Meet my family (Smith & Wesson, Brno, Winchester) Brno added

Discussions related to firearms that do not fit in anywhere else.
User avatar
The Doc
Veteran
Veteran
Posts: 1253
Joined: Tue Feb 13, 2007 9:25 am
Location: India.

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by The Doc » Mon Jan 07, 2013 7:24 pm

Very nice indeed. Congratulations Bowman and thanks for sharing.

best,
Rp.
It's always better to have a gun and not need it than need a gun and not have it !

For Advertising mail webmaster
User avatar
BowMan
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 445
Joined: Mon Feb 06, 2012 7:09 pm

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by BowMan » Wed Jan 09, 2013 10:20 am

Very nice indeed. Congratulations Bowman and thanks for sharing.

best,
Rp.
My pleasure Doc and thanks for liking them...

manu
Almost at nirvana
Almost at nirvana
Posts: 127
Joined: Tue Apr 08, 2008 4:23 pm
Location: U.K.

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by manu » Wed Jan 16, 2013 7:41 pm

:cpix: dear, thanks for sharing

User avatar
xl_target
Old Timer
Old Timer
Posts: 3488
Joined: Wed Jul 29, 2009 7:47 am
Location: USA

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by xl_target » Wed Jan 16, 2013 9:42 pm

liljake82 wrote:Very sharp rifle! Beautiful bluing, and while not all that fancy, an excellent piece of wood. Very nice!
Love the BRNO. As liljake says, that is a very nice piece of European Beech. Beautiful fish scale pattern!
While today's renditions of the BRNO by CZ-UB are good, they don't have that hand finished touch that the originals had.
“Never give in, never give in, never; never; never; never – in nothing, great or small, large or petty – never give in except to convictions of honor and good sense” — Winston Churchill, Oct 29, 1941

User avatar
James_Bond
Almost at nirvana
Almost at nirvana
Posts: 218
Joined: Wed Dec 19, 2012 3:31 pm

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by James_Bond » Wed Jan 16, 2013 10:00 pm

BowMan wrote:Hi Friends,

After thinking about doing this many times over I believe it is time now to introduce you to my family. As is the tradition I will begin with the youngest member which is a Smith & Wesson Model 17-3. This gun feels right at home in the family punching holes in 1.5" at 50 yards which is the minimum level of performance guaranteed by Smith & Wesson.

Connoisseurs and Smith & Wesson collectors will note that it is a pinned and recessed gun with target trigger and target hammer. The model 17 has always been the top of line as far as .22 revolvers are concerned and much as I am aware there are only 2 other guns from Smith in .22 LR which command a higher value.

The gun shoots just as well as it looks (the bore is pristine) and I hope to post some groupings as well.

I hope you enjoy meeting Mr. Smith.

:cheers:
DSC_0411.JPG
DSC_0412.JPG
DSC_0420.JPG
DSC_0424.JPG
DSC_0423.JPG
DSC_0427.JPG
(Mods - There will be some rifles coming up next. Please move this post if this is not the relevant section.
Its a very nice family friend. Congratulations
With Regards
CODE NAME BOND, JAMES BOND LICENSE TO RKBA

User avatar
BowMan
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 445
Joined: Mon Feb 06, 2012 7:09 pm

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by BowMan » Thu Jan 17, 2013 11:56 am

manu wrote::cpix: dear, thanks for sharing
Thanks manu... :D

User avatar
BowMan
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 445
Joined: Mon Feb 06, 2012 7:09 pm

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by BowMan » Thu Jan 17, 2013 12:02 pm

xl_target wrote:
liljake82 wrote:Very sharp rifle! Beautiful bluing, and while not all that fancy, an excellent piece of wood. Very nice!
Love the BRNO. As liljake says, that is a very nice piece of European Beech. Beautiful fish scale pattern!
While today's renditions of the BRNO by CZ-UB are good, they don't have that hand finished touch that the originals had.
Thanks for the appreciation XL, I am glad you like her. :D

While we in India do not have access to newer Brnos but I can understand what you say. I hear the new Winchester Model 70 is now assembeled in Portugal. Perhaps an indication that present manufacturing practices though highly precise and efficient are somewhat lacking in the personal charm of days gone by...

User avatar
BowMan
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 445
Joined: Mon Feb 06, 2012 7:09 pm

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by BowMan » Thu Jan 17, 2013 12:03 pm

James_Bond wrote:
Its a very nice family friend. Congratulations
Thanks Mr. Bond!

User avatar
dev
Old Timer
Old Timer
Posts: 2614
Joined: Wed Jun 14, 2006 5:16 pm
Location: New Delhi

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by dev » Wed Dec 11, 2013 11:08 am

Love the revolver Bowman and the BRNO is immaculate. So did you sell an arm and a leg to get them? ;-)
To ride, to speak up, to shoot straight.

