IHP "National" air rifles & pistols

All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
Post Reply
User avatar
tirths
Shooting true
Shooting true
Posts: 645
Joined: Wed Mar 12, 2008 2:43 pm
Location: Ashok Nahar, Chennai

Post by tirths » Fri Sep 26, 2008 10:14 am

Mo";p="53985 wrote:@Tirth: I thought you said heat sink. :D Yeah, I've used heat shrink. Its great to keep soldered batteries together etc. But methinks it'd tear with all the friction. Its not really strong being something similar to wrapping the guide with insulation tape. But it will definitely damp a lot of the vibrations.

Have you tried this?
It is indeed strong to take friction. But make sure to debur the spring. You can use hair dryer for the heat-shrink to fit on the spring guide and then screw the spring on it. Try this you will enjoy.

Yes. I have tried it before. It works like magic :)

For Advertising mail webmaster
TenX
Veteran
Veteran
Posts: 1902
Joined: Sun Sep 30, 2007 3:19 pm
Location: Bangalore, INDIA
Contact:

Post by TenX » Fri Sep 26, 2008 10:47 am

tirths";p="54011 wrote:
Mo";p="53985 wrote:@Tirth: I thought you said heat sink. :D Yeah, I've used heat shrink. Its great to keep soldered batteries together etc. But methinks it'd tear with all the friction. Its not really strong being something similar to wrapping the guide with insulation tape. But it will definitely damp a lot of the vibrations.

Have you tried this?
It is indeed strong to take friction. But make sure to debur the spring. You can use hair dryer for the heat-shrink to fit on the spring guide and then screw the spring on it. Try this you will enjoy.

Yes. I have tried it before. It works like magic :)
... Just a passing thought. I know of one insulation tape used for wires in bore-wells. The tape is climate-resistance and tolerates possible friction with rocky surfaces in bore-wells. This tape is basically used like an insulation tape, wound very tight, and then introduced to some heat. Once heated, the tape wraps blends with each other and becomes close to one outer lining...

... Will this help, considering ease of availability and cost?
Never Shave without a Blade
.......^___________________^
....../ '---_________________ ]
...../_==O;;;;;;;;_______.:/
.....),---.(_(____)/.....
....// (..) ),----/....
...//____//......
..//____//......
.//____//......
..-------

User avatar
mundaire
We post a lot
We post a lot
Posts: 5410
Joined: Mon May 22, 2006 5:53 pm
Location: New Delhi, India
Contact:

Post by mundaire » Fri Sep 26, 2008 10:57 am

tirths";p="53870 wrote: Delrin may not be the right option for spring guide unless it is solid. Brass could be an option. But better to keep the stock guide and use a "heat sink" to fit the spring.
My suggestion for using Delrin was based on a few online articles I'd read by airgun tuners overseas. I have never tried it so cannot comment on how effective it may be. However, if I am not mistaken Gamo uses Delrin or some similar material to make the spring guides on its airguns - so I'd imagine it cannot be too bad a material to work with.
TenX";p="54014 wrote: ... Just a passing thought. I know of one insulation tape used for wires in bore-wells. The tape is climate-resistance and tolerates possible friction with rocky surfaces in bore-wells. This tape is basically used like an insulation tape, wound very tight, and then introduced to some heat. Once heated, the tape wraps blends with each other and becomes close to one outer lining...

... Will this help, considering ease of availability and cost?
The material you refer to is nothing but plain 'ol rubber. IIRC the tube well chappies call it "kuccha rubbard" (raw rubber). I'd think it would be way too soft...

Cheers!
Abhijeet
Like & share IndiansForGuns Facebook Page
Follow IndiansForGuns on Twitter

FIGHT FOR YOUR RIGHTS - JOIN NAGRI NOW!

www.gunowners.in

"Political tags - such as royalist, communist, democrat, populist, fascist, liberal, conservative, and so forth - are never basic criteria. The human race divides politically into those who want people to be controlled and those who have no such desire." -- Robert Heinlein

User avatar
tirths
Shooting true
Shooting true
Posts: 645
Joined: Wed Mar 12, 2008 2:43 pm
Location: Ashok Nahar, Chennai

Post by tirths » Fri Sep 26, 2008 11:07 am

mundaire";p="54016 wrote:
tirths";p="53870 wrote: Delrin may not be the right option for spring guide unless it is solid. Brass could be an option. But better to keep the stock guide and use a "heat sink" to fit the spring.
My suggestion for using Delrin was based on a few online articles I'd read by airgun tuners overseas. I have never tried it so cannot comment on how effective it may be. However, if I am not mistaken Gamo uses Delrin or some similar material to make the spring guides on its airguns - so I'd imagine it cannot be too bad a material to work with.

TenX";p="54014 wrote: ... Just a passing thought. I know of one insulation tape used for wires in bore-wells. The tape is climate-resistance and tolerates possible friction with rocky surfaces in bore-wells. This tape is basically used like an insulation tape, wound very tight, and then introduced to some heat. Once heated, the tape wraps blends with each other and becomes close to one outer lining...

... Will this help, considering ease of availability and cost?
The material you refer to is nothing but plain 'ol rubber. IIRC the tube well chappies call it "kuccha rubbard" (raw rubber). I'd think it would be way too soft...

Cheers!
Abhijeet

Gamo's piston is different that IHP and therefore the Spring Guide. Delrin or Plastic can be used in Gamo but not in IHP or Diana.

