Imported pellets for IHP 35 .177
-
- One of Us (Nirvana)
- Posts: 474
- Joined: Sun Jun 28, 2009 12:59 pm
- Location: mumbai
Imported pellets for IHP 35 .177
One of my friend is coming back from US next week & I he is ready to bring some pellets for me
Which is the good imported pellets for IHP 35 .177 & cost must be around 5-6 dollars for 500 Pellets
Please suggest me any other spears that can I ask him to bring for my IHP
Which is the good imported pellets for IHP 35 .177 & cost must be around 5-6 dollars for 500 Pellets
Please suggest me any other spears that can I ask him to bring for my IHP
-
- One of Us (Nirvana)
- Posts: 344
- Joined: Wed Feb 17, 2010 11:34 pm
- Location: New Delhi
Re: Imported pellets for IHP 35 .177
Do not waste good pellets on a IHP.
If you insist on getting the pellets please give your friend custom declaration documents so that at customss they do not trouble him.
Also you can import them easily
If you insist on getting the pellets please give your friend custom declaration documents so that at customss they do not trouble him.
Also you can import them easily
-
- One of Us (Nirvana)
- Posts: 474
- Joined: Sun Jun 28, 2009 12:59 pm
- Location: mumbai
Re: Imported pellets for IHP 35 .177
Last week my friend brought 4 tins of RWS Diaboloo Basic177 Cal 7.0 Grains Wadcutter from pyramydair.com for me without any problem at Mumbai airport
http://www.pyramydair.com/s/p/RWS_Diabo ... _500ct/234
Due to rainy season I oiled & pack my gun to protect it from rusting but
Soon I will try it with my IHP & let you know the result
http://www.pyramydair.com/s/p/RWS_Diabo ... _500ct/234
Due to rainy season I oiled & pack my gun to protect it from rusting but
Soon I will try it with my IHP & let you know the result
You do not have the required permissions to view the files attached to this post.
- airgun_novice
- Veteran
- Posts: 1138
- Joined: Sun Sep 12, 2010 11:15 pm
- Location: Mumbai-Thane, India
Re: Imported pellets for IHP 35 .177
Dear Pratik, Methinks 7 grains might be a tad lighter for IHP 35. Anyway, try match grade pellets from RWS/ H&N specifically for rifles. Incidentally, my N25 responds OK and similar to Mastershot, gsmith Amateurs/ Competition/ P-10, Diana-/ Dyna- shot but when I put in RWS R-10 they simply "flew". So I would tend to agree with gverma. You also need to see if the pellets leave behind lead powder residue inside the barrel as that would make your shots go erratic after a while. Some of the pellets have feedback on the pyramid air site itself. Good luck.
-
- One of Us (Nirvana)
- Posts: 474
- Joined: Sun Jun 28, 2009 12:59 pm
- Location: mumbai
Re: Imported pellets for IHP 35 .177
Thanks for your suggestion airgun_novice
I read the review of the RWS Diabolo Basic .177 Cal, 7.0 Grains it is recommended for low to medium power air rifle & good for 10 M & up to 30 Yards it cost me around Rs.1500/- for 4 tins including courier charges from pyramydair to my friends location.Almost same if I buy master shot from Aimco Enterprise so I decided to give one try
My IHP gives me around 630 FPS with Diana Shot Pellets I don’t know the weight of it but it is smaller then Mastershot whose weight is 8.2 grains
Please see the Pic for all Pellets form left to right
1) RWS Diabolo Basic .177 Cal, 7.0 Grains
2) Mastershot Wads 8.2 grains
3) Diana Shot Flat head No. 1
The last two on right side I don’t know the make but they are imported & don’t fit in my IHP
I read the review of the RWS Diabolo Basic .177 Cal, 7.0 Grains it is recommended for low to medium power air rifle & good for 10 M & up to 30 Yards it cost me around Rs.1500/- for 4 tins including courier charges from pyramydair to my friends location.Almost same if I buy master shot from Aimco Enterprise so I decided to give one try
My IHP gives me around 630 FPS with Diana Shot Pellets I don’t know the weight of it but it is smaller then Mastershot whose weight is 8.2 grains
Please see the Pic for all Pellets form left to right
1) RWS Diabolo Basic .177 Cal, 7.0 Grains
2) Mastershot Wads 8.2 grains
3) Diana Shot Flat head No. 1
The last two on right side I don’t know the make but they are imported & don’t fit in my IHP
You do not have the required permissions to view the files attached to this post.
-
- One of Us (Nirvana)
- Posts: 474
- Joined: Sun Jun 28, 2009 12:59 pm
- Location: mumbai
Re: Imported pellets for IHP 35 .177
Just now I chrono my IHP 35 with RWS Diabolo Basic, Diana Shot & Master Shot
RWS Diabolo Basic -- 706,705,701,694,710 -------7.7 ft-lb
Diana Shot--------------637,641,625,634,648
Master Shot-------------625,621 ----------------------7 ft-lb
Regarding accuracy I will test it with in few days
RWS Diabolo Basic -- 706,705,701,694,710 -------7.7 ft-lb
Diana Shot--------------637,641,625,634,648
Master Shot-------------625,621 ----------------------7 ft-lb
Regarding accuracy I will test it with in few days