User avatar
brihacharan
Old Timer
Old Timer
Posts: 3112
Joined: Fri Jan 22, 2010 3:33 pm
Location: mumbai

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by brihacharan » Wed Dec 11, 2013 12:28 pm

dev wrote:Love the revolver Bowman and the BRNO is immaculate. So did you sell an arm and a leg to get them? ;-)
:agree:
> Congrats Bowman :D
Briha

Peacefulguns
Almost at nirvana
Almost at nirvana
Posts: 136
Joined: Fri Oct 25, 2013 5:49 pm

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by Peacefulguns » Wed Dec 11, 2013 3:54 pm

Awesome. If you ever dream of selling them off, you know where to look! :D

User avatar
xl_target
Old Timer
Old Timer
Posts: 3488
Joined: Wed Jul 29, 2009 7:47 am
Location: USA

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by xl_target » Tue Dec 17, 2013 9:39 am

This one is perhaps one of the most desired .22 bolt action rifles available in India and I believe even in other countries CZ Zbrojovka or Brno as it was formerly know has a reputation for making fine, sturdy and practical firearms.
Bowman,
Just an observation.
CZ stands for Ceska Zbrojovka. A literal translation would be "Czech Arms Factory".
These were state owned concerns and were differentiated by the location of the factory.
So you had something similar to:
CZ-Strakonice (after ceasing to make arms, they made motorcycles like the famous Jawa)
CZ-Uhersky Brod ( CZ-UB; the current seller of arms on the international market)
Zbrojovka Brno (now a subsidiary of CZ_UB)
Zbrojovka Praga

As far as I know the bolt action rifles are no longer made in Brno. They make a drilling, an over-under shotgun and some break action single shot rifles. The CZ-UB models 452, 453, 455, 513 and 527 are the current Czech smallbore rifles sold in the US today.
“Never give in, never give in, never; never; never; never – in nothing, great or small, large or petty – never give in except to convictions of honor and good sense” — Winston Churchill, Oct 29, 1941

User avatar
BowMan
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 445
Joined: Mon Feb 06, 2012 7:09 pm

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by BowMan » Tue Dec 17, 2013 12:01 pm

Yes I believe you are correct XL. The Česká zbrojovka or CZ company as we know today did not exist under the communist regime. The guns then were manufactured by a number of loosely integrated units located in and around the town or Brno.

The current firearm producer CZ-Uhersky Brod or CZ-UB was incorporated in 1992. Here is what the CZ website has to say about this;
On 1 May 1992, the National Property Fund of the Czech Republic established the joint stock company Ceska zbrojovka a.s., Uhersky Brod in accordance with a privatisation project.
http://www.cz-usa.com/about-cz-ub/

Now going by the markings on my rifle it seems to belong to the Zbrojovka Brno arsenal which was set up in 1918. During the course if its existence there was a period where Zbrojovka Brno was a subsidiary of CZ-Uhersky Brod. "Monitoring developments in the Czech Republic then resulted in a good idea not to develop new own firearms but to save the promising designs of Zbrojovka Brno. BRNO RIFLES, s.r.o. was founded in spring 2004 and was acquired in November by EXIMAT, a.s., owning a majority ownership interest in Česká zbrojovka Uherský Brod. BRNO RIFLES thus became a sister company of CZUB and the “relationship” was confirmed in a way when Ing. Kamil Růžák, MBA, Member of the Supervisory Board and Safety Director of CZUB, became a Director of BRNO RIFLES."

However this arrangement did not last for reasons I do not know much of. Apparently CZ-UB sold its share in Zbrojovka Brno to a Slovak holding company called J&T in 2008.

"Present situation of Brno Rifles s.r.o.

In 2009, the company started looking for adequate premises which would replace the original production and assembly halls. This move resulted from the deteriorating condition of buildings, high overhead costs connected with the original areas, as well as the newly chosen strategy of the company.

The suitable location was chosen and approved by the superior bodies of the company. The famous tradition of Zbrojovka will therefore continue - and in BRNO."
http://www.zbrojovka-brno.cz/en/pages/340-about-us.aspx

Glad you brought up this XL...

User avatar
TC
Veteran
Veteran
Posts: 1805
Joined: Tue Dec 05, 2006 11:50 am
Location: Kolkata

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by TC » Tue Dec 17, 2013 4:05 pm

Love the last posts by XL and Bowman.... why don't Brno owners on IFG start a new thread on Brnos. It will help a lot of Indians since this rifle is still the most valued, most common in rifle clubs and yet the most expensive in the market.

TC

User avatar
BowMan
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 445
Joined: Mon Feb 06, 2012 7:09 pm

Re: Meet my family (Smith & Wesson, Brno, Winchester) Brno a

Post by BowMan » Wed Dec 18, 2013 12:44 pm

:agree:

Post Reply