending a PM to shootingstar
best
Try sending a PM to shootingstar
best
-
shikari
- Learning the ropes
- Posts: 28
- Joined: Wed Mar 25, 2009 2:49 am
- Location: Ohio,U.S.A
Re: Any one need pro -Archery info
Kumar,Have you thought of making your own?I prefer to make my own,particularly bamboo arrows as I find them more durable than carbon or fibreglass even for field shooting.
If you need any info on making arrows let me know.
Regards
P.J.
If you need any info on making arrows let me know.
Regards
P.J.
-
Kumar.S.S
- Fresh on the boat
- Posts: 7
- Joined: Fri Aug 21, 2009 8:00 pm
- Location: Coimbatore
Re: Any one need pro -Archery info
Hi.P.J.
Thanks for the offer. Please give me any info on making arrows which will be help ful.
As for bamboo, I did use them in the past but when they hit a hard object they splinter. In some cases the arrow almost broke into 3/4 pieces.
I have a couple of carbon arrows, with which I dont face this problem.
I also find the cane( the ones they use for furniture) is better than bamboo.
Regards
Kumar
Thanks for the offer. Please give me any info on making arrows which will be help ful.
As for bamboo, I did use them in the past but when they hit a hard object they splinter. In some cases the arrow almost broke into 3/4 pieces.
I have a couple of carbon arrows, with which I dont face this problem.
I also find the cane( the ones they use for furniture) is better than bamboo.
Regards
Kumar
-
shikari
- Learning the ropes
- Posts: 28
- Joined: Wed Mar 25, 2009 2:49 am
- Location: Ohio,U.S.A
Re: Any one need pro -Archery info
Hello Kumar,
I have had totaly the opposite happen with my arrows,the carbon ones shattered upon impact with the wall behind my target but the bamboo ones actualy bounced back without any apparent damage.What poundage is your bow?
Do you have access to any bamboo groves in your area and can you find a supplier for bamboo that is 3/8 of an inch thick.The way I usually make my bamboo arrows is to select them by width(3/8th of an inch) straighten them over a flame,then weigh the shafts,sand down the nodes,cut in selfnocks in the shaft right above a node.Fletch them,I prefer to use left wing turkey primary feathers,You can use anything,Vulture feathers were traditionaly used in India and Tibet.I then Taper the shafts for points or hunting broadheads.I will take pictures of the process and post them here so you will get a better Idea.
I have had totaly the opposite happen with my arrows,the carbon ones shattered upon impact with the wall behind my target but the bamboo ones actualy bounced back without any apparent damage.What poundage is your bow?
Do you have access to any bamboo groves in your area and can you find a supplier for bamboo that is 3/8 of an inch thick.The way I usually make my bamboo arrows is to select them by width(3/8th of an inch) straighten them over a flame,then weigh the shafts,sand down the nodes,cut in selfnocks in the shaft right above a node.Fletch them,I prefer to use left wing turkey primary feathers,You can use anything,Vulture feathers were traditionaly used in India and Tibet.I then Taper the shafts for points or hunting broadheads.I will take pictures of the process and post them here so you will get a better Idea.
-
shootingstars
- Learning the ropes
- Posts: 25
- Joined: Fri Aug 28, 2009 11:21 pm
- Location: Hyderabad
Re: Any one need pro -Archery info
Hi Kumar...
I have lot of these carbon Graphite and aluminum arrows US made very accurate, can you tell me the poundage ur using. so that i can suggest U the right number.
I have lot of these carbon Graphite and aluminum arrows US made very accurate, can you tell me the poundage ur using. so that i can suggest U the right number.
-
shikari
- Learning the ropes
- Posts: 28
- Joined: Wed Mar 25, 2009 2:49 am
- Location: Ohio,U.S.A
Re: Any one need pro -Archery info
http://paleoplanet69529.yuku.com/topic/20852,
this is a tutorial on building arrows from cane or bamboo.
this is a tutorial on building arrows from cane or bamboo.
-
Kumar.S.S
- Fresh on the boat
- Posts: 7
- Joined: Fri Aug 21, 2009 8:00 pm
- Location: Coimbatore
Re: Any one need pro -Archery info
Hi. Shooting star,
I have a PSE Recurve which is 30 Lbs draw weight.
Do you have any spare Carbon or Fibreglass arrows to suit the bow?
I would pay for it of course.
Please advise.
Thanks and regards
Kumar
I have a PSE Recurve which is 30 Lbs draw weight.
Do you have any spare Carbon or Fibreglass arrows to suit the bow?
I would pay for it of course.
Please advise.
Thanks and regards
Kumar
-
shootingstars
- Learning the ropes
- Posts: 25
- Joined: Fri Aug 28, 2009 11:21 pm
- Location: Hyderabad
Re: Any one need pro -Archery info
Dear Kumar...
Pse is a good bow 30lbs is a good bow to start with can you tell me the height of the bow. I fiber glass arrows are not available in the market but I have carbon and aluminium arrows avlbl with me you can call me on 09885501996 and inform me if ur interested and if would like to come to Hyderabad I can help you better. hope to hear from you soon.
Pse is a good bow 30lbs is a good bow to start with can you tell me the height of the bow. I fiber glass arrows are not available in the market but I have carbon and aluminium arrows avlbl with me you can call me on 09885501996 and inform me if ur interested and if would like to come to Hyderabad I can help you better. hope to hear from you soon.
-
nagarifle
- Old Timer
- Posts: 3404
- Joined: Sat Oct 06, 2007 1:43 pm
- Location: The Land of the Nagas
Re: Any one need pro -Archery info
For arrows info worth checking out http://www.eastonarchery.com/ website as they are one of best makers of arrows and have good info relating to arrows size etc.
Nagarifle
if you say it can not be done, then you are right, for you, it can not be done.
if you say it can not be done, then you are right, for you, it can not be done.
-
Amarbir[Lynx-India]
- Fresh on the boat
- Posts: 11
- Joined: Sat Feb 20, 2010 11:12 pm
- Location: Chandigarh
Re: Any one need pro -Archery info
Hello Kumar ,Kumar.S.S wrote:Hello Sir,
I am alover of archery and went out of the way to import a PSE laminated recurve about 10 years back. I have been trying to get carbon or fibreglass arrows for the same but except for some aluminum arrows I brought paying heavily, I am disappointed. Can you please guideme where I can get some Carbon arrows
In India/
It would be most pleasant to restart my beloved recreation!
Please help if possible.
Thanks in advance.
Kumar
Could You Tell Me What You Are Needing ,I Have started Dealing In Archery Now In chandigarh As a Dealer Might Be i Would Help You .I Am currently Adding Stuff To My Website www.lynx-india.com .The Recurve ,Compound and Crossbows Are Added And i Am Now Adding Accessories Like Arrows Etc .
-
anildev03
- Fresh on the boat
- Posts: 4
- Joined: Wed Oct 27, 2010 6:20 pm
- Location: IN
Re: Any one need pro -Archery info
hi i need the bow string how can i make it at homeshootingstars wrote:I am a pro archer if any one wants info on Archery pls let me know, I am here to help you guys.