aamar huricaine mod 16 air rifle vibrations

[sagar 12345]

dear friends, i had bought huricaine mod 16 air rifle from aarmar company in 0.177 cal. one year before. after firing around 3000 pellets i observed that there is no reducction in vibrations due to which it is not giving me desired accuracy. from begining rifle is vibrating sideways & diseling .i opened rifle cleaned it replaced piston seal with precihole seal apply precihole moly to piston seal, piston, & main spring spring guide.still it producing vibrations please experienced persons tell me solution to eliminate vibbrations in this air rifle.

[Basu]

I think there is large gap between spring and piston.
Sleeves may reduce the vibes to great extent.
You can make sleeves from 7up bottles too.
BTW what about cocking effort ?

Basu

[vsraja]

I think you are using loose fitting pellets.It may cause vibration.Check also breach seal.You can also cut some coils.

[sagar 12345]

basu sir , cocking effort of my huricaine is buttersmooth as like my genex very less my 12 year daughter can also cock it very easily. i will try piston sleve idea.

[Basu]

Hope this will work.....
You may use two sleeves if need be.
Anchor the sleeve with bottom by cutting & folding it then using one thrust washer.

Basu

[Rudransh]

Do two things and u will be amazed to see the difference.
1. Cut two coils of that monster main spring and smooth the endings.
2. Put a sleeve of any PTFE material or something like that the file cover in general which have a semi transparent cover hope u get what I referring.

After that u will find a new gun .
And let us know here the difference.

Regards
Veerbhadra