Using 20 guage and .22 rounds in a 12 bore shotgun
- snIPer
- Veteran
- Posts: 1664
- Joined: Wed May 23, 2007 12:06 pm
Using 20 guage and .22 rounds in a 12 bore shotgun
Ive read around that the 12 guage can accommodate "inserts / Adapters" to fire .22 or 20 guage rounds.
Are these available in India and is it legal to use it.
Has anyone here used it?
Any input will be appreciated.
Thank you.
/S/
Are these available in India and is it legal to use it.
Has anyone here used it?
Any input will be appreciated.
Thank you.
/S/
On my Epitaph - Off to Happy Hunting Grounds.
- nagarifle
- Old Timer
- Posts: 3404
- Joined: Sat Oct 06, 2007 1:43 pm
- Location: The Land of the Nagas
hi sniper
we do get barrel conversion kit ie say u have 5.56 rifle and u can get a kit which contains barrel insert and block etc its 2 min job to change the cal. via this method.
not sure about the shotguns but i do not see much difficulty in these. sorry i can not answer the legal question on this.
we do get barrel conversion kit ie say u have 5.56 rifle and u can get a kit which contains barrel insert and block etc its 2 min job to change the cal. via this method.
not sure about the shotguns but i do not see much difficulty in these. sorry i can not answer the legal question on this.
Nagarifle
if you say it can not be done, then you are right, for you, it can not be done.
if you say it can not be done, then you are right, for you, it can not be done.
- Vikram
- We post a lot
- Posts: 5108
- Joined: Fri Jun 02, 2006 6:14 am
- Location: Tbilisi,Georgia
Re: Using 20 guage and .22 rounds in a 12 bore shotgun
Sniper, There in deed are sub-gauge tubes that can be inserted into a 12 bore gun.You can shoot 20,28,.410.
Check these links.
http://www.briley.com/index.asp?PageAct ... tom&ID=102
http://www.briley.com/ProductImages/tub ... 6,1,Briley
The same with rifles.
Re legal aspect, Monsieur SSS can enlighten us.
Best-
Vikram
Check these links.
http://www.briley.com/index.asp?PageAct ... tom&ID=102
http://www.briley.com/ProductImages/tub ... 6,1,Briley
The same with rifles.
Re legal aspect, Monsieur SSS can enlighten us.
Best-
Vikram
It ain’t over ’til it’s over! "Rocky,Rocky,Rocky....."
- Vikram
- We post a lot
- Posts: 5108
- Joined: Fri Jun 02, 2006 6:14 am
- Location: Tbilisi,Georgia
Re: Using 20 guage and .22 rounds in a 12 bore shotgun
Some detailed info
http://findarticles.com/p/articles/mi_m ... i_n8709806
Naga, no idea.
Best-
Vikram
http://findarticles.com/p/articles/mi_m ... i_n8709806
Naga, no idea.
Best-
Vikram
It ain’t over ’til it’s over! "Rocky,Rocky,Rocky....."
-
- Veteran
- Posts: 1427
- Joined: Thu Dec 07, 2006 10:15 am
- Location: Shillong-Dimapur
Re: Using 20 guage and .22 rounds in a 12 bore shotgun
Strictly speaking an sub-caliber adapter will be regarded as a separate firearm...after all you'll need a .22 license to purchase .22 shots legally
It would be an interesting mental exercise trying to explain how you have .22 shots in absence of a license... in a country where mere possession of a single unlicensed firearm bullet can get you into a lot of trouble.
Yes .410 is PB- at least the Arms Act is clear on this...
It would be an interesting mental exercise trying to explain how you have .22 shots in absence of a license... in a country where mere possession of a single unlicensed firearm bullet can get you into a lot of trouble.
Yes .410 is PB- at least the Arms Act is clear on this...
He who can not think, is a fool; he who will not, a bigot; he who dare not - a slave!
-
- Veteran
- Posts: 1427
- Joined: Thu Dec 07, 2006 10:15 am
- Location: Shillong-Dimapur
Well snIPer...I probably missed a notification or two... I was just quoting the Arms Act...snIPer";p="44236 wrote:If im not mistaken a .410 shotgun is very much allowed.
Here it is word for word:
Section 1(c)
"Bolt action or semi-automatic rifles of .303" or 7.62mm bore or any other bore which can chamber and fire service ammunition of .303" or 7.62mm, calibre; muskets, of .410 bore or any other bore which can fire .410"musket ammunition; pistols, revolvers or cartridges of any bore which can fire .380" or .455" rimmed cartridges or service 9mm, or .45" rimless cartridges"
Note that the use of the word musket does not necessarily apply to muzzle loaders- They have those old 303's re-barreled and and converted to single shot in the hands of the police. They still make their grand appearance every once in a while. Ammunition stocks are still plentiful but old.
regards,
cc
He who can not think, is a fool; he who will not, a bigot; he who dare not - a slave!
- eljefe
- Old Timer
- Posts: 2876
- Joined: Sun Jun 04, 2006 3:37 am
Grey area i think, the 410.
Govt/police 410 'musket' is a single lead ball loaded on a ? 303 'blown up' brass
410 for the rest of the world. is a SHOTGUN cartridge. So how come 410 as per govt de.scription embraces anything in 410? Both -the Govt 410 musket ammo and civvy 410 are not interchangeable -To the best of my memory...
go figure!!
Govt/police 410 'musket' is a single lead ball loaded on a ? 303 'blown up' brass
410 for the rest of the world. is a SHOTGUN cartridge. So how come 410 as per govt de.scription embraces anything in 410? Both -the Govt 410 musket ammo and civvy 410 are not interchangeable -To the best of my memory...
go figure!!
''It dont mean a thing, if it aint got that zing!''
"...Oh but if I went 'round sayin' I was Emperor, just because some moistened bint lobbed a scimitar at me, they'd put me away..."
"...Oh but if I went 'round sayin' I was Emperor, just because some moistened bint lobbed a scimitar at me, they'd put me away..."
-
- Veteran
- Posts: 1427
- Joined: Thu Dec 07, 2006 10:15 am
- Location: Shillong-Dimapur
Ah! 'jefe sahib! thanks for the info... looks like another babu-rich territory...eljefe";p="44238 wrote:Grey area i think, the 410.
Govt/police 410 'musket' is a single lead ball loaded on a ? 303 'blown up' brass
410 for the rest of the world. is a SHOTGUN cartridge. So how come 410 as per govt de.scription embraces anything in 410? Both -the Govt 410 musket ammo and civvy 410 are not interchangeable -To the best of my memory...
go figure!!
He who can not think, is a fool; he who will not, a bigot; he who dare not - a slave!
-
- Almost at nirvana
- Posts: 219
- Joined: Sun Dec 31, 2006 1:25 pm
- Location: Patiala (Punjab)
- nagarifle
- Old Timer
- Posts: 3404
- Joined: Sat Oct 06, 2007 1:43 pm
- Location: The Land of the Nagas