The Damage that can POUNDED by a IOF ANMOL revolver

Discussions related to firearms that do not fit in anywhere else.
goodboy_mentor
Old Timer
Old Timer
Posts: 2928
Joined: Sun Dec 07, 2008 12:35 pm

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by goodboy_mentor » Thu Feb 02, 2012 10:39 pm

.32 S&W L round should not be underestimated at short ranges. Pistols firing .32 ACP round, which has ballistics very close to .32 S&W L, were favorites of "trench sweepers" for clearing the captured trenches of any remaining enemy soldiers during world war.
"If my mother tongue is shaking the foundations of your State, it probably means that you built your State on my land" - Musa Anter, Kurdish writer, assassinated by the Turkish secret services in 1992

For Advertising mail webmaster
User avatar
Top-GUN
Learning the ropes
Learning the ropes
Posts: 25
Joined: Tue Jan 31, 2012 6:50 pm

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by Top-GUN » Thu Feb 02, 2012 10:43 pm

pistolero wrote:Top-Gun, your question was very specific, damage to human being at 10 yards! from a .32 L round (Anmol Revolver)
My question to you is WHY & How did you come up with this distance? Why not 12 or 20 yards?

Its a most alarming question and I hope this was just a general query...IMHO please consider the ramifications before asking such a question


Ok ok ok ok !!!

i dont wanna be a VIGILANTE ....but i just want to be very specific with the THING i will be carrying with me !! as i have already told many of you guys,......that i havent been friendly with any SMALL ARMS ....that is the REASON why i asked this SILLY ....but a very SPECIFIC and IMPORTANT question !!


cant stop laughing at the REPLIES of my query !!
<<chidiya naal je baaj ladawan taan Gobind Singh naam dharavan>>

User avatar
Hammerhead
Shooting true
Shooting true
Posts: 607
Joined: Thu Aug 04, 2011 6:52 am
Location: Toronto

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by Hammerhead » Thu Feb 02, 2012 10:44 pm

goodboy_mentor wrote:.32 S&W L round should not be underestimated at short ranges. Pistols firing .32 ACP round, which has ballistics very close to .32 S&W L, were favorites of "trench sweepers" for clearing the captured trenches of any remaining enemy soldiers during world war.
Thomson machine gun - Haji
Last edited by Hammerhead on Fri Feb 10, 2012 2:01 am, edited 2 times in total.
The only thing necessary for the triumph of evil is for good men to do nothing. - Edmund Burke

User avatar
Top-GUN
Learning the ropes
Learning the ropes
Posts: 25
Joined: Tue Jan 31, 2012 6:50 pm

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by Top-GUN » Thu Feb 02, 2012 10:45 pm

ribaalber wrote:I don't think you are one of the reasons India has a Gun license regime...
Please be honest when you apply for the license. :-)
Tell them you really want to be a Vigilante or something like the Phantom

cant stop laughing !!


noooo !! i dont have plans to kill any one !! just asking a simple question ...does ANMOL is capable enough to save my ar*e in times of NEED ???
<<chidiya naal je baaj ladawan taan Gobind Singh naam dharavan>>

User avatar
Top-GUN
Learning the ropes
Learning the ropes
Posts: 25
Joined: Tue Jan 31, 2012 6:50 pm

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by Top-GUN » Thu Feb 02, 2012 10:47 pm

axe wrote:one of the silliest question ever asked on forum, what do you expect from a firearm, when fired at a person...... he will laugh in joy.



If he is a SUPERMAN ...he can LAUGH even .... ROFL ....after getting a HIT From a MG-16


my question is how much dmg does the ANMOL revolver PRODUCE ????
<<chidiya naal je baaj ladawan taan Gobind Singh naam dharavan>>

User avatar
Top-GUN
Learning the ropes
Learning the ropes
Posts: 25
Joined: Tue Jan 31, 2012 6:50 pm

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by Top-GUN » Thu Feb 02, 2012 10:50 pm

Vineet wrote:top-GUN: You would have got better answers to your question if you would have asked about the stopping power
of .32" S&W L round instead of the anmol revolver.

The effect of bullet injury on human being depends on a lot of factors. In the past people with bullet injuries have died when they were supposed to live and lived when they were supposed to die.

The effect of .32" round will largely depend on the shot placement. A well placed shot
on vital organs such as the brain, heart and central nervous system will stop a person
almost immediatly. A .32" caliber round has less stopping power compared to 9mm, .45
acp, .357 magnum. In US most people carry .32" as a back up and not as a primary gun.
But the situation is different in India. Here we don't have much choice and only .32"
handguns and ammo are easily available.

But then less stopping power means less recoil and therefore it becomes easy to place
shots with a .32". Lack of stopping power can be compensated with multiple hits. Therefore
the bottom line is that the shot placement is most important and to achieve that practice
regularly with your handgun.


thank you for your reply .....i want to know how much POUND of energy per square cm on human Tissue does it EXERTS when fired at a DISTANCE of 10-15-18 yards
<<chidiya naal je baaj ladawan taan Gobind Singh naam dharavan>>

User avatar
Vikram
We post a lot
We post a lot
Posts: 5107
Joined: Fri Jun 02, 2006 6:14 am
Location: Tbilisi,Georgia

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by Vikram » Thu Feb 02, 2012 11:25 pm

Topgun,

Welcome to IFG.As Vineet pointed out, please do read/familiarise with smallarms and related terms.
Specific to your question:

http://en.wikipedia.org/wiki/Stopping_power

This excellent article also has info on related subjects.You will find it quite educative.

Best-
Vikram
It ain’t over ’til it’s over! "Rocky,Rocky,Rocky....."

