my .22

All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
Post Reply
Grumpy
Old Timer
Old Timer
Posts: 2653
Joined: Sat Jun 03, 2006 12:43 am
Location: UK

Re: my .22

Post by Grumpy » Tue Nov 06, 2007 5:45 pm

`Polly`, `Ant Corrector`, `Rasta Bone`, `Mank`, `Ass`, `Armyjeep`, `Gimpy`, `Mundane` ( He`s in charge so gets done twice ! ) `Derv`, `GastricGandhi`, `Prat`.
I could keep going all day.
:wink:
Top
For Advertising mail webmaster
Sid_kapur30
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 376
Joined: Wed May 02, 2007 11:32 pm
Location: Delhi

Post by Sid_kapur30 » Tue Nov 06, 2007 7:12 pm

mundaire";p="30395 wrote:
Do join us at the range next time and hopefully we should be able to narrow down whether the gun's inaccuracy stems from mechanical shortcomings or just plain simple human error...

HTH
Cheers!
Abhijeet
i'll certainly be there but the question is when ????
eager to prove i aint that bad a shot(don't deny being lousy but not that bad to get all the shots wrong :P) and of course look forward to meet you guys in person

Cheers
Sid
Top
Mack The Knife
We post a lot
We post a lot
Posts: 5775
Joined: Mon May 22, 2006 6:23 pm

Post by Mack The Knife » Tue Nov 06, 2007 7:29 pm

OI! Make sure you use REMOVEABLE threadlock such as Loctite 243 and not just any old threadlock or the screws may have to be drilled out. Also, remember to degrease the threads before putting just a drop or two of removeable threadlock.

Personally, I'd rather you do not muck around with threadlocks at this point and just use the witness mark procedure I had mentioned in an earlier post.
Top
User avatar
Pran
Eminent IFG'an
Eminent IFG'an
Posts: 994
Joined: Sat Nov 25, 2006 2:06 pm
Location: Bengaluru, Karnataka

Re: my .22

Post by Pran » Tue Nov 06, 2007 9:03 pm

>Make sure you use REMOVEABLE threadlock such as Loctite 243

Anabond thread lock is another cheaper and more easily available alternative.

Pran
"A gun is a tool, Marian. No better, no worse than any other tool. An axe, a shovel, or anything. A gun is as good or as bad as the man using it."
Top
Sid_kapur30
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 376
Joined: Wed May 02, 2007 11:32 pm
Location: Delhi

Post by Sid_kapur30 » Tue Nov 06, 2007 10:12 pm

Mack The Knife Bana";p="30409 wrote: Personally, I'd rather you do not muck around with threadlocks at this point and just use the witness mark procedure I had mentioned in an earlier post.
I'll follow Mack The Knifes advice dont want to ruin the rifle or do anything smart with it :D

Thanks
Sid
Top
Grumpy
Old Timer
Old Timer
Posts: 2653
Joined: Sat Jun 03, 2006 12:43 am
Location: UK

Re: my .22

Post by Grumpy » Tue Nov 06, 2007 10:28 pm

Ah, stop messing around - weld the so-and-so up, that`ll stop it moving !
:wink: :lol:
Top
Sid_kapur30
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 376
Joined: Wed May 02, 2007 11:32 pm
Location: Delhi

Post by Sid_kapur30 » Tue Nov 06, 2007 11:15 pm

lol now thats one permanent solution aint it!
just fired around 100 odd sulgs wow i surely am going to have a hard time tomorrow :oops:
Top
Post Reply

Return to “Air Guns”