AR-15; the progeny of genius.

ckkalyan · Post by **ckkalyan** » Mon Jul 28, 2014 1:48 am

Nice post Baljit thanks for sharing; now all you need is the barrel to complete your project!

sa_ali · Post by **sa_ali** » Mon Jul 28, 2014 1:09 pm

Aaahhh there is starts again, eagerly awaiting the further updates

Commonwealth_of_PA · Post by **Commonwealth_of_PA** » Mon Jul 28, 2014 5:22 pm

Good afternoon, Gentlemen,

Here is my beater AR - a BCM, pictured with my .50 caliber BMG magazine fed upper receiver.

Also pictured is the gem of my collection, please read the rollmark

P1010004eJPG.jpg

Commonwealth_of_PA · Post by **Commonwealth_of_PA** » Mon Jul 28, 2014 5:28 pm

Well, that was rather annoying. I tried to post two pictures and had a power failure when I went to preview. Lots internet but laptop has battery. I deleted one picture because I wanted to replace it, but from preview I could not upload the second picture. So my only option is to post, and then edit. But I can't edit because my post requires moderator approval

Here is the pic of my BCM beater AR with .50 caliber magazine fed upper receiver.

P1010011a.JPG

Post by **xl_target** » Mon Jul 28, 2014 8:32 pm

Wow Ed, an actual M16!
That trumps everything.
Very Cool, sir.

Commonwealth_of_PA · Post by **Commonwealth_of_PA** » Mon Jul 28, 2014 8:51 pm

It is cool but also means my gun budget is shot for the next 10 years

At Summer BBQ: What did you buy this year?

Me: The usual. Nothing

Baljit · Post by **Baljit** » Thu Jul 31, 2014 2:49 am

Hello Guy's,

Here is further updates for my AR project.

Yesterday, CK already picked up the barrel,low profile gas block and gas tube for me from my gunsmith and he is coming over tomorrow.Once he is here we will post pictures of the barrel,gas block and gas tube for all of you guys.
If everything going well maybe I am going to put test fire on this coming weekend on my AR.

Baljit

Post by **xl_target** » Thu Jul 31, 2014 3:14 am

It is cool but also means my gun budget is shot for the next 10 years

It can't be cheap to feed it either.

...maybe I am going to put test fire on this coming weekend on my AR

Looking forward to it, Baljit.

Baljit · Post by **Baljit** » Fri Aug 01, 2014 8:39 am

Hello Friends.

As I write in my last post,CK come over around 12:30 PM and he bring the barrel ,gas block and gas tube for me.Both of us work's on my AR and finally my AR is complete.

I like to share all the pictures with all of you so you guy's can see how I installed the barrel, gas tube, forend and flash hider.

Here is my half complete AR with barrel and forend.

CK looking all the parts.

On my working table.

I have to use upper vise block so I can work on my AR.

Before I installed the barrel I make sure I clean the barrel really good.

After I clean the barrel you guy's can see how shine the chember.

Here when I installed the barrel.

After I mount the barrel,I put barrel nut.

After I tight the barrel nut I have to use torque wrench to make sure I match the requirement for barrel nut.

As you guy's can see barrel nut in place.

After I tight nut with torque wrench, my next step is installed gas tube and gas block on the barrel.

After all of this my next step is installed the forend.

After I installed the forend my next step is installing the flash hider.

finally nose cone.

Here in this pictures I check head space.

After just over two long hours finally it's done.

CK with my new toy.

Guy's tomorrow we have a plan for the range so we can put test fire on my AR and also I am going to try CK's new toy as well.

Enjoy
Baljit

Post by **xl_target** » Fri Aug 01, 2014 9:22 am

[quoteGuy's tomorrow we have a plan for the range so we can put test fire on my AR and also I am going to try CK's new toy as well.[/quote]

Looking forward to it Baljit and CK. Post lots of photos.

TC · Post by TC » Fri Aug 01, 2014 12:46 pm

Baljit, that's a great job man. One hell of a rifle

Congrats

I fell in love with this grip ever since I handled a H&K PSG1 sniper rifle at an army facility.
When I saw the same on your new AR I was thrilled.

CK Da, you must be having a gala time. Will wait for the pics

TC

sa_ali · Post by **sa_ali** » Fri Aug 01, 2014 3:37 pm

ooooooooooohhhhhhhhhhhhhhhhhhh thats ssssssssssssssssseeeeeeeeexxxxxxxxxxxxxyyyyyyyyyyyyyyyyyyyy deadly Bro, it takes my breath away.

It looking so leathal which i am sure it is. Its amazing, lucky you CK, for holding it in hand.

brihacharan · Post by **brihacharan** » Fri Aug 01, 2014 5:27 pm

Hi Baljit,
> Awesome assembly Bro!
> Awaiting the range test reports eagerly....
> Have a 'blasting' week-end

> CKK - The "See What I Got" look says it all!!!!
Briha

Post by **xl_target** » Fri Aug 01, 2014 11:25 pm

Baljit,
Did you change your mind on the barrel? That profile looks different from the initial drawing that you posted.

Post by **Vikram** » Sat Aug 02, 2014 1:01 am

Baljit,

Excellent photo essay on the topic,Baljit. We learnt a few things here. Look forward to the range report. Are you getting Kalyan gorged on venison kababs,sausages and pickle?

Best-
Vikram

Indians For Guns

Indians For Guns

AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.

Re: AR-15; the progeny of genius.