Walther PPK 0.22 LR Manhurin (Made in France)

Posts related to handguns (pistols, revolvers)
sudhanshu
Learning the ropes
Learning the ropes
Posts: 20
Joined: Wed May 09, 2007 5:54 pm
Location: New Delhi

Walther PPK 0.22 LR Manhurin (Made in France)

Post by sudhanshu » Tue Jan 01, 2008 12:49 pm

Hi guys,

I ned your help in rating this weapon. Yesterday i finalised the deal for 0.22 LR Walther PPK for 6L. The gun is silver plated with serial number 100737. Can anyone tell me is it worth buying the gun and rating for the same. As i need to make the final payment and take the delivery. The other option was Llama 0.32 and 0.32walther PPK .32.

An early response will be appreciated.

cheers

sudhanshu

For Advertising mail webmaster
User avatar
mundaire
We post a lot
We post a lot
Posts: 5410
Joined: Mon May 22, 2006 5:53 pm
Location: New Delhi, India
Contact:

Post by mundaire » Tue Jan 01, 2008 2:00 pm

You haven't mentioned the prices at which the .32 pistols are being offered to you... for any sort of self-defence use the .32 ACP cartridge would be substantially superior to the .22 LR...

Which one of the 3 pistols mentioned should you go for? It all depends on condition and price...

Cheers!
Abhijeet
Like & share IndiansForGuns Facebook Page
Follow IndiansForGuns on Twitter

FIGHT FOR YOUR RIGHTS - JOIN NAGRI NOW!

www.gunowners.in

"Political tags - such as royalist, communist, democrat, populist, fascist, liberal, conservative, and so forth - are never basic criteria. The human race divides politically into those who want people to be controlled and those who have no such desire." -- Robert Heinlein

james
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 347
Joined: Sun Jul 22, 2007 1:30 am
Location: INDIA

Re: Walther PPK 0.22 LR Manhurin (Made in France)

Post by james » Tue Jan 01, 2008 11:55 pm

Walther ppk are good for status symbol in India, the fact still remains that they are prone to jamming ,this is purely my experience and you guys would be surprised to know that to fill my pistol licence , i bought 2002 IOF pistol for 80k ,shot 50 rounds in rifle club and no problem, this type of results were never gathered from PPK , may be i am lucky enough to get the good piece.Given this to pistolsmith for major makeover and would post the pictures once i get it. Sudhanshu ,whatever you buy just fire 50 shots before paying ,i know the cartrige limits but where there is a will there is a way...Cheers James....

sudhanshu
Learning the ropes
Learning the ropes
Posts: 20
Joined: Wed May 09, 2007 5:54 pm
Location: New Delhi

Re: Walther PPK 0.22 LR Manhurin (Made in France)

Post by sudhanshu » Tue Jan 01, 2008 11:56 pm

Hi,

The 0.32 llama was offered for 7.5 L and the 0.32 Walther was also offered at same price. The irony was that the same llama i saw 8 month back was offered to me for 4.5 L. I have selected the .22 Walther PPK for now but m confused. need your advice as the difference is only 1.5 L between the two.

How would u rate the 0.22 LR. Is it reliable gun ?? The plus point i like bout this gun is its colour i.e. silver and the guy told me that it won't get rusted as its alloy.

As far as the conditions are concerned, they look pretty neat. Maybe they are reblued.. can't make out.

User avatar
Risala
Shooting true
Shooting true
Posts: 916
Joined: Fri Mar 02, 2007 12:24 am
Location: Khurpatal

Re: Walther PPK 0.22 LR Manhurin (Made in France)

Post by Risala » Fri Jan 04, 2008 12:43 pm

6 L for a .22 :shock: ,you are getting ripped off,but then may be you want to.

I know the dealer he keeps good stuff but not the best bloke to deal with,the Llama's are NIB,picked up from the STC auction.

In your budget you should be able to pick up almost anything,look around,make a few calls and dont delay,the longer you wait the higher will be the price.

Good luck.

