Review: Precihole PX100 Achilles

[Jagannatha]

Hey guys!
Just want to share with you some pictures of my new home made sound moderator for PX100.
Inside cups and tube are 3D designed and printed. The outer tube is made of carbon fiber. 3D printed parts were glued inside carbon tube with epoxy.
Moderator works just perfect. It is really quite. Also if we compare it with my previous steel/aluminum one they are of the same design (4 cm space after muzzle plus 4 cups) but the new one is 3 times lighter.

[gmodgil]

Hello all,
I recently Baught the PX100 Achilles. While i am having fun with it, I noticed a small development oversight. Not sure if this is intentional.
While the Rifle comes with Rear peep sight by default, the Front Peep sight adaptor is surprisingly missing for PX100.
Support says adaptor for px100 not availble, while it is available for the Spring Cousins. So Front Peep Sight not possible for PX100.
Would be Happy if Experts in the Group can provide a Workaround.
Thanks,
Gaurav Modgil

[Bishop]

Hello all,
I recently Baught the PX100 Achilles. While i am having fun with it, I noticed a small development oversight. Not sure if this is intentional.
While the Rifle comes with Rear peep sight by default, the Front Peep sight adaptor is surprisingly missing for PX100.
Support says adaptor for px100 not availble, while it is available for the Spring Cousins. So Front Peep Sight not possible for PX100.
Would be Happy if Experts in the Group can provide a Workaround.
Thanks,
Gaurav Modgil

PX100 Achilles barrel is of smaller Outer-diameter compared to their breakbarrels and PX100 Match pro.If you wish to install front peep sight, you'll need custom adapter.You cannot use Precihole adapter.

[Jagannatha]

Now working on the speed regulator. The idea is taken from other brands - you have a screw and you rotate it to adjust the velocity without disassembling the rifle. Turning the screw effects the tension of the hammer spring. Will share the details soon.
The propose is - find your best point of impact with different pellets and speeds without disassembling.

[dipankar4u]

Hey guys!
Just want to share with you some pictures of my new home made sound moderator for PX100.
Inside cups and tube are 3D designed and printed. The outer tube is made of carbon fiber. 3D printed parts were glued inside carbon tube with epoxy.
Moderator works just perfect. It is really quite. Also if we compare it with my previous steel/aluminum one they are of the same design (4 cm space after muzzle plus 4 cups) but the new one is 3 times lighter.
[/quo

May I get the contact details for getting this 3D printed modarator?

[snIPer]

Excellent, please do let us know how this works out.
/S

Now working on the speed regulator. The idea is taken from other brands - you have a screw and you rotate it to adjust the velocity without disassembling the rifle. Turning the screw effects the tension of the hammer spring. Will share the details soon.
The propose is - find your best point of impact with different pellets and speeds without disassembling.

[Babygun007]

Dear Sirs,

Do we need to empty the cylinder for changing hammer spring in px100 or we can do it even there is air in the cylinder, provided not touching any part except hammer spring section.

Please advise.

[Rudransh]

Dear Sirs,

Do we need to empty the cylinder for changing hammer spring in px100 or we can do it even there is air in the cylinder, provided not touching any part except hammer spring section.

Please advise.

Hammer spring can be changed without emptying air tank.
Regards
Veerbhadra

[Babygun007]

Thanks!

[Mashiro]

Now working on the speed regulator. The idea is taken from other brands - you have a screw and you rotate it to adjust the velocity without disassembling the rifle. Turning the screw effects the tension of the hammer spring. Will share the details soon.
The propose is - find your best point of impact with different pellets and speeds without disassembling.

Hi bro Jagan.. can I get in touch with you through fb/insta?

[Jagannatha]

Hi bro Jagan.. can I get in touch with you through fb/insta?

You can ask any question here or send me a personal message.

[Kharsang]

Hi... Can someone please tell me if the diameters of long and short barrel variants of PX100 the same? Are the barrels interchangeable?
Thanks

[Jagannatha]

Hi... Can someone please tell me if the diameters of long and short barrel variants of PX100 the same? Are the barrels interchangeable?
Thanks

Asked the same from Precihole. They are not of the same dia. PX100 Achilles Classic is 12cm. Club version had larger dia. I guess something like 13 or 14cm.

[manubopaiah]

Hey guys!
Just want to share with you some pictures of my new home made sound moderator for PX100.
Inside cups and tube are 3D designed and printed. The outer tube is made of carbon fiber. 3D printed parts were glued inside carbon tube with epoxy.
Moderator works just perfect. It is really quite. Also if we compare it with my previous steel/aluminum one they are of the same design (4 cm space after muzzle plus 4 cups) but the new one is 3 times lighter.

Could you please share the 3d printing files for the suppressor you made so we could also get them made... Please

[goluman]

i bought a px 100 in september, having low shot count/poor accuracy /hammer spring issues myself.reading the forum i think this is a more common issue .Anyway replaced the hammer spring with genuine spare from precihole and tested today,same shot count of 40 ~ instead of 70 + as advertised .Will wait for my chrony to arrive before i modify the spring(was advised by Precihole to cut down one turn.)filling the gun with a 3 stag hand-pump every 40 shots is a pain.Am seriously considering a GARE BHIM or an imported regulated pcp with higher shot count.
If anyone has faced a low shot count problem with px100 and resolved it pls let me know.
Regards