[REVIEW] CombatForce M92F Airsoft Springer Pistol
- estousandy
- One of Us (Nirvana)
- Posts: 399
- Joined: Fri Oct 23, 2009 3:41 pm
- Location: KL
[REVIEW] CombatForce M92F Airsoft Springer Pistol
This is for those folks who are interested to have a 'simple high quality BB springer' which has an acceptable life expectancy. Whatever is available in country now is nowhere close to those parameters.
Shown here is the Semi-alloy YUE GE YER Combat Force BB M92FS Springer Pistol, which from how it sounds is equivalent to any no-name make. But this one is different. If not abused like crazy, it has the potential for a long life. Took some 200 shots already & is only getting better. Accuracy at 10mtrs with 0.2g BBs is acceptable. Construction is 40% metal & 60% plastic. That said, all vital parts are metal.
Ordered from HK based fasttech.com (free shipping to India), it came to me in 20 days flat without customs interception. I chose it coz it was the only good looking piece in their list & mentioned aluminium instead of the usual zinc alloy along with a name not starting with 'Galaxy' or 'G'!
http://www.fasttech.com/product/1451817 [Discontinued]
Checkout a demo here. It's not mine.
[youtube][/youtube]
Specs:
Length----------------------216mm
Weight Of Magazine------118g
Magazine Capacity--------18 rds
Hop-Up---------------------Fixed
Blowback-------------------No
Shooting Mode------------Single
Power Source--------------Spring
Power----------------------180.0 fps
Material--------------------Plastic + Aluminum Alloy
Weight---------------------458 g
The ABS mag is weighty with metal blocks inside & is comfortable with 15 BBs & might double feed after 17. Unjamming is a cakewalk though.
Slide, frame, outter barrel & the release pin (springed one) are very tough ABS plastic similar to the ones found in old panasonic tape shells. It twists rather than break. Patterned grip plates are alloy including the mag catch assembly & locking pin .
Alloy spring guide & piston
Full alloy trigger assembly (Trigger, connecting piece, piston lock & fittings). The whole unit is pretty deep & goes almost half way into the mag well.
Working metal hammer with single action operation.
Aluminium inner barrel.
A working safety in place of slide lock. This is an aluminium piece. Mine is over oiled, thus all the dust there.
The feel is pretty realistic with almost half a kilo heft & sits snug in hand. The sound is twack & doesn't feel like its gonna break next time. There is nothing much to easily break in there & is totally worth every penny spent. I might go for one more just for the kicks!
Shown here is the Semi-alloy YUE GE YER Combat Force BB M92FS Springer Pistol, which from how it sounds is equivalent to any no-name make. But this one is different. If not abused like crazy, it has the potential for a long life. Took some 200 shots already & is only getting better. Accuracy at 10mtrs with 0.2g BBs is acceptable. Construction is 40% metal & 60% plastic. That said, all vital parts are metal.
Ordered from HK based fasttech.com (free shipping to India), it came to me in 20 days flat without customs interception. I chose it coz it was the only good looking piece in their list & mentioned aluminium instead of the usual zinc alloy along with a name not starting with 'Galaxy' or 'G'!
http://www.fasttech.com/product/1451817 [Discontinued]
Checkout a demo here. It's not mine.
[youtube][/youtube]
Specs:
Length----------------------216mm
Weight Of Magazine------118g
Magazine Capacity--------18 rds
Hop-Up---------------------Fixed
Blowback-------------------No
Shooting Mode------------Single
Power Source--------------Spring
Power----------------------180.0 fps
Material--------------------Plastic + Aluminum Alloy
Weight---------------------458 g
The ABS mag is weighty with metal blocks inside & is comfortable with 15 BBs & might double feed after 17. Unjamming is a cakewalk though.
Slide, frame, outter barrel & the release pin (springed one) are very tough ABS plastic similar to the ones found in old panasonic tape shells. It twists rather than break. Patterned grip plates are alloy including the mag catch assembly & locking pin .
Alloy spring guide & piston
Full alloy trigger assembly (Trigger, connecting piece, piston lock & fittings). The whole unit is pretty deep & goes almost half way into the mag well.
Working metal hammer with single action operation.
Aluminium inner barrel.
