Introduction
-
- Learning the ropes
- Posts: 20
- Joined: Mon May 19, 2008 3:30 pm
- Location: Mysore
Introduction
Hello all
I am an ex-Air force navigator.I've been interested in guns since I was 9 or 10 years old.After my retirement I collected a few guns and modified some of them to look like Army weapons(7.62 rifle,Sten machine carbine etc). Others were modified for target shooting.These are quite accurate and can consistently hit a .22 pellet at 15 ft.One air rifle has a home-made laser sight which is very effective on rats and bandicoots in almost complete darkness.Incidentally this sight is very simple to make and costs only Rs.35 or so.I've also made some crossbows;one using a car leaf spring(which turned out to be too powerful for comfort) and two others with 3/4 inch spring steel bows. Among the other items I have made are:- swords,battle-axes,spears,maces,knives,a khukri,knuckle dusters,push daggers,side handle batons,steel framed catapults and a cannon for firing Diwali crackers.(This last is used only at Diwali time because of the very loud roar it produces.I've also made fake "elephant tusks"from cow horns painted off-white and mounted appropriately on a backing board.
I'm interested in fishing and have a number of graphite rods(which I bought not made).However I found them a little light for big river ( Coorg)
fishing so made some heavier ones from bamboo.I make my own lures and flies for which I made a fly-tying vice from wood and a hobby knife handle.
For those of you who are wondering I have 14 air rifles.4 air pistols 1 bolt action 12 bore shotgun (about 80 years old) 11 graphite fishing rods and about 25 bamboo rods.
All this keeps me busy and out of any mischief.
Cheers
gun nut
I am an ex-Air force navigator.I've been interested in guns since I was 9 or 10 years old.After my retirement I collected a few guns and modified some of them to look like Army weapons(7.62 rifle,Sten machine carbine etc). Others were modified for target shooting.These are quite accurate and can consistently hit a .22 pellet at 15 ft.One air rifle has a home-made laser sight which is very effective on rats and bandicoots in almost complete darkness.Incidentally this sight is very simple to make and costs only Rs.35 or so.I've also made some crossbows;one using a car leaf spring(which turned out to be too powerful for comfort) and two others with 3/4 inch spring steel bows. Among the other items I have made are:- swords,battle-axes,spears,maces,knives,a khukri,knuckle dusters,push daggers,side handle batons,steel framed catapults and a cannon for firing Diwali crackers.(This last is used only at Diwali time because of the very loud roar it produces.I've also made fake "elephant tusks"from cow horns painted off-white and mounted appropriately on a backing board.
I'm interested in fishing and have a number of graphite rods(which I bought not made).However I found them a little light for big river ( Coorg)
fishing so made some heavier ones from bamboo.I make my own lures and flies for which I made a fly-tying vice from wood and a hobby knife handle.
For those of you who are wondering I have 14 air rifles.4 air pistols 1 bolt action 12 bore shotgun (about 80 years old) 11 graphite fishing rods and about 25 bamboo rods.
All this keeps me busy and out of any mischief.
Cheers
gun nut
-
- One of Us (Nirvana)
- Posts: 376
- Joined: Wed May 02, 2007 11:32 pm
- Location: Delhi
- b.baracho
- Almost at nirvana
- Posts: 215
- Joined: Sun May 04, 2008 7:54 pm
- Location: goa
Re: Introduction
hi gun nut,
welcome to the sight
welcome to the sight
-
- Veteran
- Posts: 1902
- Joined: Sun Sep 30, 2007 3:19 pm
- Location: Bangalore, INDIA
- Contact:
Ah. A wonderful introduction
... and am amazing collection indeed. Probably one of the best that I have heard. More importantly, I truly appreciate your efforts in all that you are doing - making and bettering shooting and fishing stuff. <CLAP><CLAP>
Do share some of your work as good guidance to those who appreciate it
... and am amazing collection indeed. Probably one of the best that I have heard. More importantly, I truly appreciate your efforts in all that you are doing - making and bettering shooting and fishing stuff. <CLAP><CLAP>
Do share some of your work as good guidance to those who appreciate it
Never Shave without a Blade
.......^___________________^
....../ '---_________________ ]
...../_==O;;;;;;;;_______.:/
.....),---.(_(____)/.....
....// (..) ),----/....
...//____//......
..//____//......
.//____//......
