LLAMA .32 MAINTENENCE AT FIELD

Discussions related to firearms that do not fit in anywhere else.
Post Reply
DEBAETE
Fresh on the boat
Fresh on the boat
Posts: 4
Joined: Wed Nov 20, 2019 10:20 pm

LLAMA .32 MAINTENENCE AT FIELD

Post by DEBAETE » Sun Jun 06, 2021 9:41 pm

Hello Freinds,
I have been using llama .32 since couple of years, during early days I had used indian kf ammo and found it un reliable, so I tried geeco, s&b, Hornady ammos and satisfied with its power and reliability. Still for target practice I often use kf due to its low cost. Even in newly purchased kf ammo few round often miss.
So I need suggestions from my friends that πŸ‘‰ 1. is it due to low quality of ammo or due to my llama firing pin or hammer isn't striking with sufficient force. 2. Also if anyone can pls tell how to change firing pin at field and give tension in hammer spring.

Because I located in outreach places of arunachal near Chinese border these repair work is very much necessary for me. I usually do Field stripping only for oiling.
THANKS IN ADVANCE πŸ™

For Advertising mail webmaster
marksman
Shooting true
Shooting true
Posts: 752
Joined: Tue Mar 13, 2007 8:28 pm
Location: India

Re: LLAMA .32 MAINTENENCE AT FIELD

Post by marksman » Mon Jun 07, 2021 8:43 pm

Its the IOF ammo that is generally to blame, and not your pistol I suppose and hope. The rim thickness and shell measurement varies due to worn out machinery. Even the 9mm IOF ammo is known to misbehave in Govt issued Glock pistols. My advise would be to use up IOF ammo on target/plinking and make a habit of keeping a fresh clip loaded with quality imported ammo when you carry it for protection. Ammo costing couple of thousand Rs. is nothing compared to your life.

Marksman

User avatar
Vineet
Veteran
Veteran
Posts: 1430
Joined: Fri Jul 11, 2008 11:09 am
Location: Punjab

Re: LLAMA .32 MAINTENENCE AT FIELD

Post by Vineet » Tue Jun 08, 2021 9:26 am

DEBAETE wrote: ↑
Sun Jun 06, 2021 9:41 pm
1. is it due to low quality of ammo or due to my llama firing pin or hammer isn't striking with sufficient force.
If the KF round is not going off and you are getting light hit on the primer then definitely you need to change the hammer spring.
DEBAETE wrote: ↑
Sun Jun 06, 2021 9:41 pm
Also if anyone can pls tell how to change firing pin at field and give tension in hammer spring.
There must be videos on YouTube on how to remove firing pin. Hammer spring tension can not be increased, it needs to be replaced by new one.
Vineet Armoury
Arms, Ammunition & Accessories.

marksman
Shooting true
Shooting true
Posts: 752
Joined: Tue Mar 13, 2007 8:28 pm
Location: India

Re: LLAMA .32 MAINTENENCE AT FIELD

Post by marksman » Tue Jun 08, 2021 11:36 am

Yes but hard primers can also lead to light FP hits. Besides, a new spring is a small price to pay for a life saving tool.

Marksman

User avatar
Vineet
Veteran
Veteran
Posts: 1430
Joined: Fri Jul 11, 2008 11:09 am
Location: Punjab

Re: LLAMA .32 MAINTENENCE AT FIELD

Post by Vineet » Tue Jun 08, 2021 11:38 am

marksman wrote: ↑
Tue Jun 08, 2021 11:36 am
Yes but hard primers can also lead to light FP hits.
But there is no such problem faced when firing KF ammo in IOF pistol so I guess it's the problem with OP's pistol. Also we should keep in mind that his Llama pistol will easily be 60-70 years old so spring wearing out is highly possible.
marksman wrote: ↑
Tue Jun 08, 2021 11:36 am
Besides, a new spring is a small price to pay for a life saving tool.
Marksman
Unfortunately these springs are not easily available in India as importing any type of firearms part is not allowed.
Vineet Armoury
Arms, Ammunition & Accessories.

Ram8055
Fresh on the boat
Fresh on the boat
Posts: 8
Joined: Tue Jun 01, 2021 4:30 am

Re: LLAMA .32 MAINTENENCE AT FIELD

Post by Ram8055 » Tue Jun 08, 2021 1:42 pm

I think we cant directly import arms. You can contact with a class A importer who is holding a license for import guns

winnie_the_pooh
Veteran
Veteran
Posts: 1767
Joined: Fri Aug 21, 2009 1:49 pm

Re: LLAMA .32 MAINTENENCE AT FIELD

Post by winnie_the_pooh » Wed Jun 09, 2021 9:40 pm

Ram8055 wrote: ↑
Tue Jun 08, 2021 1:42 pm
I think we cant directly import arms. You can contact with a class A importer who is holding a license for import guns
No,not everyone can.

Ram8055
Fresh on the boat
Fresh on the boat
Posts: 8
Joined: Tue Jun 01, 2021 4:30 am

Re: LLAMA .32 MAINTENENCE AT FIELD

Post by Ram8055 » Thu Jun 10, 2021 10:51 pm

Do you know about buying a rifle scope from online?.
Customs send a show cause notice to me. Is rifle scopes are in the same category of a firearm?

DEBAETE
Fresh on the boat
Fresh on the boat
Posts: 4
Joined: Wed Nov 20, 2019 10:20 pm

Re: LLAMA .32 MAINTENENCE AT FIELD

Post by DEBAETE » Fri Jun 11, 2021 2:12 am

Thanks once again to all for suggestions and guidance. Jai Hind.

User avatar
Vineet
Veteran
Veteran
Posts: 1430
Joined: Fri Jul 11, 2008 11:09 am
Location: Punjab

Re: LLAMA .32 MAINTENENCE AT FIELD

Post by Vineet » Fri Jun 11, 2021 8:55 am

Ram8055 wrote: ↑
Thu Jun 10, 2021 10:51 pm
Do you know about buying a rifle scope from online?.
Customs send a show cause notice to me. Is rifle scopes are in the same category of a firearm?
Why don't you post your query in the right section i.e 'The Legal Eagle'.
Vineet Armoury
Arms, Ammunition & Accessories.

Ram8055
Fresh on the boat
Fresh on the boat
Posts: 8
Joined: Tue Jun 01, 2021 4:30 am

Re: LLAMA .32 MAINTENENCE AT FIELD

Post by Ram8055 » Fri Jun 11, 2021 3:03 pm

I apologized. Im new here i was not able to find right selection. Now I do a Google search for the " legal eagle indians for gun. And I found it. Thank you for guide me to right place.

Post Reply