Design proposals for the IFG members knife.

snIPer · Post by **snIPer** » Fri Sep 19, 2008 11:30 am

May i add to that
too many cooks ......... broth, and all that ends up is froth

ajikappil · Post by **ajikappil** » Sat Sep 27, 2008 3:21 pm

Guys, Pardon my Impatience...But is this ever gonna materialize ????

We blame OFB for the delay in introducing the new Steel Frame .22 Revolver....See the Sad State of Affairs here....Even the Design Phase is not Over

!!!

Best Option would be a Poll to decide who will Design the Knife.....

TenX · Post by **TenX** » Sat Sep 27, 2008 5:07 pm

ajikappil.
GO ahead and take the lead dude.. you do the polls and get us to decide

TenX · Post by **TenX** » Sat Sep 27, 2008 5:12 pm

I guess that the cumulative input from everyone should reach a stage enough to become an impetus for this task to reach certainty.
I am sure you are doing your bit by pushing it, but we need a little more strength in direction and decision... Hope I am clear dude...

ajikappil · Post by **ajikappil** » Mon Sep 29, 2008 8:08 pm

TenX, I am a just a Trainee...There are Gurus/Veterans here with 100 times my Knowledge whom I am sure will be able to decide upon a Design within a Week !!!

However, it is for sure that everybody's design inputs cannot be satisfied...Let the Veterans Decide....

For anything to materialize Sacrifices are unaviodable !!!

Whatever, be may be the Final Decision, I will be glad place my order for one unless it looks like a Kitchen Knife....

TenX · Post by **TenX** » Mon Sep 29, 2008 10:22 pm

ajikappil";p="54506 wrote: ... unless it looks like a Kitchen Knife....

msandhu · Post by **msandhu** » Tue Sep 30, 2008 12:45 am

Maybe we can use Jonah Bowie as IFG knife..
Cheers
Mandeep

TenX · Post by **TenX** » Tue Sep 30, 2008 12:51 am

msandhu";p="54523 wrote: Maybe we can use Jonah Bowie as IFG knife..
Cheers
Mandeep

Not a bad idea at all

Maybe the blade could be made a wee bit smaller too

ajikappil · Post by **ajikappil** » Tue Sep 30, 2008 6:45 pm

Jonah's Bowie Rocks......I will be happy his design will be accepted...As TenX said, The Blade length may have to be reduced by an Inch or Two..Well , Thatz upto Jonah to decide.....

shadow · Post by **shadow** » Mon Dec 29, 2008 11:41 pm

Any updates on IFG's knife? The last post is on 30th Sep...

Post by **Yaj** » Mon Dec 29, 2008 11:59 pm

ajikappil";p="54506 wrote: I will be glad place my order for one unless it looks like a Kitchen Knife....

Ironic isn't it? Considering the original Bowie looked like a giant carving knife

Regards,
Yaj.

Mo · Post by Mo » Tue Dec 30, 2008 1:20 am

Dunno if this is still an active post. But I had some free time today and thought I'll contribute a design.

I got the basic sketch of the knife online, but made major changes to the design. Here's the end product:

It'll be a full metal construction with provision for inserts in the handle if preferred. The blade is attached using flush fitted allen heads. This provides an option of having multiple blades for one handle. The blade attach point will have grooves cut on the inside along which the blade will be slid and attached using the screws.

I dont know if this is a feasible design. But I'm going to try and see if someone can get it made..

Even if the different blade idea is something too difficult to make, the idea can be chucked for a fixed blade design.

In case anybody's curious, this is what I used as the donor image:

Comments welcome!!

TenX · Post by **TenX** » Tue Dec 30, 2008 9:10 am

Novel indeed.. but practical?

IMHO, the blade can be made more sturdy if it has a branch that inserts into the handle as well, along with the screws... This may give it overall strength than just depending on the poor little small screws to take all the runt

Post by **Yaj** » Tue Dec 30, 2008 10:17 am

TenX";p="63131 wrote:depending on the poor little small screws to take all the runt

Freudian slip?

Regards,
Yaj.

Post by **TwoRivers** » Tue Dec 30, 2008 1:51 pm

Might be well to remember that the camel is a horse designed by a commitee! Cheers.

Indians For Guns

Indians For Guns

Design proposals for the IFG members knife.

Re: Design proposals for the IFG members knife.

Re: Design proposals for the IFG members knife.

Re: Design proposals for the IFG members knife.

Re: Design proposals for the IFG members knife.

Re: Design proposals for the IFG members knife.

Re: Design proposals for the IFG members knife.