TenX
Veteran
Veteran
Posts: 1902
Joined: Sun Sep 30, 2007 3:19 pm
Location: Bangalore, INDIA
Contact:

Post by TenX » Fri Sep 26, 2008 11:47 am

mundaire";p="54016 wrote: ...The material you refer to is nothing but plain 'ol rubber. IIRC the tube well chappies call it "kuccha rubbard" (raw rubber). I'd think it would be way too soft...
.. OK... Thanks :)
Never Shave without a Blade
.......^___________________^
....../ '---_________________ ]
...../_==O;;;;;;;;_______.:/
.....),---.(_(____)/.....
....// (..) ),----/....
...//____//......
..//____//......
.//____//......
..-------

Mo
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 436
Joined: Mon Jan 21, 2008 3:36 am
Location: Bangalore, India.

Post by Mo » Sat Sep 27, 2008 9:46 pm

;) Thats the idea..

Mo
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 436
Joined: Mon Jan 21, 2008 3:36 am
Location: Bangalore, India.

Post by Mo » Wed Oct 01, 2008 1:08 am

Hey Guys! I have some news!

Yesterday I was at Kovi Shop to have my gun lubed and much to everyones surprise: The National 35 comes with Teflon washers as default!!

The service person had no idea that this was the case either.

They promised to get some supplies from IFG soon. So if anybody's been planning to get Teflon washers for your old IHP, you know where to check now.

TenX
Veteran
Veteran
Posts: 1902
Joined: Sun Sep 30, 2007 3:19 pm
Location: Bangalore, INDIA
Contact:

Post by TenX » Wed Oct 01, 2008 1:22 am

I have a couple to spare, if someone needs it badly.. picked them up personally from the IHP factory at Ahmedabad... :)
I can also let them try the new washers I made from photo-copying machine rollers... :)
Never Shave without a Blade
.......^___________________^
....../ '---_________________ ]
...../_==O;;;;;;;;_______.:/
.....),---.(_(____)/.....
....// (..) ),----/....
...//____//......
..//____//......
.//____//......
..-------

Mo
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 436
Joined: Mon Jan 21, 2008 3:36 am
Location: Bangalore, India.

Post by Mo » Wed Oct 01, 2008 1:28 am

Photocopier rollers?? I have to see that one!

As for the washers, I'd take it if you're selling it. I'm stocking up on parts for the IHP. Dont know why, but I am!

Do lemme know bro.

TenX
Veteran
Veteran
Posts: 1902
Joined: Sun Sep 30, 2007 3:19 pm
Location: Bangalore, INDIA
Contact:

Post by TenX » Wed Oct 01, 2008 9:34 am

Dude.. I dont think I will dilute my stock for you to stock up :) :)
I offered it for someone who really needs it .. :)
Never Shave without a Blade
.......^___________________^
....../ '---_________________ ]
...../_==O;;;;;;;;_______.:/
.....),---.(_(____)/.....
....// (..) ),----/....
...//____//......
..//____//......
.//____//......
..-------

User avatar
tirths
Shooting true
Shooting true
Posts: 645
Joined: Wed Mar 12, 2008 2:43 pm
Location: Ashok Nahar, Chennai

Post by tirths » Wed Oct 01, 2008 2:46 pm

Mo";p="54640 wrote:Hey Guys! I have some news!

Yesterday I was at Kovi Shop to have my gun lubed and much to everyones surprise: The National 35 comes with Teflon washers as default!!.
Mo, how did you know it was teflon washer? Teflone washer is not easy to make. Moreover compression chamber of IHP is not at all up to the mark to take Teflone washer.

User avatar
tirths
Shooting true
Shooting true
Posts: 645
Joined: Wed Mar 12, 2008 2:43 pm
Location: Ashok Nahar, Chennai

Re: IHP "National" air rifles & pistols

Post by tirths » Wed Oct 01, 2008 3:20 pm

IHP 35 Technical Specs:
---------------------------
1. Compression Tube:

ID: 1.101

2. Piston:

ID: .857
OD: 1.083

3. Spring Guide

ID: .396

4. Main Spring:

NC: 42
WD: .121
ID: .582
OD: .794

User avatar
dev
Old Timer
Old Timer
Posts: 2614
Joined: Wed Jun 14, 2006 5:16 pm
Location: New Delhi

Post by dev » Wed Oct 01, 2008 4:42 pm

Why couldn't the guys who make the whole air rifle have the capacity to make a teflon washer?

Dev
To ride, to speak up, to shoot straight.

TenX
Veteran
Veteran
Posts: 1902
Joined: Sun Sep 30, 2007 3:19 pm
Location: Bangalore, INDIA
Contact:

Post by TenX » Wed Oct 01, 2008 4:48 pm

dev";p="54709 wrote: Why couldn't the guys who make the whole air rifle have the capacity to make a teflon washer?

Dev
Well said Dev.. Maybe someone sitting on one of the comfy chairs thinks that springs and piston are more important than washers :)
Never Shave without a Blade
.......^___________________^
....../ '---_________________ ]
...../_==O;;;;;;;;_______.:/
.....),---.(_(____)/.....
....// (..) ),----/....
...//____//......
..//____//......
.//____//......
..-------

Mo
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 436
Joined: Mon Jan 21, 2008 3:36 am
Location: Bangalore, India.

Post by Mo » Wed Oct 01, 2008 9:45 pm

@Tenx: I really need to stock up man! :-D Is that really need enough? I can use a couple more really's there! :-D

Mebbe the next time you go there, you can get me a couple eh? Thanks bro! :-)

@Tirth: Thanks for the data bro. The service guy at the armoury said its Teflon. He said he's changed with teflon washers for other customers and that its teflon itself. I had been to him to install the G-Smith leather washer, but he said not to do it..

Post Reply