IOF .32 revolver
- eljefe
- Old Timer
- Posts: 2874
- Joined: Sun Jun 04, 2006 3:37 am
Re: IOF .32 revolver
What the IOF needs is the equivalent of the MARUTI-to break the stranglehold of the Ambassador and Fiat Padmini
Say, the same design of the 22LR, but in an all steel frame, decent rifling -these guys have a gold mine , but only want to churn out Paan thook
Say, the same design of the 22LR, but in an all steel frame, decent rifling -these guys have a gold mine , but only want to churn out Paan thook
''It dont mean a thing, if it aint got that zing!''
"...Oh but if I went 'round sayin' I was Emperor, just because some moistened bint lobbed a scimitar at me, they'd put me away..."
"...Oh but if I went 'round sayin' I was Emperor, just because some moistened bint lobbed a scimitar at me, they'd put me away..."
-
- Learning the ropes
- Posts: 47
- Joined: Thu Dec 18, 2008 1:04 am
- Location: Chandigarh
Re: IOF .32 revolver
Hi Point Blank,
The Gun can be collectd anytime after 22-09-2009. It is better if you speak to the incharge Mr Gogia. He iis a very helpful guy.
The Gun can be collectd anytime after 22-09-2009. It is better if you speak to the incharge Mr Gogia. He iis a very helpful guy.
-
- Learning the ropes
- Posts: 35
- Joined: Thu Aug 20, 2009 3:43 pm
- Location: udaipur
Re: IOF .32 revolver
Thanks ravineet bhaji ,
I'm RELAXED.
I'm RELAXED.
-
- Almost at nirvana
- Posts: 140
- Joined: Wed Sep 02, 2009 11:46 am
Re: IOF .32 revolver
Hello friends,
I have been following this 'great' forum since long however I have registered today.
I am in the process of getting my licence of .32 revolver and I think if every thing goes well I should have it in hand in another 2 to 3 weeks time. All police work is done but unfortunately, now, my 'all complete tehsil copy of form' has got misplaced / lost by them. I'll have to get the tehsil job done again.
In the form wherein they ask - weapon required - I have mentioned '0.32 Revolver' however someone has suggested that you write 0.32 Revolver / pistol so that the licence is issued with 0.32 revolver / pistol both.
Any inputs from licence holders will be of great benefit.
Best Regards...
I have been following this 'great' forum since long however I have registered today.
I am in the process of getting my licence of .32 revolver and I think if every thing goes well I should have it in hand in another 2 to 3 weeks time. All police work is done but unfortunately, now, my 'all complete tehsil copy of form' has got misplaced / lost by them. I'll have to get the tehsil job done again.
In the form wherein they ask - weapon required - I have mentioned '0.32 Revolver' however someone has suggested that you write 0.32 Revolver / pistol so that the licence is issued with 0.32 revolver / pistol both.
Any inputs from licence holders will be of great benefit.
Best Regards...
When the power of love overcomes the love of power - the world will know peace.
___________________________________________________________________
___________________________________________________________________
-
- Learning the ropes
- Posts: 33
- Joined: Tue Jun 19, 2007 3:43 pm
- Location: Punjab
Re: IOF .32 revolver
Hi ssmickey.32
Welcome to the club, well it might be better if you mention " NPB(non prohibited bore) REVOLVER/PISTOL OR GUN". Good luck.
Welcome to the club, well it might be better if you mention " NPB(non prohibited bore) REVOLVER/PISTOL OR GUN". Good luck.
- brar
- Learning the ropes
- Posts: 33
- Joined: Mon Aug 31, 2009 4:53 pm
- Location: punjab
Re: IOF .32 revolver
hi all
Is any deference between Field gun factory(Kanpur) revolver and Small Arms Factory (Kanpur) revolver?
Brar
Is any deference between Field gun factory(Kanpur) revolver and Small Arms Factory (Kanpur) revolver?
Brar
pahilan kise nu kuj kahi da ni _/\_
je panga pai jave fer piche rahi da ni
je panga pai jave fer piche rahi da ni
-
- Veteran
- Posts: 1427
- Joined: Thu Dec 07, 2006 10:15 am
- Location: Shillong-Dimapur
Re: IOF .32 revolver
brar wrote:hi all
Is any deference between Field gun factory(Kanpur) revolver and Small Arms Factory (Kanpur) revolver?
Brar
Yes... they are available at different places.
He who can not think, is a fool; he who will not, a bigot; he who dare not - a slave!
