Page 1 of 1
Issue with SDB_XENA
Posted: Fri Jul 16, 2021 6:27 am
by Zulfikker
Sir,
One prob noticed . I informed Sudipto Da (SDB) too but didn't get any reply .
Issue in brief : Auto Safety not work_ found its already OFF . No need to OFF it manually at the time of shooting.
Frequency: After each 15-18 corking
Gun: SDB_XENA_177 , DOP: April 2021, Kolkata
Gun SL No: E00 series production no
Status: Is near to deliver 1000 shots shortly
Is it an issue ? Or it's a common characteristic of XENA ?
Rgds
Sent from my Redmi 5 using Tapatalk
Re: Issue with SDB_XENA
Posted: Wed Jul 21, 2021 11:37 am
by Rudransh
Zulfikker wrote: ↑Fri Jul 16, 2021 6:27 am
Sir,
One prob noticed . I informed Sudipto Da (SDB) too but didn't get any reply .
Issue in brief : Auto Safety not work_ found its already OFF . No need to OFF it manually at the time of shooting.
Frequency: After each 15-18 corking
Gun: SDB_XENA_177 , DOP: April 2021, Kolkata
Gun SL No: E00 series production no
Status: Is near to deliver 1000 shots shortly
Is it an issue ? Or it's a common characteristic of XENA ?
Rgds
Hello Friend
I have xena from first batch and I can relate to the issue u r facing but when I looked for the reason I laughed at my foolishness.. In xena after cocking there is still 3 or 4 mm space is remained which needed to be pressed to engage auto safety so u try this when u cock the gun and it gets cocked pull the barrel down for another 3 or 4 mm down and see if it's engaging safety or not then let us know ur finding.
Hope it helps
Regards
Veerbhadra
Sent from my Redmi 5 using Tapatalk
Re: Issue with SDB_XENA
Posted: Wed Jul 21, 2021 1:46 pm
by Zulfikker
Thanks Dada,
Thanks a lot . Let me try with your trick. I vil update u soon .
Rgds
ZA
Sent from my Redmi 5 using Tapatalk
Re: Issue with SDB_XENA
Posted: Wed Jul 21, 2021 1:52 pm
by Zulfikker
Rudransh wrote:Zulfikker wrote: ↑Fri Jul 16, 2021 6:27 am
Sir,
One prob noticed . I informed Sudipto Da (SDB) too but didn't get any reply .
Issue in brief : Auto Safety not work_ found its already OFF . No need to OFF it manually at the time of shooting.
Frequency: After each 15-18 corking
Gun: SDB_XENA_177 , DOP: April 2021, Kolkata
Gun SL No: E00 series production no
Status: Is near to deliver 1000 shots shortly
Is it an issue ? Or it's a common characteristic of XENA ?
Rgds
Hello Friend
I have xena from first batch and I can relate to the issue u r facing but when I looked for the reason I laughed at my foolishness.. In xena after cocking there is still 3 or 4 mm space is remained which needed to be pressed to engage auto safety so u try this when u cock the gun and it gets cocked pull the barrel down for another 3 or 4 mm down and see if it's engaging safety or not then let us know ur finding.
Hope it helps
Regards
Veerbhadra
Sent from my Redmi 5 using Tapatalk
By the way,
Veerbhadra Da your new GM10XS is [emoji177][emoji178][emoji177]
Rgds
ZA
Sent from my Redmi 5 using Tapatalk
Re: Issue with SDB_XENA
Posted: Wed Jul 21, 2021 4:30 pm
by Zulfikker
Thanks Veerbhadra Da,
Issue resolved [emoji1] by following your trick.
Rgds
ZA
Sent from my Redmi 5 using Tapatalk
Re: Issue with SDB_XENA
Posted: Wed Jul 21, 2021 7:49 pm
by Rudransh
Zulfikker wrote: ↑Wed Jul 21, 2021 4:30 pm
Thanks Veerbhadra Da,
Issue resolved [emoji1] by following your trick.
Rgds
ZA
Sent from my Redmi 5 using Tapatalk
There u go now enjoy shooting.
Regards
Veerbhadra