A working safety in place of slide lock. This is an aluminium piece. Mine is over oiled, thus all the dust there.
The feel is pretty realistic with almost half a kilo heft & sits snug in hand. The sound is twack & doesn't feel like its gonna break next time. There is nothing much to easily break in there & is totally worth every penny spent. I might go for one more just for the kicks!
Last edited by estousandy on Sun Mar 27, 2016 11:39 am, edited 6 times in total.
with guns we are citizens, without we are subjects
- maheshvijay93
- Almost at nirvana
- Posts: 111
- Joined: Fri Nov 22, 2013 12:55 am
Re: Sandy's Airsoft! YUEGEYER CombatForce BB M92FS Spring Pi
Hey estousandy!
What's your opinion about these m92 replicas?
http://shop.ehobbyasia.com/pistols-gbb- ... twXZb23TFo
shop.ehobbyasia.com/tokyo-marui-m92f-spring-pistol-high-grade-hop-up-version.html#.UtwXer23TFo
What's your opinion about these m92 replicas?
http://shop.ehobbyasia.com/pistols-gbb- ... twXZb23TFo
shop.ehobbyasia.com/tokyo-marui-m92f-spring-pistol-high-grade-hop-up-version.html#.UtwXer23TFo
- maheshvijay93
- Almost at nirvana
- Posts: 111
- Joined: Fri Nov 22, 2013 12:55 am
- kiran2608
- Almost at nirvana
- Posts: 167
- Joined: Tue Sep 14, 2010 3:58 pm
- Location: Bangalore
Re: Sandy's Airsoft! YUEGEYER CombatForce BB M92FS Spring Pi
Hi Sandy, how much have you paid for it? I mean including shipping?
Regards,
KD
Sent from my iPhone using Tapatalk
Regards,
KD
Sent from my iPhone using Tapatalk
- estousandy
- One of Us (Nirvana)
- Posts: 399
- Joined: Fri Oct 23, 2009 3:41 pm
- Location: KL
Re: Sandy's Airsoft! YUEGEYER CombatForce BB M92FS Spring Pi
I paid 20$ & nothing more.kiran2608 wrote:Hi Sandy, how much have you paid for it? I mean.....
TMs are very good, but i dont know much about the metal content in its internals especially for their low price springers. They are more accurate though. Also, ehobbyasia has a fat shipping charge to India citing customs thing. Fasttech has got free worldwide shipping in saying, although they include some in the item price.maheshvijay93 wrote:http://shop.ehobbyasia.com/tokyo-marui-m92f-spring-pis......
Last edited by estousandy on Fri May 16, 2014 11:31 am, edited 1 time in total.
with guns we are citizens, without we are subjects
- maheshvijay93
- Almost at nirvana
- Posts: 111
- Joined: Fri Nov 22, 2013 12:55 am
Re: Sandy's Airsoft! YUEGEYER CombatForce BB M92FS Spring Pi
Yeah right Sandy... Thank you
- estousandy
- One of Us (Nirvana)
- Posts: 399
- Joined: Fri Oct 23, 2009 3:41 pm
- Location: KL
Re: Sandy's Airsoft! CombatForce M92FS Springer Pistol
Disassembled & lubed the springer today. The same treatment i give to my ARs: moly, tar & green slime. Cocking & shooting are very slick now.
For 20$, this is exceptionally well built.
For 20$, this is exceptionally well built.
with guns we are citizens, without we are subjects
- estousandy
- One of Us (Nirvana)
- Posts: 399
- Joined: Fri Oct 23, 2009 3:41 pm
- Location: KL
Re: [REVIEW] CombatForce M92F Airsoft Springer Pistol
Added a 20mm short rail lying around, so the M9 is now kinda M9A1 spec. The quick detachable flashlight suits just right on this that the shorty.
with guns we are citizens, without we are subjects
- gaurav31dec
- Learning the ropes
- Posts: 25
- Joined: Tue Mar 01, 2016 9:58 pm
Re: [REVIEW] CombatForce M92F Airsoft Springer Pistol
After looking at these cool photos I thought of ordering one now. But seems I am not that lucky, this and many others are discontinued. Would any one know how to order one without running into customs issues
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk