9mm-meets-40-caliber

Post all jokes/ quizzes/ teasers/ 'identify this' type of posts here
Post Reply
m24
Veteran
Veteran
Posts: 1089
Joined: Tue Apr 28, 2009 3:57 pm
Location: New Delhi

9mm-meets-40-caliber

Post by m24 » Fri Jul 02, 2010 1:41 pm

9mm-and-.40-Caliber.jpg
Source: http://www.everydaynodaysoff.com/2010/0 ... 0-caliber/

Regards
You do not have the required permissions to view the files attached to this post.
Jeff Cooper advocated four basic rules of gun safety:
1) All guns are always loaded. Even if they are not, treat them as if they are.
2) Never let the muzzle cover anything you are not willing to destroy.
3) Keep your finger off the trigger till your sights are on the target.
4) Identify your target, and what is behind it.

For Advertising mail webmaster
MoA
Veteran
Veteran
Posts: 1644
Joined: Fri Apr 11, 2008 8:08 pm

Re: 9mm-meets-40-caliber

Post by MoA » Sat Jul 03, 2010 2:12 am

For those who dont understand it one off...

The .40 has a bad rap due to the Glock primarily. The chamber is unsupported, and leads to an asymetric bulge that does not get -resized correctly with traditional dies. This leads to the case being out of spec, and when reloaded tends to rupture when fired and results in a Kaboom.

But a fun cartoon none the less. :cheers:

User avatar
Baljit
Shooting true
Shooting true
Posts: 882
Joined: Tue Jun 23, 2009 8:27 am
Location: Kelowna , BC . Canada

Re: 9mm-meets-40-caliber

Post by Baljit » Sat Jul 03, 2010 7:18 am

i dont think so i have two .40cal gun [ not Glock ] and i fire over 100000 round through and never have a problam , and i reloed my own ammo .

Baljit

User avatar
HydNawab
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 476
Joined: Sat Mar 31, 2007 2:12 pm
Location: Hyderabad

Re: 9mm-meets-40-caliber

Post by HydNawab » Sat Jul 03, 2010 8:37 am

Baljit wrote:i dont think so i have two .40cal gun [ not Glock ] and i fire over 100000 round through and never have a problam , and i reloed my own ammo .

Baljit
WOW! 100000 rounds of 40 Cal. You must be a very rich man buddy. I know that a box of 40 SW (50Rds) costs about $20. Thats about $40000 for firing 100000 rounds. But keeping in mind that you reload, I am assuming that the cost comes down reasonably, say 40%-50%.

Ashar
'It takes 43 muscles to frown and 17 to smile, but only 3 for proper trigger squeeze'.

'You can get much farther with a kind word and a gun than you can with a kind word alone.'

-- Al Capone

MoA
Veteran
Veteran
Posts: 1644
Joined: Fri Apr 11, 2008 8:08 pm

Re: 9mm-meets-40-caliber

Post by MoA » Sat Jul 03, 2010 3:10 pm

Baljit wrote:i dont think so i have two .40cal gun [ not Glock ] and i fire over 100000 round through and never have a problam , and i reloed my own ammo .

Baljit
Blajit, that would depend on what pistols you have. With the Glock in particular this is a known issue, which is why the likes of RCBS and Lee have produced bulge removing dies.
Link to die
I personally know the Glock has this issue, as do some other manufacturers.

Ashar: The costs drop way more than 40-50% in most cases. For example if you're using cast bullets, and casting them yourself, a cartridge can cost well under 50 cents. While not comparing apples to apples, for my 8x60S a box of RWS ammo is about 96 Euros for twenty. I reload them for about 30 cents per cartridge (Excluding the cost of the dies and my time).

User avatar
Baljit
Shooting true
Shooting true
Posts: 882
Joined: Tue Jun 23, 2009 8:27 am
Location: Kelowna , BC . Canada

Re: 9mm-meets-40-caliber

Post by Baljit » Sat Jul 03, 2010 7:10 pm

MoA, i have a Para Ordnance 1911 , also i have a Dillon Precision XL650 reloader [ maybe you know this reloader ] and i reload about 850 to 900 round in hrs. i am useing only FMJ bullets.