User avatar
Vineet
Veteran
Veteran
Posts: 1428
Joined: Fri Jul 11, 2008 11:09 am
Location: Punjab

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by Vineet » Thu Feb 02, 2012 11:53 pm

Top-GUN wrote: thank you for your reply .....i want to know how much POUND of energy per square cm on human Tissue does it EXERTS when fired at a DISTANCE of 10-15-18 yards
A .32" S&W L 98 grain bullet having velocity 230 m/s produces 115 ft.lbf of energy at the muzzle.
Vineet Armoury
Arms, Ammunition & Accessories.

User avatar
Top-GUN
Learning the ropes
Learning the ropes
Posts: 25
Joined: Tue Jan 31, 2012 6:50 pm

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by Top-GUN » Fri Feb 03, 2012 12:33 am

Vineet wrote:
Top-GUN wrote: A .32" S&W L 98 grain bullet having velocity 230 m/s produces 115 ft.lbf of energy at the muzzle.


what abt the REVOLVER made by IOF ....like .32mm revolver or the ANMOL ???


does they exerts the same FORCE ....????

plzzzz Enlighten mee !!

and thank you very much ...for ur kind reply !!
<<chidiya naal je baaj ladawan taan Gobind Singh naam dharavan>>

User avatar
xl_target
Old Timer
Old Timer
Posts: 3488
Joined: Wed Jul 29, 2009 7:47 am
Location: USA

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by xl_target » Fri Feb 03, 2012 12:40 am

what abt the REVOLVER made by IOF ....like .32mm revolver or the ANMOL ???
You will gain some velocity (and therefore energy) with a four inch barrel compared to a 2 inch barrel. See the difference between the same .22 LR round in a 2' Beretta Bobcat vs a 5" SIG 1911-22 (below). Obviously you probably might not see such a dramatic difference as the example below, but you should definitely see an improvement in ME and MV between a 2" IOF revolver and the 4" Anmol.

If you want to compare Vineets figures with other calibers:
2" .22LR handgun - shooting 32 gr. CCI Stingers, M.E. approx 68 ft. lbs.
5" .22LR handgun - shooting 32 gr. CCI stingers, M.E. approx 119 ft. lbs.

4" 9mm pistol - shooting Hornady 115 gr. FTX (Critical Defense), M.E. 332 ft. lbs.
4" .357 Mag revolver - shooting Remington 125 gr. Jacketed Soft Point., M.E. approx 684 ft. lbs.
.30-06 Rifle - shooting Remington 150 grain PSP, M.E. 2924 ft. lbs.
“Never give in, never give in, never; never; never; never – in nothing, great or small, large or petty – never give in except to convictions of honor and good sense” — Winston Churchill, Oct 29, 1941

User avatar
Top-GUN
Learning the ropes
Learning the ropes
Posts: 25
Joined: Tue Jan 31, 2012 6:50 pm

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by Top-GUN » Fri Feb 03, 2012 1:37 am

dear xl_target :


i want to know how much FORCE exerted by the IOF made REVOLVERS ....on a living TISsUE !!
<<chidiya naal je baaj ladawan taan Gobind Singh naam dharavan>>

User avatar
The Doc
Veteran
Veteran
Posts: 1253
Joined: Tue Feb 13, 2007 9:25 am
Location: India.

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by The Doc » Fri Feb 03, 2012 6:59 am

Top-GUN wrote:i want to know how much FORCE exerted by the IOF made REVOLVERS ....on a living TISsUE !!
I have a feeling that you are trolling now.
It's always better to have a gun and not need it than need a gun and not have it !

User avatar
nagarifle
Old Timer
Old Timer
Posts: 3404
Joined: Sat Oct 06, 2007 1:43 pm
Location: The Land of the Nagas

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by nagarifle » Fri Feb 03, 2012 7:14 am

Top-GUN wrote:dear xl_target :


i want to know how much FORCE exerted by the IOF made REVOLVERS ....on a living TISsUE !!
may i kindly suggest that one buys a revolver and pound someone to death and go to jail.

correct me if i am wrong, are you not talking bullshit?

please beware what you are saying/ intending, could be considered intention of battraing someone to death with a revolver. Which, if one is not aware is a criminal offence. not only that but would ruin your revolver to which i am glad you do not have one.
Nagarifle

if you say it can not be done, then you are right, for you, it can not be done.

dr.jayakumar
Veteran
Veteran
Posts: 1906
Joined: Tue Apr 06, 2010 9:55 am
Location: tamilnadu,india

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by dr.jayakumar » Fri Feb 03, 2012 9:15 am

freind,i have no good opinion on this revolver.if you look carefully you can feel that the barrel longer than other iof and lookw like someone has welded a nother 2'' or so.
if you are lucky the teget can be damaged ,if not you will be ??
sorry thats my opine.read our post on anmol revolver,you'l understand what i said'
regrds

goodboy_mentor
Old Timer
Old Timer
Posts: 2928
Joined: Sun Dec 07, 2008 12:35 pm

Re: The Damage that can POUNDED by a IOF ANMOL revolver

Post by goodboy_mentor » Fri Feb 03, 2012 9:25 am

Hammerhead wrote:No . It was .45ACP with Thomson machine gun - Haji
Nobody is saying that .32 ACP was the only cartridge used for clearing trenches. Besides .45 ACP, shotguns were also used for this purpose. Since we are discussing about hand guns in this thread, hence the mention of .32 ACP. May read this link http://www.americanrifleman.org/Webcont ... eatwar.pdf It talks about .32 ACP pistols being used for clearing trenches.
"If my mother tongue is shaking the foundations of your State, it probably means that you built your State on my land" - Musa Anter, Kurdish writer, assassinated by the Turkish secret services in 1992

Locked