Bulk filling ideas for SSP250

[fantumfan2003]

Friends,

I want to convert my SSP250 to bulk filling. I have been looking around on the WWW.
Any ideas based around local or foreign products would be greatly appreciated.

M.

[sawbones]

Hey Fantum

I had got steyrshots tau

I made a brass bulk fill adapter so that I could fill it from an IHP co2 pistol cylinder

I had also made a jugard and posted it on this forum it used to fill from a buttler type cylinder

all you need is the right dies and taps

depends on which cylinder you can get filled easily buttler45s are easy to fill commercially or maybe you can go and buy a 30 kg cylender like i did as you have so many co2 guns

Regards sawbones

[striker]

Manish
This the idea for Bulk filling for Qb 78 but you can write to tim of mac1 for better order that fits for your ssp2250

http://www.archerairguns.com/QB78-Bulk- ... /aabfk.htm

Hope this helps a lot

[fantumfan2003]

Sankar,

Thanks, The idea is to use a 9oz or 12oz (2inch dia.) CO2 tank with pin valve (under the barrel or over the stock) instead of the usual 12gms CO2 disposable cartridge. I want to get more power from the SSP250 to give me something like 800fps (.177) with a longer barrel and modded valve. With all the mods and a 12gm cartridge my shot count will go down hence a larger tank.

M.

Manish
This the idea for Bulk filling for Qb 78 but you can write to tim of mac1 for better order that fits for your ssp2250

http://www.archerairguns.com/QB78-Bulk- ... /aabfk.htm

Hope this helps a lot

-- Sat Jul 18, 2009 21:48 --

Sawbones

Are you refering to this page and the pic you posted in it ?

http://indiansforguns.com/viewtopic.php ... 0&start=30

Unfortunately the Mr. Butler tank is too long (18in ?)

I will check with aquarium shops, they have O2 cylinders which are small. If not I will have to get a suitable cylinder from abroad.

M.

Hey Fantum

I had got steyrshots tau

I made a brass bulk fill adapter so that I could fill it from an IHP co2 pistol cylinder

I had also made a jugard and posted it on this forum it used to fill from a buttler type cylinder

all you need is the right dies and taps

depends on which cylinder you can get filled easily buttler45s are easy to fill commercially or maybe you can go and buy a 30 kg cylender like i did as you have so many co2 guns

Regards sawbones

[dev]

Hi fantum fan,

There is maxbulk in the usa or just go through the archives of the crosman forum lotsa tips in there. There is also a nine ounce paintball cylinder which may meet your needs.

dev

[fantumfan2003]

dev

This is the baby right ?



Would fit the bill perfectly. Any idea on tech. specs. ?

M.

[striker]

this may also help

http://www.crookedbarn.com/images/Valve52.jpg