-
- One of Us (Nirvana)
- Posts: 324
- Joined: Tue Oct 07, 2008 11:18 pm
- Location: bangalore
-
- Fresh on the boat
- Posts: 8
- Joined: Tue Aug 11, 2009 10:40 pm
- Location: india
Re: IOF .32 revolver
What is the difference between the Mark I and the Mark II..........any body have pic of Mark II....if u hav any pic plz post them
-- Thu Sep 03, 2009 3:01 am --
What is the difference between the Mark I and the Mark II..........any body have pic of Mark II....if u hav any pic plz post them
-- Thu Sep 03, 2009 3:01 am --
What is the difference between the Mark I and the Mark II..........any body have pic of Mark II....if u hav any pic plz post them
Last edited by honey_grewal18 on Thu Sep 03, 2009 2:01 am, edited 1 time in total.
-
- One of Us (Nirvana)
- Posts: 401
- Joined: Sat Jan 05, 2008 6:00 pm
- Location: Punjab.
Re: IOF .32 revolver
The biggest difference between m1 and m2 is that m1 has a fixed striking hammer which tends to break sometimes where as m2 has an enclosed independent striking pin which can never break. But there is hardly any difference in m2 and m3
Prabhdeep Singh Grewal
Prabhdeep Singh Grewal
- brar
- Learning the ropes
- Posts: 33
- Joined: Mon Aug 31, 2009 4:53 pm
- Location: punjab
Re: IOF .32 revolver
Still I am confusedcottage cheese wrote:brar wrote:hi all
Is any deference between Field gun factory(Kanpur) revolver and Small Arms Factory (Kanpur) revolver?
Brar
Yes... they are available at different places.
Answer please or send the link
Thanx and best regards
Brar
-- Thu Sep 03, 2009 5:09 pm --
grewal wrote:The biggest difference between m1 and m2 is that m1 has a fixed striking hammer which tends to break sometimes where as m2 has an enclosed independent striking pin which can never break. But there is hardly any difference in m2 and m3
Prabhdeep Singh Grewal
Dear gunners
As I came to know that IOF Kanpur is going to enhance length of barrel (2”) total length of barrel would be 5” and introducing in side electroplated barrels to prevent rusting
I think now it is implemented
regards
Brar
pahilan kise nu kuj kahi da ni _/\_
je panga pai jave fer piche rahi da ni
je panga pai jave fer piche rahi da ni
-
- Almost at nirvana
- Posts: 140
- Joined: Wed Sep 02, 2009 11:46 am
Re: IOF .32 revolver
Thanks for your reply mannvikram... the information is of great help...
yes Brar, it's Mark IV also named as 'Anmol' but please wait for the same for another 1 year or so...
Best regards...
yes Brar, it's Mark IV also named as 'Anmol' but please wait for the same for another 1 year or so...
Best regards...
When the power of love overcomes the love of power - the world will know peace.
___________________________________________________________________
___________________________________________________________________
- The Doc
- Veteran
- Posts: 1253
- Joined: Tue Feb 13, 2007 9:25 am
- Location: India.
Re: IOF .32 revolver
A revolver named Anmol ??ssmickey.32 wrote:it's Mark IV also named as 'Anmol'
Where do these guys get these names from?
I can imagine people saying ..............Have you fired your "Anmol" lately ?
..............Watch out, he has a "Anmol" in his pocket !!
.............His " Anmol's " barrel is getting rusted !!
and so on .
best,
Rp.
It's always better to have a gun and not need it than need a gun and not have it !
-
- Veteran
- Posts: 1427
- Joined: Thu Dec 07, 2006 10:15 am
- Location: Shillong-Dimapur
Re: IOF .32 revolver
what was that???.... animal...um er.... amul...er...The Doc wrote:A revolver named Anmol ??ssmickey.32 wrote:it's Mark IV also named as 'Anmol'
Where do these guys get these names from?
I can imagine people saying ..............Have you fired your "Anmol" lately ?
..............Watch out, he has a "Anmol" in his pocket !!
.............His " Anmol's " barrel is getting rusted !!
and so on .
best,
Rp.
He who can not think, is a fool; he who will not, a bigot; he who dare not - a slave!
- The Doc
- Veteran
- Posts: 1253
- Joined: Tue Feb 13, 2007 9:25 am
- Location: India.
Re: IOF .32 revolver
Anmol = Pricelesscottage cheese wrote:what was that???.... animal...um er.... amul...er...
It's always better to have a gun and not need it than need a gun and not have it !