Availability of drilling of combination gun
-
- Learning the ropes
- Posts: 16
- Joined: Thu Nov 16, 2017 2:05 am
Availability of drilling of combination gun
I was wondering and considering to buy a drilling or combination gun . Is it availaible in India or does any gun shop has it ? Chambered in 12 gauge and 3006 most likely
- timmy
- Old Timer
- Posts: 3029
- Joined: Mon Dec 08, 2008 7:03 am
- Location: home on the range
Re: Availability of drilling of combination gun
Regarding a drilling, here are some comments about your desire/search, but I can't give you hard and fast information about availability or cost:
A drilling is more or less a custom gun, due to the fact that, not only must the two shotgun barrels be regulated to shoot to the same point at a given range, so also must the rifle barrel be regulated to the two shotgun barrels, because it has to use the same sighting planes.
One can get drillings nowadays, but they are very expensive custom guns. If you search through the posts of member Buckstix and examine his custom double barrel rifles, you will get an idea of what kind of work I'm speaking of here, and maybe a sense of the cost for a modern gun.
Remember that a drilling is heavier than a conventional SxS shotgun, as the extra rifled barrel is heavier than a single shotgun barrel due to the thickness of metal required by rifle pressures.
You want a 12 gauge x 12 gauge x 30-06, and this will most likely be a modern gun. Older drillings used rifle cartridges meant for drillings or often used cartridges, such as 7 x 72: bottlenecked cartridges require larger diameter barrels, which weigh more than those for a straight sided cartridge in the same caliber, and they are longer, which makes the action more bulky.
Good luck on your search and let us know if you find something suitable.
A drilling is more or less a custom gun, due to the fact that, not only must the two shotgun barrels be regulated to shoot to the same point at a given range, so also must the rifle barrel be regulated to the two shotgun barrels, because it has to use the same sighting planes.
One can get drillings nowadays, but they are very expensive custom guns. If you search through the posts of member Buckstix and examine his custom double barrel rifles, you will get an idea of what kind of work I'm speaking of here, and maybe a sense of the cost for a modern gun.
Remember that a drilling is heavier than a conventional SxS shotgun, as the extra rifled barrel is heavier than a single shotgun barrel due to the thickness of metal required by rifle pressures.
You want a 12 gauge x 12 gauge x 30-06, and this will most likely be a modern gun. Older drillings used rifle cartridges meant for drillings or often used cartridges, such as 7 x 72: bottlenecked cartridges require larger diameter barrels, which weigh more than those for a straight sided cartridge in the same caliber, and they are longer, which makes the action more bulky.
Good luck on your search and let us know if you find something suitable.
“Fanaticism consists of redoubling your efforts when you have forgotten your aim.”
saying in the British Royal Navy
saying in the British Royal Navy
- eljefe
- Old Timer
- Posts: 2876
- Joined: Sun Jun 04, 2006 3:37 am
Re: Availability of drilling of combination gun
Savage is one American maker which offers shotgun rifle combo. Over and under
Common calibers are .22/.410 which would not be legal for India due to .410
Other calibers I have read of are .22 mag/20 or 16 ga.
The drilling or ‘Dreiling’ were quality guns offered by European makers, notably from Ferlach.
My father owned a 9.3x74/16x16ga. Childhood memories only, but wood,metal,finish were drool worthy.
The 12/30-06 would be a dream gun for India. But you will have to get very lucky to unearth one there.
Common calibers are .22/.410 which would not be legal for India due to .410
Other calibers I have read of are .22 mag/20 or 16 ga.
The drilling or ‘Dreiling’ were quality guns offered by European makers, notably from Ferlach.
My father owned a 9.3x74/16x16ga. Childhood memories only, but wood,metal,finish were drool worthy.
The 12/30-06 would be a dream gun for India. But you will have to get very lucky to unearth one there.
''It dont mean a thing, if it aint got that zing!''
"...Oh but if I went 'round sayin' I was Emperor, just because some moistened bint lobbed a scimitar at me, they'd put me away..."
"...Oh but if I went 'round sayin' I was Emperor, just because some moistened bint lobbed a scimitar at me, they'd put me away..."
- Vikram
- We post a lot
- Posts: 5108
- Joined: Fri Jun 02, 2006 6:14 am
- Location: Tbilisi,Georgia
Re: Availability of drilling of combination gun
There must be one or two hiding somewhere as a lot were shipped out of India. Going to be very difficult and the price is what the seller wants.
It ain’t over ’til it’s over! "Rocky,Rocky,Rocky....."
-
- Learning the ropes
- Posts: 19
- Joined: Wed Nov 22, 2023 5:07 pm
Re: Availability of drilling of combination gun
Did you find anything so far?
- to_saptarshi
- One of Us (Nirvana)
- Posts: 408
- Joined: Wed May 24, 2006 1:07 pm
- Location: Maryland, United States
Re: Availability of drilling of combination gun
Yes , Saw one up for sale with a dealer in Kolkata but for 12 ga/405 combination , per my understanding .405 WCF availability in India pretty much non existent , so buyer will be using it as 12 bore DBBL only
Thanks and Regards,
Saptarshi
Saptarshi