Sanjay

sudhanshu
Learning the ropes
Learning the ropes
Posts: 20
Joined: Wed May 09, 2007 5:54 pm
Location: New Delhi

Re: Walther PPK 0.22 LR Manhurin (Made in France)

Post by sudhanshu » Sat Jan 05, 2008 7:56 pm

Hi Sanjay,

Can you pls let me know the dealer's name. How much the Llama should cost (STC auction 1).

cheers

sudhanshu

biking3819
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 428
Joined: Thu Mar 15, 2007 10:26 am
Location: Pune,INDIA
Contact:

Re: Walther PPK 0.22 LR Manhurin (Made in France)

Post by biking3819 » Sat Jan 05, 2008 8:19 pm

a month back a friend of mine got a 32 ribbed llama for 4lacs,very nice condition...
these days it seems a lotof auction being going on for the new ones with the state trading corporation.
does anybody has any idea/info, from where do these handguns land up with the stc for the auctions.
regards sanjiv

penpusher

Re: Walther PPK 0.22 LR Manhurin (Made in France)

Post by penpusher » Sun Jan 06, 2008 12:24 am

A lot is made about the 'condition' of a firearm.What people talk about is how the firearm looks cosmetically.Personally I would not mind a firearm with all its bluing rubbed off as long as the firearm has been maintained properly and save a lot of money in the process.People also talk about whether the firearm is in 'original' condition or not read repaired or reblued.As long as the repair /bluing has been undertaken by some one who knows his job,it makes no difference to the reliability/serviceability of the firearm.

Grumpy
Old Timer
Old Timer
Posts: 2653
Joined: Sat Jun 03, 2006 12:43 am
Location: UK

Re: Walther PPK 0.22 LR Manhurin (Made in France)

Post by Grumpy » Sun Jan 06, 2008 3:17 am

"for any sort of self-defence use the .32 ACP cartridge would be substantially superior to the .22 LR... "

It isn`t you know.
The .32acp is a hopeless manstopper. A real fart in a thunderstorm calibre.

User avatar
mundaire
We post a lot
We post a lot
Posts: 5410
Joined: Mon May 22, 2006 5:53 pm
Location: New Delhi, India
Contact:

Post by mundaire » Sun Jan 06, 2008 1:01 pm

Grumpy";p="34591 wrote:"for any sort of self-defence use the .32 ACP cartridge would be substantially superior to the .22 LR... "

It isn`t you know.
The .32acp is a hopeless manstopper. A real fart in a thunderstorm calibre.
Not a manstopper, sure... but it produces more energy than a .22 LR! Which is the point I was making... It's purely a matter of picking out the best one can from a bad deal (the situation in India)...

Cheers!
Abhijeet
Like & share IndiansForGuns Facebook Page
Follow IndiansForGuns on Twitter

FIGHT FOR YOUR RIGHTS - JOIN NAGRI NOW!

www.gunowners.in

"Political tags - such as royalist, communist, democrat, populist, fascist, liberal, conservative, and so forth - are never basic criteria. The human race divides politically into those who want people to be controlled and those who have no such desire." -- Robert Heinlein

Grumpy
Old Timer
Old Timer
Posts: 2653
Joined: Sat Jun 03, 2006 12:43 am
Location: UK

Re: Walther PPK 0.22 LR Manhurin (Made in France)

Post by Grumpy » Sun Jan 06, 2008 11:12 pm

Abhijeet, the .32acp produces c. 125-130 ft lbs ME. A Hyper velocity .22 lr - such as the CCI Stinger - produces 191 ft lbs ME from a c. 22" barrel and around 130 ft lbs from a 5-6" barrel.
The 60-70 gr low velocity .32 acp might deliver a little more `KO` factor but it`s nominal/notional.......I`ll also take a bet that the only .32 acp ammo available to you are round nose solids - the Stngers and similar are hollowpoints which transfer energy far more effectively.
Given the choice, I`d pick a 6" barrelled .22 lr revolver because it`s multi-purpose - you can use it for home defence purposes, at the range and for hunting/plinking. Load it with target ammo for range use, Hyper Velocity ammo for home defence and cheapo stuff for plinking.
One other factor is that I`ll bet .22 lr ammo is less expensive than .32 acp in India.
In your circumstances I reckon the .22 lr is the better choice - and if I had to trust my life to either I`d pick a .22 revolver loaded with hyper velocity hollowpoints over a .32acp semi-auto any - and every - day of the week.

