Remington Arms:One at a Time!
- Vikram
- We post a lot
- Posts: 5107
- Joined: Fri Jun 02, 2006 6:14 am
- Location: Tbilisi,Georgia
Remington Arms:One at a Time!
It will be highly worth your time to watch it.I promise you.
[youtube][/youtube]
Best-
Vikram
[youtube][/youtube]
Best-
Vikram
It ain’t over ’til it’s over! "Rocky,Rocky,Rocky....."
-
- One of Us (Nirvana)
- Posts: 306
- Joined: Sun Sep 16, 2007 11:39 pm
- Location: New Delhi
Re: Remington Arms:One at a Time!
awesome....
I was under the impression that autos and pump actions were less accurate as compared to bolt actions....
NM
I was under the impression that autos and pump actions were less accurate as compared to bolt actions....
NM
-
- Shooting true
- Posts: 704
- Joined: Sun Dec 17, 2006 3:16 pm
- Location: Chennai
Re: Remington Arms:One at a Time!
nice video vikram , thanks for sharing!
- lakecity_shooter
- Almost at nirvana
- Posts: 170
- Joined: Thu Sep 01, 2011 1:39 pm
- Location: udaipur
- Contact:
Re: Remington Arms:One at a Time!
great video.......thanks for sharing !!!!!!!!
"Defeat is a choice so as victory,You are never beaten till u decide"
- xl_target
- Old Timer
- Posts: 3488
- Joined: Wed Jul 29, 2009 7:47 am
- Location: USA
Re: Remington Arms:One at a Time!
Great Find Vikram! Enjoyed it tremendously.
I hope all of you realize that this video is (from the late 1960's to the early 1970's). Techniques today are far advanced and you wont see as much handwork in manufacture today. The tape fed CNC machines are dinosaurs, the prehistoric ancestors of today's machines.
To expand on Vikram's post, here is a history of Remington's guns.
[youtube][/youtube]
I hope all of you realize that this video is (from the late 1960's to the early 1970's). Techniques today are far advanced and you wont see as much handwork in manufacture today. The tape fed CNC machines are dinosaurs, the prehistoric ancestors of today's machines.
To expand on Vikram's post, here is a history of Remington's guns.
[youtube][/youtube]
“Never give in, never give in, never; never; never; never – in nothing, great or small, large or petty – never give in except to convictions of honor and good sense” — Winston Churchill, Oct 29, 1941
-
- Veteran
- Posts: 1906
- Joined: Tue Apr 06, 2010 9:55 am
- Location: tamilnadu,india
Re: Remington Arms:One at a Time!
i was wondering about iof,must be sooooooooooo sophisticated.
regards
dr.jk
regards
dr.jk
- brihacharan
- Old Timer
- Posts: 3112
- Joined: Fri Jan 22, 2010 3:33 pm
- Location: mumbai
Re: Remington Arms:One at a Time!
> Tks Vikram - What a treat to watch 'Precision' at work
Briha
Briha
- AgentDoubleS
- Poster of the month - Apr 2015
- Posts: 630
- Joined: Sun Sep 17, 2006 9:12 pm
- Location: Here and there..
Re: Remington Arms:One at a Time!
I guess I just discovered time travel- at least for the Americans. Ask them to come and see what we 'commoners' here shoot with. It'll be time travel back to at least a 150 years?!
Nice post Vikram.
Nice post Vikram.
- Baljit
- Shooting true
- Posts: 882
- Joined: Tue Jun 23, 2009 8:27 am
- Location: Kelowna , BC . Canada
Remington Arms - "One At A Time" (1969)
Hello guy's today i am doing some research on the youtube and i came across a very intersting video about Remington Arms.In this video you guy's can see how they are making a gun's back in 60s.I realy enjoyed this video and like to share this with all of you guy's.
Here is a link for the video.Enjoy
Here is my Remington 700 SPS Vermint in .223
Enjoy.
