Difference between Diablo and wad-cutter.

All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
Post Reply
ssshooter
Learning the ropes
Learning the ropes
Posts: 31
Joined: Mon Jan 05, 2009 1:33 pm
Location: New Delhi

Difference between Diablo and wad-cutter.

Post by ssshooter » Tue Jan 06, 2009 3:11 pm

While searching online I found these definitions of what a diablo and wad cutter pellet really is, so for those of you who didn't know here it is:

a. Diabolo. The most popular pellet design is the hourglass-shaped air rifle pellet, commonly referred to as
the diabolo. The term is derived from the pellet’s resemblance to the spool-shaped device used in an
ancient Greek throwing game called diabolo. The “waisted” design of the pellet minimizes the friction
between the pellet and the rifling. The thin hollow base (or skirt) expands during its travel down the bore
to grip the rifling grooves and to establish an effective air seal. The pellet head is slightly smaller in
diameter than the skirt and simply rides the rifle barrel lands. In a well-designed diabolo pellet, most of the
pellet weight is forward of the skirt in the head of the pellet. This gives the pellet maximum stability in
flight – similar in concept to a badminton shuttle.


b. Wadcutter. There are a number of variations on the basic diabolo design. These variations are based
upon the intended use of the pellet. For marksmanship and competition training, the wadcutter pellet is
used. This flatheaded pellet is designed for cutting neat, clean holes in paper, which allows for accurate,
precise scoring of the target. Only diabolo-design wadcutter pellets supplied by the Canadian Forces (CF)
are authorized for use in cadet air rifles. Despite its non-aerodynamic appearance, the wadcutter pellet’s
ballistics are not affected by its flathead design at distances less than 15 metres. In fact, in many
instances the wadcutter has better accuracy at short ranges, such as ten metres. Since all cadet training
and competitions use a ten-metre range, the flathead pellet design is not a factor in ballistic performance
or accuracy.

For Advertising mail webmaster
TenX
Veteran
Veteran
Posts: 1902
Joined: Sun Sep 30, 2007 3:19 pm
Location: Bangalore, INDIA
Contact:

Post by TenX » Tue Jan 06, 2009 3:20 pm

Good read. Suggest you also mention the source URL :)
Never Shave without a Blade
.......^___________________^
....../ '---_________________ ]
...../_==O;;;;;;;;_______.:/
.....),---.(_(____)/.....
....// (..) ),----/....
...//____//......
..//____//......
.//____//......
..-------

shahid

Post by shahid » Tue Jan 06, 2009 8:43 pm

From experience I mention that these H & N Match pellets can be used for hunting too.

Ask the Pigeons of Dubai whether they like H & N Match!

During a certain period when Diana Rastatt pellets were not available I regularly used them to down thousands of Pigeons at 30-35 yards with telling accuracy. There was always a list of warehouse owners who wanted some pest control.

All those modern methods of high pitch sound blasters etc. which the pest control company boys used were effective for 10 minutes after their departure.

Later I switched to H & N Field and Target.

All this was in my two .177 calibre rifles, Diana 68 and 35 classic.

striker
Shooting true
Shooting true
Posts: 704
Joined: Sun Dec 17, 2006 3:16 pm
Location: Chennai

Re: Difference between Diablo and wad-cutter.

Post by striker » Tue Jan 06, 2009 9:25 pm

yeah i agree with shahid
i use gsmith competition flat head in my cfx .177 air rifle and found accurate upto 30 m.if it is not a windy day it can perform more distance...

cheers
sankar

penpusher

Re: Difference between Diablo and wad-cutter.

Post by penpusher » Tue Jan 06, 2009 11:14 pm

shahid";p="63786 wrote: to down thousands of Pigeons at 30-35 yards
Do you still have that air powered machine gun :?:

Mo
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 436
Joined: Mon Jan 21, 2008 3:36 am
Location: Bangalore, India.

Post by Mo » Wed Jan 07, 2009 12:31 am

Do you still have that air powered machine gun

God! I love your comments!!

pkjeetesh
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 351
Joined: Mon Aug 04, 2008 11:46 am
Location: Secunderabad

Re: Difference between Diablo and wad-cutter.

Post by pkjeetesh » Wed Jan 07, 2009 12:48 am

Striker...I tried competition too in my CFX...it started to diesel...P10 fit well..it has tighter tolerances...

Post Reply