Disassembling & Reassembling Precihole Air Rifle

[vsraja]

Dear GNV sir, i heard the other way round from a dealer, that a synthetic seal is suitable for highly polished or smooth compression chamber and a leather seal is best for an unfinished surface.but not sure.

[mooppan]

Dear GNV.
Thums-up for your photo illustrated tutorial . It will definitely guide those people who like DIY with their precihole. Can I ask you one thing..? Have you measured the springs specs..like total length. OD,ID ...etc?

[GNV]

Dear GNV sir, i heard the other way round from a dealer, that a synthetic seal is suitable for highly polished or smooth compression chamber and a leather seal is best for an unfinished surface.but not sure.

May be it is so. I told you I am no guru.

Added in 1 minute 40 seconds:

Dear GNV.
Thums-up for your photo illustrated tutorial . It will definitely guide those people who like DIY with their precihole. Can I ask you one thing..? Have you measured the springs specs..like total length. OD,ID ...etc?

Dear Mooppan,

I never did that. I don't have any precision calipers to do that.

[harsh_dadati]

Nice work

Sent from my Lenovo A6020a40 using Tapatalk

[GNV]

Thanks

[prashantjha19]

My dear GNV, I am astounded we have such people like you on IFG with such tenacious and selfless professionalism!
Salute your focus, covetedness and sheer sense of purpose in putting it all together....all at display in the trail you have shared on the forum.
But for people like you, no sport can take off in aspiring countries like ours...It's indeed a great service to the sport that so many people like you on IFG are to be credited with....very much like what the likes of Robert Beeman, and later the Tom Gaylords and Jim Tylers, etc. have done in the West.
Heartily appreciate and feel beholden to you all!
Thank you for the encouragement to people like me for being able to now go ahead with confidence servicing our ARs.
True regards,
Prashant

[GNV]

Thank You,
Prashantjha.

[prashantjha19]

Content irrelevant o the thread, and so taken off. Cheers

[GNV]

I had never used any AK brand guns so I can't offer any suggestions. But a lot of dealers have old stocks of 0.22 air guns. They may not show them in open but they are still selling them through back doors.

GNV

[Vishnu2017]

Really marvelous job sir, thanks for your posts , i learn lot of from your posts

[Vishnu2017]

Today am try to copy of GNV sir simple SPRING COMPRESSOR, finally it comes beyond my expectations, previously am try to decompress the spring with hand applying old rice bags , thanks GNV sir

[GNV]

Welcome

[sagar 12345]

i appriciate your skill,courage,curiocity,devotion towards air rifles & encouraging new members of this forum like me to do self maintianance of our air rifles at home .like you i am also living in small town of maharashtra . from you only we learn to disassembe & reassamble & tuning of air rifles. specially huricaine mod 16 airrifle i also own in 0.177 caliber . just bacause of your posts regarding this rifle i open it &lubricate with moly grase 60%thanks you sir. please make reviwe of artemis air rifle if possible.

[veeveeaar]

Mr.GNV, Words cannot describe your dedication. As a forum member you are the only person who has done such a practically informative and educative post. God bless you

[sagar 12345]

gnv sir you every article on disassembly of air rifles like sx 100 , huricaine air rifle are very informative specially along with pic. helps very much to new members like me to tune the rifles. please make same article on sdb artemis or sdb gennex air rifle please