IOF 30-06 Rifle

[Vikram]

I was just looking for 30.06 rifle and after going through the iof 30.06 and some old .30 rifle i m confused in purchasing one. Not knowing much about the imported stuff m not able to choose between iof and imported one. Can anyone throw some light

I would say the IOF 30.06 is the best bang for your money. It is a copy of the German Sauer 202 rifle. From all the reports, it is quite accurate and reasonably well made. Some even use it in competitions. What is that point of spending big monies on an imported rifle when you can get a reasonably priced and well made rifle that can be worked upon? At least that is my thinking. Go through the older threads on this topic and you will get a lot of information.


Best-
Vikram

[russianshooter]

30-06 its not good caliber
your may use 7.62*54R or not?

Added in 4 minutes 29 seconds:
I have sauer 202 synthetics Good quality but only for hunting
If your may buy SVD (In Russia civil verson tigr - tiger) your not need this Sauer
My Sauer looks like this

Added in 4 minutes 33 seconds:


Added in 4 minutes 34 seconds:
and I have SVD (Tiger) 7.62*54R looks like this

[nagarifle]

when we take about which is good cal. please note the Indian context. 3006 is good here

[[email protected]]

What is price and cartridge capacity of 30-06 rifle

[nagarifle]

read all this on this page , after that ask questions

[Doctore]

Comrades!

What about spare magazines for 30.06. Some claim additional 5 rounds meaning 10 rounds at a time!
Anyone has given a shot at it.

Any leads!

[Yogeshpagedar]

Hi Friends,
Just wanted to share pics of my IOF 30.06 which i got done last year.

Regards.
Yogesh Pagedar.

[Chengy]

Very nice indeed. Where did you get it done and what were the damages. I also observe that you have mounted the scope on normal dovetail mounts. Is it holding zero after firing a couple of rounds.

[veeveeaar]

Mr Yogeshpagedar , very wellmade. where did you get this done aand how much time and money have you spent for this traansformation. ??. please guide us in detail

[Yogeshpagedar]

Very nice indeed. Where did you get it done and what were the damages. I also observe that you have mounted the scope on normal dovetail mounts. Is it holding zero after firing a couple of rounds.

Dear Chengy,

Thank you for liking the work done, coming to the scope and rail, I hope you have not missed on the single piece weaver type rail base mounted on the factory dove tail. with this rail and just 2 slots specifically made for the scope mounted on it hold it firmly and is firing superd on every repeat fire.

Regards,
Yogesh Pagedar.

Added in 1 minute 12 seconds:
you can notice them in the first 4 pics where the gun is without the scope.

Added in 9 minutes 39 seconds:
Mr Yogeshpagedar , very wellmade. where did you get this done aand how much time and money have you spent for this traansformation. ??. please guide us in detail

Hi Veeveeaar,

Thanks for liking the work done, this gun has been made in Pune by none other then one of our forum member Mr. z375, ( Zubin ) the entire metal worl along with sites, ceracoating etc is done by him and the wood work by Rajiv Bhosale. if you intend to get it done you may get in touch with z375.

Regards,
Yogesh Pagedar.

[Chengy]

Hi Yogesh,

Yeah, my mistake . Didn't examine the mount carefully. I had my 30.06 done here in Delhi but its nowhere near the workmanship on your gun

[sumbriavikramaditya]

Hi Friends,
Just wanted to share pics of my IOF 30.06 which i got done last year.

Regards.
Yogesh Pagedar.

Dear Yogesh,

This is the most beautiful IOF .30-06 rifle I have seen. It is very elegant. Gunstock is very well polished and looks of high quality. It seems that you have done some work on Bolt Handle, it seems to be more adapted to rigorous bolt action. The Checkering on the gunstock is also very well done. I really liked the job done with the Forend Tip, the ebony tip looks beautiful. I would love if you could upload some videos of this masterpiece and tell us more about it.

Regards

Vikramaditya Singh

[Yogeshpagedar]

Thanks Vikramaditya,

Will surely get some done and upload them in a day or two.

[sumbriavikramaditya]

Thanks Vikramaditya,

Will surely get some done and upload them in a day or two.

Dear Yogesh, I wanted to ask that the Weaver rail which you have attached to your rifle, does it come in standard size?

[Vikram]

Hi Friends,
Just wanted to share pics of my IOF 30.06 which i got done last year.

Regards.
Yogesh Pagedar.

Congratulations, Yogesh. Very nicely done. Zubin did a brilliant job.