Issue with SDB_XENA

[Zulfikker]

Sir,
One prob noticed . I informed Sudipto Da (SDB) too but didn't get any reply .

Issue in brief : Auto Safety not work_ found its already OFF . No need to OFF it manually at the time of shooting.

Frequency: After each 15-18 corking
Gun: SDB_XENA_177 , DOP: April 2021, Kolkata
Gun SL No: E00 series production no
Status: Is near to deliver 1000 shots shortly

Is it an issue ? Or it's a common characteristic of XENA ?

Rgds


Sent from my Redmi 5 using Tapatalk

[Rudransh]

Sir,
One prob noticed . I informed Sudipto Da (SDB) too but didn't get any reply .

Issue in brief : Auto Safety not work_ found its already OFF . No need to OFF it manually at the time of shooting.

Frequency: After each 15-18 corking
Gun: SDB_XENA_177 , DOP: April 2021, Kolkata
Gun SL No: E00 series production no
Status: Is near to deliver 1000 shots shortly

Is it an issue ? Or it's a common characteristic of XENA ?

Rgds
Hello Friend
I have xena from first batch and I can relate to the issue u r facing but when I looked for the reason I laughed at my foolishness.. In xena after cocking there is still 3 or 4 mm space is remained which needed to be pressed to engage auto safety so u try this when u cock the gun and it gets cocked pull the barrel down for another 3 or 4 mm down and see if it's engaging safety or not then let us know ur finding.

Hope it helps

Regards
Veerbhadra

Sent from my Redmi 5 using Tapatalk

[Zulfikker]

Thanks Dada,

Thanks a lot . Let me try with your trick. I vil update u soon .


Rgds
ZA

Sent from my Redmi 5 using Tapatalk

[Zulfikker]

Sir,
One prob noticed . I informed Sudipto Da (SDB) too but didn't get any reply .

Issue in brief : Auto Safety not work_ found its already OFF . No need to OFF it manually at the time of shooting.

Frequency: After each 15-18 corking
Gun: SDB_XENA_177 , DOP: April 2021, Kolkata
Gun SL No: E00 series production no
Status: Is near to deliver 1000 shots shortly

Is it an issue ? Or it's a common characteristic of XENA ?

Rgds
Hello Friend
I have xena from first batch and I can relate to the issue u r facing but when I looked for the reason I laughed at my foolishness.. In xena after cocking there is still 3 or 4 mm space is remained which needed to be pressed to engage auto safety so u try this when u cock the gun and it gets cocked pull the barrel down for another 3 or 4 mm down and see if it's engaging safety or not then let us know ur finding.

Hope it helps

Regards
Veerbhadra

Sent from my Redmi 5 using Tapatalk

By the way,
Veerbhadra Da your new GM10XS is [emoji177][emoji178][emoji177]

Rgds
ZA

Sent from my Redmi 5 using Tapatalk

[Zulfikker]

Thanks Veerbhadra Da,

Issue resolved [emoji1] by following your trick.

Rgds
ZA

Sent from my Redmi 5 using Tapatalk

[Rudransh]

Thanks Veerbhadra Da,

Issue resolved [emoji1] by following your trick.

Rgds
ZA

Sent from my Redmi 5 using Tapatalk

There u go now enjoy shooting.

Regards
Veerbhadra