Baljit
Here is a link for the video.Enjoy
Here is my Remington 700 SPS Vermint in .223
Enjoy.
Baljit
- Hammerhead
- Shooting true
- Posts: 607
- Joined: Thu Aug 04, 2011 6:52 am
- Location: Toronto
Re: Remington Arms - "One At A Time" (1969)
OK, that's an excuse to tease the guys back home. And you are going to cost some guys here another grand to buy more. Looking one to build for target practice in summer, already have a scope and spotting scope lined up - Haji
Edit:Looking for heavy barrel then will have it cut to size, gunsmith @ Precision Arms and Gunsmithing is my long time buddy.
Edit:Looking for heavy barrel then will have it cut to size, gunsmith @ Precision Arms and Gunsmithing is my long time buddy.
Last edited by Hammerhead on Mon Dec 03, 2012 7:17 am, edited 1 time in total.
The only thing necessary for the triumph of evil is for good men to do nothing. - Edmund Burke
- Baljit
- Shooting true
- Posts: 882
- Joined: Tue Jun 23, 2009 8:27 am
- Location: Kelowna , BC . Canada
Re: Remington Arms - "One At A Time" (1969)
Hammerhead wrote:OK, that's an excuse to tease the guys back home. And you are going to cost some guys here another grand to buy more. Looking one to build for target practice in summer, already have a scope and spotting scope lined up - Haji
hahaha..... that's the point and good luck for your new toy.
Baljit
- xl_target
- Old Timer
- Posts: 3488
- Joined: Wed Jul 29, 2009 7:47 am
- Location: USA
Re: Remington Arms - "One At A Time" (1969)
Baljit,
Good video.
Did you just get this? What scope do you have on this?
How about a range report.
Good video.
Did you just get this? What scope do you have on this?
How about a range report.
“Never give in, never give in, never; never; never; never – in nothing, great or small, large or petty – never give in except to convictions of honor and good sense” — Winston Churchill, Oct 29, 1941
- Baljit
- Shooting true
- Posts: 882
- Joined: Tue Jun 23, 2009 8:27 am
- Location: Kelowna , BC . Canada
Re: Remington Arms - "One At A Time" (1969)
Thank's XL.
No i did not get this now , i have this from last couples of years , i hope you rembers when CK come to me last year and he shoot this toy as well.
Here is link.....http://indiansforguns.com/viewtopic.php ... 5&start=15
About scope its Millett 4X16X50mm and here is a link....http://www.millettsights.com/scopes/trs/
Here is a pictuers for the grouping i have at 100 yards with my own ammo.
Well if you still like to see other range report then let me know .
Baljit
No i did not get this now , i have this from last couples of years , i hope you rembers when CK come to me last year and he shoot this toy as well.
Here is link.....http://indiansforguns.com/viewtopic.php ... 5&start=15
About scope its Millett 4X16X50mm and here is a link....http://www.millettsights.com/scopes/trs/
Here is a pictuers for the grouping i have at 100 yards with my own ammo.
Well if you still like to see other range report then let me know .
Baljit
- Vikram
- We post a lot
- Posts: 5107
- Joined: Fri Jun 02, 2006 6:14 am
- Location: Tbilisi,Georgia
Re: Remington Arms:One at a Time!
Nice rifle and tight groups there,Baljit.Thanks for sharing.
It ain’t over ’til it’s over! "Rocky,Rocky,Rocky....."
- xl_target
- Old Timer
- Posts: 3488
- Joined: Wed Jul 29, 2009 7:47 am
- Location: USA
Re: Remington Arms:One at a Time!
That's pretty good for a factory rifle.
Of course, the shooter the man behind the gun is what really makes it happen.
Excellent shooting, as usual, Baljit.
Of course, the shooter the man behind the gun is what really makes it happen.
Excellent shooting, as usual, Baljit.
“Never give in, never give in, never; never; never; never – in nothing, great or small, large or petty – never give in except to convictions of honor and good sense” — Winston Churchill, Oct 29, 1941