A Sunday's evening at Pran's place.

Post by **kanwar76** » Mon Sep 22, 2008 4:33 pm

Nice outing.. thanks a lot Guys,

For next time we can set up some iron crows and have a go.. something like full course in 2 minute with airguns.. What say Rusty?

-Inder

TenX · Post by **TenX** » Mon Sep 22, 2008 4:35 pm

Mack The Knife Bana";p="53398 wrote: ...P.S.: NEVER ask this person for directions!

.. even to his own house ...

Post by **kanwar76** » Mon Sep 22, 2008 4:36 pm

ngrewal";p="53347 wrote: Milking cows penpusher some memories of by gone days..was never good at it have some bruises to show for LOL

best

Kee gal Navi 22jee,

No Majaan to milk in NYC

So when are you coming to INDIA again? \\

-Inder

PS: Atlast I will be in north on Holidays next month, can i pick up the claw then?

Post by **kanwar76** » Mon Sep 22, 2008 4:47 pm

Hi Rusty,

I was talking about this clay thrower. Amit has one and we used same at US, works pretty good and looks pretty simple to make. what you think.

-Inder

TenX · Post by **TenX** » Mon Sep 22, 2008 5:16 pm

Looks cute...

What is the cable for.. is it for some power source or to release the bird?

Post by **kanwar76** » Mon Sep 22, 2008 5:27 pm

TenX";p="53409 wrote:Looks cute...
What is the cable for.. is it for some power source or to release the bird?

To release the clays....

Pran · Post by **Pran** » Mon Sep 22, 2008 6:11 pm

NEVER ask this person for directions!

.. even to his own house ...

Stop crying, will mark it on Google maps

Pran · Post by **Pran** » Mon Sep 22, 2008 6:13 pm

kanwar76";p="53400 wrote: For next time we can set up some iron crows and have a go.. something like full course in 2 minute with airguns.. What say Rusty?

...and some remote controlled cars carrying empty beer cans.

HSharief · Post by **HSharief** » Mon Sep 22, 2008 6:22 pm

Looks like good fun guys. For the rimfire, may I suggest some reactive targets.

This one, you start shooting the four at the bottom and they sit up on the "shelf" and when the top one is shot, the shelf drops and they reset.

Be careful with the obstacle course as moving with a gun is very tricky and you have to turn up your safety meter quite a few notches. Instead, mix up the targets a bit, in distance and elevation and size and color. You can even add a "no shoot" target party obstructing a shooting target to add penalty points. Metal plate targets are easiest to setup and maintain. Best of luck and keep us posted.

TenX · Post by **TenX** » Mon Sep 22, 2008 6:26 pm

Pran";p="53417 wrote:
NEVER ask this person for directions!

.. even to his own house ...
Stop crying, will mark it on Google maps

... and supply everyone with Internet-ready laptops too:)

TenX · Post by **TenX** » Mon Sep 22, 2008 6:28 pm

HSharief";p="53420 wrote: Looks like good fun guys. For the rimfire, may I suggest some reactive targets.

This one, you start shooting the four at the bottom and they sit up on the "shelf" and when the top one is shot, the shelf drops and they reset.

Be careful with the obstacle course as moving with a gun is very tricky and you have to turn up your safety meter quite a few notches. Instead, mix up the targets a bit, in distance and elevation and size and color. You can even add a "no shoot" target party obstructing a shooting target to add penalty points. Metal plate targets are easiest to setup and maintain. Best of luck and keep us posted.

This is a very nice contraption... Do you own one?

Post by **Mack The Knife** » Mon Sep 22, 2008 8:52 pm

works pretty good and looks pretty simple to make. what you think.

Good! You make one in your dad's workshop when you go home next month.
BTW, remember to take the T1 holster...

Stop crying, will mark it on Google maps

Provided you know what to look for.

Be careful with the obstacle course as moving with a gun is very tricky and you have to turn up your safety meter quite a few notches.

You are right but I think I have got that covered. However, it's not idiot proof. Here's what I have in mind:
1) At the starting point, the bolt is to be closed on an empty chamber and only then can the magazine be inserted.
2) After each shot at each point, the bolt will not be opened. The bolt will only be cycled after reaching the next firing point.

Instead, mix up the targets a bit, in distance and elevation and size and color. You can even add a "no shoot" target party obstructing a shooting target to add penalty points. Metal plate targets are easiest to setup and maintain. Best of luck and keep us posted.

Those are good suggestions, will try and incorporate them.

Guys, how are you placed this Sunday? Would prefer doing it in the morning rather than in the evening. We will have one obstacle course of five shots each, followed by a few shots at a frisbee with the shotgun and then contibue doing something or the other with the airguns. I think I should be able to make it but cannot confirm until later.

Does anyone have a digital video camcorder to film the obstacle course?

TenX · Post by **TenX** » Mon Sep 22, 2008 9:00 pm

If I was free this sunday, I would be in the waters

Ranjeet Singh · Post by **Ranjeet Singh** » Mon Sep 22, 2008 9:08 pm

Hey Guys,

Where is this Pran's place. and is this by invitation only..or i can join the fun too

Cheers
Ranjeet

TenX · Post by **TenX** » Mon Sep 22, 2008 9:11 pm

Ranjeet Singh";p="53433 wrote: Hey Guys,

Where is this Pran's place. and is this by invitation only..or i can join the fun too

Cheers
Ranjeet

Its somewhere in whitefield.. nice place.. but please dont make the mistake of 'asking' Pran for directions.. you will end up in Mhow for the Big Bore competition

Indians For Guns

Indians For Guns

A Sunday's evening at Pran's place.

Re: A Sunday's evening at Pran's place.

Re: A Sunday's evening at Pran's place.

Re: A Sunday's evening at Pran's place.

Re: A Sunday's evening at Pran's place.

Re: A Sunday's evening at Pran's place.

Re: A Sunday's evening at Pran's place.

Re: A Sunday's evening at Pran's place.