Asher, keep in mind i am shooting in IPSC so i need a lot's of practices , cost for round i have a friend he is delar for the bullets so i pay the dealer price about a $80 per 1000 bullets, now you know the cost for the round.

Baljit
Last edited by Baljit on Sat Jul 03, 2010 7:23 pm, edited 1 time in total.

MoA
Veteran
Veteran
Posts: 1644
Joined: Fri Apr 11, 2008 8:08 pm

Re: 9mm-meets-40-caliber

Post by MoA » Sat Jul 03, 2010 7:15 pm

Baljit,

The 650 is a good unit. What pistols are you using?

Try Missouri Bullet Company cheaper and from what I have read about them very good to deal with. That is if you decide to switch to lead.

User avatar
Baljit
Shooting true
Shooting true
Posts: 882
Joined: Tue Jun 23, 2009 8:27 am
Location: Kelowna , BC . Canada

Re: 9mm-meets-40-caliber

Post by Baljit » Sat Jul 03, 2010 7:26 pm

MoA ,i have a Para Ordnance 1911

Baljit

MoA
Veteran
Veteran
Posts: 1644
Joined: Fri Apr 11, 2008 8:08 pm

Re: 9mm-meets-40-caliber

Post by MoA » Sat Jul 03, 2010 7:33 pm

Baljit wrote:MoA ,i have a Para Ordnance 1911

Baljit
My fault.. didnt read the post completely.

I dont use a progressive since most of my shooting is rifle. Are you using an auto case feeder? If so what has your experience with it been? Also have you modded your unit?

User avatar
Baljit
Shooting true
Shooting true
Posts: 882
Joined: Tue Jun 23, 2009 8:27 am
Location: Kelowna , BC . Canada

Re: 9mm-meets-40-caliber

Post by Baljit » Sat Jul 03, 2010 8:07 pm

MoA , this is my 650 reloader and i am using auto case feeder , i hope you like this picture

Baljit





Image

User avatar
HydNawab
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 476
Joined: Sat Mar 31, 2007 2:12 pm
Location: Hyderabad

Re: 9mm-meets-40-caliber

Post by HydNawab » Sat Jul 03, 2010 8:25 pm

Baljit wrote:MoA, i have a Para Ordnance 1911 , also i have a Dillon Precision XL650 reloader [ maybe you know this reloader ] and i reload about 850 to 900 round in hrs. i am useing only FMJ bullets.


Asher, keep in mind i am shooting in IPSC so i need a lot's of practices , cost for round i have a friend he is delar for the bullets so i pay the dealer price about a $80 per 1000 bullets, now you know the cost for the round.

Baljit
Lucky man. I thought you must have been paying through your nose for shooting such high number of rounds. My attention is diverted more towards the white tail trophy rather than the reloading set up!
'It takes 43 muscles to frown and 17 to smile, but only 3 for proper trigger squeeze'.

'You can get much farther with a kind word and a gun than you can with a kind word alone.'

-- Al Capone

MoA
Veteran
Veteran
Posts: 1644
Joined: Fri Apr 11, 2008 8:08 pm

Re: 9mm-meets-40-caliber

Post by MoA » Sat Jul 03, 2010 8:36 pm

Baljit,

One final quesstion... how does the case feeder actually work? Is the setup a a pain?

User avatar
Baljit
Shooting true
Shooting true
Posts: 882
Joined: Tue Jun 23, 2009 8:27 am
Location: Kelowna , BC . Canada

Re: 9mm-meets-40-caliber

Post by Baljit » Sat Jul 03, 2010 8:57 pm

MoA , this is the top view of the case feeder only i have to do is put case in and turn the power on whan the power on it start turn and drop the case in hole. setup is not a pain hahahahahahahaha

Baljit

Image



Image

in this picture you can see that there is pipe going down whan turn the power on case come in to this pipe and going down to shall plate after that you know what we have to do.

Image

MoA
Veteran
Veteran
Posts: 1644
Joined: Fri Apr 11, 2008 8:08 pm

Re: 9mm-meets-40-caliber

Post by MoA » Sat Jul 03, 2010 9:46 pm

Way cool. On it goes on my christmas list. :) Still cant justify it... but it will give me an excuse to buy a few pistols.

Post Reply