gamo breech seals

pkjeetesh · Post by **pkjeetesh** » Fri Dec 05, 2008 10:50 am

dear Thirths....ive ordered for a spare rotary breech from Chambers....the problem is that they do not have the small and the big O ring that goes with it..do you think that these seals are available in India...should I go ahead with the order without these O rings...

tirths · Post by **tirths** » Fri Dec 05, 2008 11:56 am

pkjeetesh";p="60723 wrote:dear Thirths....ive ordered for a spare rotary breech from Chambers....the problem is that they do not have the small and the big O ring that goes with it..do you think that these seals are available in India...should I go ahead with the order without these O rings...

Jeetesh, you never answered my previous question.

Well for big O ring buy this pat no. 9262K132 from http://www.mcmaster.com/

I will share the cost if you are buying them.

NOTE: During the disassemble process, this seal may cut and you got to replace it. But not the case for other seal.

The Gamo factory breech seal part number is: 33090.

I don't mind to share the cost too.

The specs are for the new model that are made after august 2007

Next time, please inform me if you are importing any parts from JM.

Regards,

Tirtha

pkjeetesh · Post by **pkjeetesh** » Fri Dec 05, 2008 12:33 pm

Hey Thirths...can you repeat the previous question... I dont remember...Ive just finished ordering for the large O ring...they sell in packs of 100s...will give you as many as you may require free of cost once I receive it....same holds good for the smaller seal...tell me how to source this one...my gut feeling is that we can take a chance with the local ones in this case...and yes I may have been lucky with the JM deal...yet if Im ordering something from him...I'll surely let you know...I was amazed at how prompt he was and the quality of packing was also good...

tirths · Post by **tirths** » Fri Dec 05, 2008 12:40 pm

pkjeetesh";p="60732 wrote:Hey Thirths...can you repeat the previous question... I dont remember...Ive just finished ordering for the large O ring...they sell in packs of 100s...will give you as many as you may require free of cost once I receive it....same holds good for the smaller seal...tell me how to source this one...my gut feeling is that we can take a chance with the local ones in this case...and yes I may have been lucky with the JM deal...yet if Im ordering something from him...I'll surely let you know...I was amazed at how prompt he was and the quality of packing was also good...

Thanks buddy for your offer!
I asked you about import cost of the spring.

Small seal--yes you can get it locally I do hope too. Moreover it is not an emergency as they are not wear out by accident but with time.

-Tirtha

pkjeetesh · Post by **pkjeetesh** » Fri Dec 05, 2008 1:09 pm

shipping and handling $14.00...no tracking facility since is <$80.00

pkjeetesh · Post by **pkjeetesh** » Fri Dec 05, 2008 1:10 pm

pkjeetesh";p="60740 wrote: shipping and handling $14.00...no tracking facility since is <$80.00

always remember to mention in special note to supplier----DO NOT MENTION AIRGUN/RIFLE SPARES ANYWHERE

striker · Post by **striker** » Fri Dec 05, 2008 2:55 pm

Jeetesh
once my relative imported a spring &seal from a uk online dealer and the declation is airgun spare but it reached safe

pkjeetesh · Post by **pkjeetesh** » Fri Dec 05, 2008 4:06 pm

Striker....the paint spray mechanism is also known as an airgun...with eggheads at the customs...why take a chance...

arun · Post by **arun** » Fri Dec 05, 2008 10:13 pm

Hi

Please do let me know if O rings small/big is available, as I would like to get the O rings replaced for my BSA RB2 same as gamo cfx.

Also would like the input on the piston seals and springs for the same.

Regards

Arun

pkjeetesh · Post by **pkjeetesh** » Fri Dec 05, 2008 11:25 pm

Tch..the guys at McMaster just sent me a mail telling me that they would not be in a position to accept the order due to the ever increasing complexity of US export regulationS and that they will accept orders from old/regular customers ONLY..whatever that means ...but at INR350...I think they are not interested...nevertheless Ive contacted a Chandigarh based company called FITCO for the O rings....I sent them the McMaster specifications...waiting for their reply....as for the springs and piston seals try this link Arun...Ive already ordered spares for my RWS54...

http://www.gunspares.co.uk/shopdisplayp ... ainsprings

sawbones · Post by **sawbones** » Sat Dec 06, 2008 11:42 am

Boys I restore all types of air rifles as a hobby

most of the ones that i come accross are not in production any more For OI rings I take the part and do a round of the various tractor and vehicle spares shops . They generally have a bottle full of O rings and you can generally find one that fits. the smaller sizes are found in the maruti carb kits and even finer ones in the welding torch spares shops.

Another suggestion is do not buy them in bulk as our indian heat can and will denature the rubber.

In the olden days we used to buy imported things that were tropiclised i.e. designed to tolerate our heat .

Indian rubber is far more durable thatn the european stuff as it has to withstand much larger variations of temparature

So hit the nearest shop and dont buy a large stock just remember which shop you got the particular oring from

Cheers

Sawbones

pkjeetesh · Post by **pkjeetesh** » Sat Dec 06, 2008 1:11 pm

Sawbones....im doing just that...and ive located the supplier....the Gamo seals must have a shore hardness of 70 and resistant to 121 degrees heat...dimensions are not a problem...

netby · Post by **netby** » Wed Jan 14, 2009 6:32 am

Hi guys

first of all,please excuse my English,it´s not my native language

I have two Gamos ( CFX 4.5 and Whisper X 5.5)and here in my country there is a store who have everything needed to repair Gamos air guns and assist Gamo´s owners

that small breach seals are l very easy to send by mail to any countryl
so,perhaps you could buy this things from them

the name of the shop is "Loja das Armas" ( the guns shop),and is located near Lisbon,Portugal
here is the link

http://www.lojadasarmas.com/pecas_gamo.htm

hope to help

salut

netby

PS- prices are in euros ( 1 euros equals almost 1 pound)

pkjeetesh · Post by **pkjeetesh** » Wed Jan 14, 2009 11:12 pm

Netby....thank you very much...but the website is not in English...do they have an option....

netby · Post by **netby** » Thu Jan 15, 2009 5:26 am

You are welcome Pkjeetesh

Yes the site is only in Portuguese,( they sell mostly to Portugal and Brasil) but I believe if they received some question about the products or an order in English ,they are able to answer that
although I can not assure you 100% about that,only way to be sure is to ask them

at least I can tell you that they are a reputed and serious company,anyone of have a Gamo air gun in this country use their services and buy their products,because they are the only national representative of the Spanish Gamo company ,here in Portugal

regards
Daniel

PS - rough translation ( thanks goggle) of their selling conditions

http://translate.google.com/translate?u ... t&ie=UTF-8

Indians For Guns

Indians For Guns

gamo breech seals

gamo breech seals

Re: gamo breech seals

Re: gamo breech seals

Re: gamo breech seals

Re: gamo breech seals

Re: gamo breech seals

Re: gamo breech seals

Re: gamo breech seals

Re: gamo breech seals

Re: gamo breech seals

Re: gamo breech seals

Re: gamo breech seals

Re: gamo breech seals