User avatar
mundaire
We post a lot
We post a lot
Posts: 5410
Joined: Mon May 22, 2006 5:53 pm
Location: New Delhi, India
Contact:

Post by mundaire » Sun Jan 06, 2008 11:42 pm

Grumpy,

First lets look at Indian made ammo (.32 ACP vs. .22 LR) - which is what is most widely available and what the vast majority of people would be using, due to cost/ availability factor. There is simply NO hi-velocity OR hyper velocity .22 LR ammo made in India. And yep, the .32 ACP ammo made here is round nosed full metal jacketed. Considering the standard .32 ACP & .22 LR ammo made by IOF, the .32 ACP would most certainly have superior ME. While the IOFB website does not give complete details, it does offer the following information -

.32 ACP - projectile velocity at 9m (30 ft) - 950 ± 50 ft./Sec (290 ± 15.2 m/Sec)

.22 LR - projectile velocity at 9m (30 ft) - 1000 ± 75 ft./Sec (305 ± 23 m/Sec)

I hear imported .32 ACP ammo is available from time to time, but this is quite expensive and once again IIRC is round nosed full metal jacketed. I am told .22 LR CCI Stingers are also available from time to time but very few dealers would have them in stock, also I am not sure that they would be completely safe to use in the .22 LR Walther PPK being discussed above.

Cheers!
Abhijeet
Like & share IndiansForGuns Facebook Page
Follow IndiansForGuns on Twitter

FIGHT FOR YOUR RIGHTS - JOIN NAGRI NOW!

www.gunowners.in

"Political tags - such as royalist, communist, democrat, populist, fascist, liberal, conservative, and so forth - are never basic criteria. The human race divides politically into those who want people to be controlled and those who have no such desire." -- Robert Heinlein

penpusher

Re: Walther PPK 0.22 LR Manhurin (Made in France)

Post by penpusher » Mon Jan 07, 2008 12:11 am

A handgun in India would also be used for Concealed Carry .Most Indians would not have th luxury of owning 2 handguns because of the prohibitive cost of getting even one and also the near impossibility of most Indians to get permission to buy a second handgun.A revolver with a 6" barrel is not exactly easy to conceal or carry.

Grumpy
Old Timer
Old Timer
Posts: 2653
Joined: Sat Jun 03, 2006 12:43 am
Location: UK

Re: Walther PPK 0.22 LR Manhurin (Made in France)

Post by Grumpy » Mon Jan 07, 2008 12:54 am

60 gr bullet @ 950 fps = 120 ft lbs.
70 gr bullet @ 950 fps = 140 ft lbs.

The +/- 50 fps variation is worrying.....and rather extreme. I`d be much more inclined to believe the - 50 fps figure.
The mean figures generally quoted for the .32 acp are c. 970 fps for the 60 gr bullet and 905 fps for the 71 gr bullet - and those are MUZZLE velocity figures.

I wouldn`t recommend the use of hyper velocity ammo in a .22 lr semi-auto pistol either - unless the manufacturer specifically states the the pistol is suitable for use with such ammo.....and plenty of .22 semi-autos ARE suitable for use with Hyper Velocity ammo.

As regards the Walther PPK .22LR I wouldn`t advise its use in a defensive role anyway because it IS notoriously unreliable as several members have pointed out.

As it happens I wouldn`t advise the use of a semi-auto for home defence use anyway. One jam and you are fu**ed ! If you can only have one gun get a revolver. If a revolver misfires you just pull the trigger again and fire the next cartridge - NOT an option with a semi-auto.

Not only is the .32 acp a hopeless man-stopper, solid jacketed bullets are also hopeless manstoppers. Energy figures mean nothing if that energy is not transferred to the target and jacketed solids are very inefficient in that respect.

As regards the cost and availability of .22 lr Hyper Velocity ammunition just remember that you only need buy one box - ever. In fact a group of friends can buy one box of CCI Stingers and share the contents out. The odds that you`ll ever need to use them are remote so a cylinder full is adequate - which means that the cost can be spread amongst 8 people. You don`t need them for target shooting or plinking so much cheaper ammunition can be used for those purposes.

I`ll repeat myself: For home defensive use a 6" barrelled .22 revolver loaded with Hyper Velocity hollowpoint ammunition is a better option than the pathetic .32 acp.
It would be a different matter if you had access to the defensive loads available in the US - but you don`t so the matter doesn`t arise.

Grumpy
Old Timer
Old Timer
Posts: 2653
Joined: Sat Jun 03, 2006 12:43 am
Location: UK

Re: Walther PPK 0.22 LR Manhurin (Made in France)

Post by Grumpy » Mon Jan 07, 2008 1:05 am

Sorry penpusher - you posted whilst I was typing.
You know my reponse to your point anyway: If you have to carry the gun get a 4" barrelled .22 lr revolver loaded with Hyper Velocity hollowpoints. Still a better option than the .32acp.
By the way, anyone who thinks that they can easily access a gun from a `concealed` carry without adequate training and practice is fooling themselves.

Post Reply