IOF 30-06 Rifle

perfectionist1 · Post by **perfectionist1** » Tue Feb 14, 2012 12:05 am

Gentlemen,

Really sorry to hear about Katana's 30 '06. Let us know the outcome from IOF

I was planning to buy the rifle.

Well, as mentioned in the initial posts, is it necessary to have a special license for 30 '06 rifle or NBP Rifle license on which you can buy .315 will be ok to buy 30 '06 on it.

Cheers....

goodboy_mentor · Post by **goodboy_mentor** » Tue Feb 14, 2012 12:16 am

You do not need any different license. A license that says NBP rifle will do since 30-06 is NPB.

veeveeaar · Post by **veeveeaar** » Tue Feb 14, 2012 8:10 am

Guys this is a good opportunity to take on IOF for their "" price for quality"". so please do post your experiences and we can do an RTI petition for spares, repairs and aftersales service....

winnie_the_pooh · Post by **winnie_the_pooh** » Tue Feb 14, 2012 8:39 am

I will say this again,the IOF 30-06 is more accurate than most of the imported rifles available in the country that cost 3 to10 times as much.

Katana · Post by **Katana** » Wed Feb 15, 2012 10:20 am

Absolutely agree with you, winnie. Moreover, I'm treating my problem as an opportunity to learn the dynamics of the gun and also to improve it further.

Although I have notified IOF about this I somehow do not expect any assistance. What is heartening to me is that quite a few members here have offered me their advise.

carbine · Post by **carbine** » Tue Mar 13, 2012 5:47 pm

what is difference between 30-06 rifle manufactured by rifle factory of tiruchirapalli and rifle factory of ISHAPORE ,which make better rifle

winnie_the_pooh · Post by **winnie_the_pooh** » Tue Mar 13, 2012 8:29 pm

carbine wrote:what is difference between 30-06 rifle manufactured by rifle factory of tiruchirapalli and rifle factory of ISHAPORE ,which make better rifle

30-06 rifles are made in Isahpore.Trichurapali factory makes the .315 rifle.Lots of idiots are willing to pay more for the Trichurapali made .315.The Ishapore one is much better.At least it has a proper barrel unlike the twig on the Trichurapali one.

coolaman · Post by **coolaman** » Wed Apr 04, 2012 3:46 pm

I had done few modifications to my IOF 30-06 please visit the following thread:

http://indiansforguns.com/viewtopic.php?f=13&t=17042

Katana · Post by **Katana** » Tue May 15, 2012 8:09 am

Extractor breakage problem sorted out finally! Took this long because of my pre occupation with work. An elderly gunsmith made a new one for me in one day flat! These oldies sure know their way.

Will update with details later.

jashwantsinh · Post by **jashwantsinh** » Tue May 15, 2012 10:51 am

Congrates Katanaji,

Hope to have shooting fun again at the old site where we went some time back, as you are out of
worry to get your the 30-06 Rifle fully OK to shoot.

Awaiting with details and pics as well eagerly.

bishnoi29 · Post by **bishnoi29** » Thu May 31, 2012 2:33 am

winnie_the_pooh wrote:
carbine wrote:what is difference between 30-06 rifle manufactured by rifle factory of tiruchirapalli and rifle factory of ISHAPORE ,which make better rifle
30-06 rifles are made in Isahpore.Trichurapali factory makes the .315 rifle.Lots of idiots are willing to pay more for the Trichurapali made .315.The Ishapore one is much better.At least it has a proper barrel unlike the twig on the Trichurapali one.

winnie as far as ordinance factory details both factories made .30-06
check this out
http://ofb.gov.in/index.php?wh=contactus&lang=en

now check that both factories mention that they made .30-06 !!
now please share your valuable views SIR

winnie_the_pooh · Post by **winnie_the_pooh** » Thu May 31, 2012 11:04 am

bishnoi29 wrote:now check that both factories mention that they made .30-06 !!
now please share your valuable views SIR

I have no views on OFT making the 30-06 rifle.I have so far not seen any 30-06 rifle made by this factory.I have seen the .315 rifle made by them and if the RFI made .315 is bad,the one made by OFT is trash.People, somehow,are willing to pay more for the OFT .315. Just proves the old adage, 'A fool and his money are soon parted'.

Safarigent · Post by **Safarigent** » Thu May 31, 2012 1:40 pm

Hi wtp,
With the dismal conditions of iof weapons, is there any discernible difference at all between the products of various factories?

winnie_the_pooh · Post by **winnie_the_pooh** » Thu May 31, 2012 1:55 pm

Safarigent,

The OFT made .315 has a twig for a barrel.The cut in the receiver for ejecting spent casings is missing.The receiver is not properly machined to feed .315 cartridges ( it is still set up for the 303 cartridge) in either the OFT or RFI made rifles.So they do not feed from the left.The way the follower is set up in the OFT rifle,I would expect jamming to be an issue.

However the OFT rifle is painted better than the RFI one and so the premium by dealers that the gullible are willing to pay.

Safarigent · Post by **Safarigent** » Thu May 31, 2012 2:06 pm

Ah, ofcourse a paint job really helps things.

Thanks for that.
Tell me one more thing and this is going OTT,
are crown protectors important, and if so why dont i find companies selling them online?

Indians For Guns

Indians For Guns

IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle

Re: IOF 30-06 Rifle