Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
-
Rijo Joseph
- Almost at nirvana
- Posts: 111
- Joined: Wed Jan 13, 2010 10:52 am
- Location: Cochin, Kerala.
Post
by Rijo Joseph » Fri Sep 10, 2010 6:19 pm
Hi Friends,
Require your valuable inputs for modifying my UTA AK300 .22 which i brought almost 4 years back. I am planning to change my springs as it crossed more than 1000+ pellets and still accurate at 40- 50 mts and capable of taking crows etc. What is the best springs available for this model in India or abroad, any particular specification regarding length or gauge of spring etc and best washers available for this model, frankly i don't know the size of the washer used in this model. and if i have missed some thing really required my attention to increase performance is also welcomed
Please suggest.
Rijo Joseph
Sometimes if you want to get rid of the gun, you have to pick the gun up.
-
Rijo Joseph
- Almost at nirvana
- Posts: 111
- Joined: Wed Jan 13, 2010 10:52 am
- Location: Cochin, Kerala.
Post
by Rijo Joseph » Sat Sep 11, 2010 7:25 pm
No one is responding, help yara.....
Sometimes if you want to get rid of the gun, you have to pick the gun up.
-
Sakobav
- Old Timer
- Posts: 2973
- Joined: Wed May 31, 2006 7:28 pm
- Location: US
Post
by Sakobav » Sat Sep 11, 2010 7:30 pm
Some one will Rijo -- Good luck and conduct some research on this website for the info
-
kb100
- Almost at nirvana
- Posts: 131
- Joined: Fri Jun 04, 2010 3:23 pm
- Location: Bangalore
Post
by kb100 » Sat Sep 11, 2010 8:46 pm
Rijo Joseph wrote:Hi Friends,
Require your valuable inputs for modifying my UTA AK300 .22 which i brought almost 4 years back. I am planning to change my springs as it crossed more than 1000+ pellets and still accurate at 40- 50 mts and capable of taking crows etc. What is the best springs available for this model in India or abroad, any particular specification regarding length or gauge of spring etc and best washers available for this model, frankly i don't know the size of the washer used in this model. and if i have missed some thing really required my attention to increase performance is also welcomed
Please suggest.
Rijo Joseph
Difficult for anyone to comment without knowing the specs. In case someone who is familiar with the model and make doesn't come along, you might have to open her up and put up the measurements and snaps yourself for people to be able to suggest appropriate replacement parts.
A Closed Mouth Gathers No Feet!
-
Rijo Joseph
- Almost at nirvana
- Posts: 111
- Joined: Wed Jan 13, 2010 10:52 am
- Location: Cochin, Kerala.
Post
by Rijo Joseph » Mon Sep 13, 2010 4:35 pm
Hi,
I found the size of the spring it is 35mm barrel fit (in the cover of the spring it is mentioned as 35mm) and in washer size it was not mentioned...
rijo
Sometimes if you want to get rid of the gun, you have to pick the gun up.
-
kb100
- Almost at nirvana
- Posts: 131
- Joined: Fri Jun 04, 2010 3:23 pm
- Location: Bangalore
Post
by kb100 » Mon Sep 13, 2010 5:13 pm
Rijo,
Springs generally last waaay more than 1000 shots. If you have lost power the seal could be damaged - which can happen only of the chamber itself is scored or highly abrasive. I recommend get the gun opened up and only then will you know the condition and what you need to do.
A Closed Mouth Gathers No Feet!
-
girrish sharma
- Learning the ropes
- Posts: 38
- Joined: Thu Oct 21, 2010 4:23 pm
- Location: kolkata
Post
by girrish sharma » Fri Oct 22, 2010 10:12 pm
What is special in AK 300 model is it more powerful than any model 35. If so why a licence is not required under arms act ?
girrish
-
sibi james
- Fresh on the boat
- Posts: 9
- Joined: Wed Apr 20, 2011 2:03 pm
- Location: india kerala cochin thripunithura
Post
by sibi james » Tue Aug 28, 2012 4:30 pm
rijo i`m from cochin .even i have a 300 model air rifle
you check out in cochin air guns for good springs.
rijo hunting crows are illegal in india
-
Skyman
- Shooting true
- Posts: 975
- Joined: Fri Jan 27, 2012 1:29 pm
Post
by Skyman » Tue Aug 28, 2012 5:41 pm
Girish- no license required for air guns.It is legal to hunt rats and crows.They are classified as vermin.
I would rather hit my target gently than miss hard.
-
Ganesh TT
- One of Us (Nirvana)
- Posts: 422
- Joined: Sat Nov 06, 2010 4:56 pm
- Location: Chennai
Post
by Ganesh TT » Tue Aug 28, 2012 10:25 pm
Skyman wrote:Girish- no license required for air guns.It is legal to hunt rats and crows.They are classified as vermin.
Thanks
GANESH TT
-
sibi james
- Fresh on the boat
- Posts: 9
- Joined: Wed Apr 20, 2011 2:03 pm
- Location: india kerala cochin thripunithura
Post
by sibi james » Wed Feb 06, 2013 6:20 pm
will a foreign air rifle spring fit an indian air rifle ?what could be the cost for one of those?
-
roopeshkeloth
- Learning the ropes
- Posts: 33
- Joined: Sat Mar 17, 2012 11:47 am
- Location: Cochin
Post
by roopeshkeloth » Wed Feb 06, 2013 10:58 pm
Hai Rijo contact to thekkan armory in cochin. I change the spring of my ak 300 from there the spring is powerful and if we fit more powerful indian maid spring the vibration is more and that will effect accuracy.
-
Rijo Joseph
- Almost at nirvana
- Posts: 111
- Joined: Wed Jan 13, 2010 10:52 am
- Location: Cochin, Kerala.
Post
by Rijo Joseph » Fri Feb 08, 2013 6:17 pm
more power full indian maid spring!!!!...which brand...i heard they sell original diana springs...
Sometimes if you want to get rid of the gun, you have to pick the gun up.
-
sibi james
- Fresh on the boat
- Posts: 9
- Joined: Wed Apr 20, 2011 2:03 pm
- Location: india kerala cochin thripunithura
Post
by sibi james » Mon Feb 11, 2013 6:10 pm
diana cost more than rs 2000 which s of no use .it cannot fit indian air rifles nd it may break inside the chamber after some shots.it s made to work in long barrels.i changed my ak 300 spring from t jacob armoury i cost me around rs 250 for spring nd overall of rs 500 including new washer bush service etc
-
Rijo Joseph
- Almost at nirvana
- Posts: 111
- Joined: Wed Jan 13, 2010 10:52 am
- Location: Cochin, Kerala.
Post
by Rijo Joseph » Sat Feb 23, 2013 10:56 am
Diana's which model spring is getting broken inside the cylinder ? i know people using Diana 35 springs on AK's with out any probs !!!
Sometimes if you want to get rid of the gun, you have to pick the gun up.