..-------
.......^___________________^
....../ '---_________________ ]
...../_==O;;;;;;;;_______.:/
.....),---.(_(____)/.....
....// (..) ),----/....
...//____//......
..//____//......
.//____//......
..-------
-
- Veteran
- Posts: 1427
- Joined: Thu Dec 07, 2006 10:15 am
- Location: Shillong-Dimapur
Re: Introduction
Hi Gun-Nut,
Meet another gun-nut... I think we'll have many a chatty afternoon.
We have some dedicated fish killers here as well
Welcome to IFG... I think you'll get along pretty good with most folks here on both fronts.
lets see some pics of your mods.
regards,
cc
Meet another gun-nut... I think we'll have many a chatty afternoon.
We have some dedicated fish killers here as well
Welcome to IFG... I think you'll get along pretty good with most folks here on both fronts.
lets see some pics of your mods.
regards,
cc
Last edited by cottage cheese on Wed May 21, 2008 8:00 pm, edited 1 time in total.
He who can not think, is a fool; he who will not, a bigot; he who dare not - a slave!
- mundaire
- We post a lot
- Posts: 5410
- Joined: Mon May 22, 2006 5:53 pm
- Location: New Delhi, India
- Contact:
Welcome aboard gun nut, sounds like you've been having yourself some fun!
Look forward to seeing you post here more often.
Cheers!
Abhijeet
Look forward to seeing you post here more often.
Cheers!
Abhijeet
Like & share IndiansForGuns Facebook Page
Follow IndiansForGuns on Twitter
FIGHT FOR YOUR RIGHTS - JOIN NAGRI NOW!
www.gunowners.in
"Political tags - such as royalist, communist, democrat, populist, fascist, liberal, conservative, and so forth - are never basic criteria. The human race divides politically into those who want people to be controlled and those who have no such desire." -- Robert Heinlein
Follow IndiansForGuns on Twitter
FIGHT FOR YOUR RIGHTS - JOIN NAGRI NOW!
www.gunowners.in
"Political tags - such as royalist, communist, democrat, populist, fascist, liberal, conservative, and so forth - are never basic criteria. The human race divides politically into those who want people to be controlled and those who have no such desire." -- Robert Heinlein
- Pran
- Eminent IFG'an
- Posts: 994
- Joined: Sat Nov 25, 2006 2:06 pm
- Location: Bengaluru, Karnataka
Re: Introduction
Welcome aboard, Gun nut! Would love to see pictures of your toys.
Pran
Pran
"A gun is a tool, Marian. No better, no worse than any other tool. An axe, a shovel, or anything. A gun is as good or as bad as the man using it."
-
- Learning the ropes
- Posts: 20
- Joined: Mon May 19, 2008 3:30 pm
- Location: Mysore
Re: Introduction
Thanks all for your responses to my intro.I'll try to post some pics of my den in which many of the things I have made/modified can be seen.The only problem is that all the pics are photo prints taken with an old fashioned film camera and I'm not at all sure how to post them.
- eljefe
- Old Timer
- Posts: 2876
- Joined: Sun Jun 04, 2006 3:37 am
welcome to the madness-no loran or offsets here-great to hear of your modifications/ rods etc. do scan the pics and post
best
Axx
best
Axx
''It dont mean a thing, if it aint got that zing!''
"...Oh but if I went 'round sayin' I was Emperor, just because some moistened bint lobbed a scimitar at me, they'd put me away..."
"...Oh but if I went 'round sayin' I was Emperor, just because some moistened bint lobbed a scimitar at me, they'd put me away..."
-
- Almost at nirvana
- Posts: 219
- Joined: Sun Dec 31, 2006 1:25 pm
- Location: Patiala (Punjab)
-
- Veteran
- Posts: 1101
- Joined: Mon Mar 05, 2007 3:18 pm
- Location: Bangalore
- Contact:
Re: Introduction
Welcome aboard. Hope to see some pics of your ars soon.
-
- We post a lot
- Posts: 5775
- Joined: Mon May 22, 2006 6:23 pm
Re: Introduction
Hope to see some pics of your ars soon.
- Vikram
- We post a lot
- Posts: 5108
- Joined: Fri Jun 02, 2006 6:14 am
- Location: Tbilisi,Georgia
Re: Introduction
Mack The Knife Bana";p="44299 wrote:Hope to see some pics of your ars soon.
It ain’t over ’til it’s over! "Rocky,Rocky,Rocky....."