Newlite airguns - Jodhpur
- snIPer
- Veteran
- Posts: 1664
- Joined: Wed May 23, 2007 12:06 pm
Newlite airguns - Jodhpur
Does anyone have any idea of a underlever NEW LITE airguns performance?
On my Epitaph - Off to Happy Hunting Grounds.
- Risala
- Shooting true
- Posts: 916
- Joined: Fri Mar 02, 2007 12:24 am
- Location: Khurpatal
Re: NEWLITE airguns
Where is this one from,there is a Co by that name out of Jodhpur that makes shotty's,pretty popular up North.
Sanjay
Sanjay
- eljefe
- Old Timer
- Posts: 2875
- Joined: Sun Jun 04, 2006 3:37 am
New Art Lite works? used to have a single 12 by that name a long time ago, kind of 3-4k piece , those days.Vicious kick though!
''It dont mean a thing, if it aint got that zing!''
"...Oh but if I went 'round sayin' I was Emperor, just because some moistened bint lobbed a scimitar at me, they'd put me away..."
"...Oh but if I went 'round sayin' I was Emperor, just because some moistened bint lobbed a scimitar at me, they'd put me away..."
-
- Almost at nirvana
- Posts: 210
- Joined: Sun Jun 24, 2007 5:03 pm
- Location: Indore (MP)
Re: NEWLITE airguns
I am a arms dealer in Indore and had enquired a couple of months back in factory.
They do not any more make this air rifles.
Cheers
They do not any more make this air rifles.
Cheers
- Shamsher
- One of Us (Nirvana)
- Posts: 270
- Joined: Tue May 08, 2007 2:48 pm
- Location: Agra
Re: NEWLITE airguns
The jodhpur made new-lite Air Rifle is avaliable with India arms, Gurretti xing, Moradabad for 2800.00 in .22, the grooves are supposed to be very decently done.
It is more powerful than the IHP-35 anyday. & pretty accurate too compared to indian standards
it is a underleaver with a very stiff spring & a pretty good kick too.
Can tire u if on a field job, there is a constant complaint about air leak from the joints, where the solder gets blown away due to careless use.
one must remember to close the pellet loading lever before firing, else the air pressure can even burst the chamber.
Shamsher
It is more powerful than the IHP-35 anyday. & pretty accurate too compared to indian standards
it is a underleaver with a very stiff spring & a pretty good kick too.
Can tire u if on a field job, there is a constant complaint about air leak from the joints, where the solder gets blown away due to careless use.
one must remember to close the pellet loading lever before firing, else the air pressure can even burst the chamber.
Shamsher
- snIPer
- Veteran
- Posts: 1664
- Joined: Wed May 23, 2007 12:06 pm
Re: NEWLITE airguns
Hmm - havent heard of that before.Shamsher";p="23076 wrote: else the air pressure can even burst the chamber.
Shamsher
On my Epitaph - Off to Happy Hunting Grounds.
- dev
- Old Timer
- Posts: 2614
- Joined: Wed Jun 14, 2006 5:16 pm
- Location: New Delhi
I disagree about it being superior to the IHP. I had one for eleven years and it shot smoothly all the while. It could break beer bottles with mastershot pellets at about 20 feet, I didn't have more space on the roof.
This was enough power, delivered shot after shot without making me hate it. Trigger was hard but I smoothened it out till it became decent.
I had a jodhpur arms under lever which was a pita in comparison. powerful due to excessive dieseling which all ended when the oil dried up. Then the pellet would start to nose dive after 15 feet. After you have pulled the shot off target due to the hard trigger.
Regards,
Dev
This was enough power, delivered shot after shot without making me hate it. Trigger was hard but I smoothened it out till it became decent.
I had a jodhpur arms under lever which was a pita in comparison. powerful due to excessive dieseling which all ended when the oil dried up. Then the pellet would start to nose dive after 15 feet. After you have pulled the shot off target due to the hard trigger.
Regards,
Dev
To ride, to speak up, to shoot straight.
-
- One of Us (Nirvana)
- Posts: 376
- Joined: Wed May 02, 2007 11:32 pm
- Location: Delhi
Re: NEWLITE airguns
its a springer or wht
considering 2800 i suppose it is
could any one throw some more light on this post plzzz
ill try and search more on this rifle thanks
considering 2800 i suppose it is
could any one throw some more light on this post plzzz
ill try and search more on this rifle thanks
- snIPer
- Veteran
- Posts: 1664
- Joined: Wed May 23, 2007 12:06 pm
NEWLITE airguns - Pictures posted
Posting pictures of NEW Lite Airgun - Underlever.
Sorry about the resolution - was taken with a mobile phone.
Mods please let me know if the size is too much and i will alter and repost.
Sorry about the resolution - was taken with a mobile phone.
Mods please let me know if the size is too much and i will alter and repost.
On my Epitaph - Off to Happy Hunting Grounds.
-
- We post a lot
- Posts: 5775
- Joined: Mon May 22, 2006 6:23 pm
- kanwar76
- Eminent IFG'an
- Posts: 1861
- Joined: Tue Jun 06, 2006 7:00 pm
- Location: Bang-a-lure
- Contact:
Re: NEWLITE airguns
I have something like this too and thats also made in Jodhpur, but its made by some Bhattis.. its in my hometown.. Will try to get some pics of it but its a smoothbore...
-Inder
-Inder
I am the Saint the Soldier that walks in Peace. I am the Humble dust of your feet, But dont think my Spirituality makes me weak. The Heavens will roar if my Kirpan were to speak...
- snIPer
- Veteran
- Posts: 1664
- Joined: Wed May 23, 2007 12:06 pm
Re: NEWLITE airguns
This is rifled- Pretty heavy but very consistent. Fires well with round heads.
Missed one pic - adding that too.
/S/
Missed one pic - adding that too.
/S/
On my Epitaph - Off to Happy Hunting Grounds.
-
- Learning the ropes
- Posts: 28
- Joined: Sat Jan 12, 2008 1:10 am
Jodhpur Made Air Gun 0.22
Hiii Frends,
I am not able to track down the intro place to formally Introduce me....However let me ask on my doubt first with the plethora of knowledge you guys have on this subject....I have a one Indian made under lever air gun 0.22 ( as it is fixed barrel I am not sure if the barrel is rifeled or not) but it is one made by new light at works co. from Jodhpur. I recently replaced its mainspring and put cherokee spring in there with a leather washer..still I think the performance of the gun is not up to the mark. Please giv me your suggestions on how I can make it a power house, I like its hold and design a lot and thats the reason I dont wana go for any other Indian break barrel... Please giv me suggestions on what you guys think I should DO.....Thnx so much frends.
I am not able to track down the intro place to formally Introduce me....However let me ask on my doubt first with the plethora of knowledge you guys have on this subject....I have a one Indian made under lever air gun 0.22 ( as it is fixed barrel I am not sure if the barrel is rifeled or not) but it is one made by new light at works co. from Jodhpur. I recently replaced its mainspring and put cherokee spring in there with a leather washer..still I think the performance of the gun is not up to the mark. Please giv me your suggestions on how I can make it a power house, I like its hold and design a lot and thats the reason I dont wana go for any other Indian break barrel... Please giv me suggestions on what you guys think I should DO.....Thnx so much frends.