My SAMURAI 3G - 0.22cal

[ranjithpiraghavan]

dev...
Point noted.. The real fact of breaking sentance is the lack of prepardness. All of us may righting the reply immideatly after reading the blog, so there will be starvation of words,ideas. And in this condition you started thinking and writing and finally it will like same para. What i written....ha ha just bla..bla..bla..joking

With warm regards

Ranjith raghavan

[dr.jayakumar]

hi sir,
first we should thank you for sharing your 3G samurai air rifle.
in future,we can use your tech to improvise on any airgun.your write up was very simple and understandable.
where do you get this neoprene rubber washer?
you have done everything a professional can do to a rifle,except ''bluing''.
keep us posted on further improvisations.
regrads.

[airgun_novice]

That is a great job done by you Briha Sir. Congratulations for your new Samurai. Wish to shoot with it once..

With ONE WORD - OVERWHELMED !

[essdee1972]

Can't wait to try it out!!

Cheers and Happy Shooting!

EssDee

[brihacharan]

hi sir,
first we should thank you for sharing your 3G samurai air rifle.
in future,we can use your tech to improvise on any airgun.your write up was very simple and understandable.
where do you get this neoprene rubber washer?
you have done everything a professional can do to a rifle,except ''bluing''.
keep us posted on further improvisations.
regrads.

Hi Doc,
> Tks for ur words of appreciation!
> Yes, you caught me there! The Blueing...........
> Just waiting for the week-end to do it - Got a bottle of "Ballistol - Klevner" blueing solution and tested it on a steel rod, looks great.
> Will post picture when done.
Cheers
Briha

[Rijo Joseph]

Sir, Really appreciate the time, effort and knowledge you have put in to create a master piece like this, Samurai 3G is just awesome.

BR
Rijo Joseph

[dr.jayakumar]

hi sir,
first we should thank you for sharing your 3G samurai air rifle.
in future,we can use your tech to improvise on any airgun.your write up was very simple and understandable.
where do you get this neoprene rubber washer?
you have done everything a professional can do to a rifle,except ''bluing''.
keep us posted on further improvisations.
regrads.

Hi Doc,
> Tks for ur words of appreciation!
> Yes, you caught me there! The Blueing...........
> Just waiting for the week-end to do it - Got a bottle of "Ballistol - Klevner" blueing solution and tested it on a steel rod, looks great.
> Will post picture when done.
Cheers
Briha

dear sir,
cold bluing does not stay long.try rust bluing its the best way and gives a beautiful finish..http://www.google.co.in/url?sa=t&rct=j& ... 8A&cad=rja.
i had tried this and successfully blued my pistol.
regards

[pkjeetesh]

Great job Briha....i particularly liked the front sight....you can replace the stock hex screws with socket head types and the piston thrust bearings could do with some buttoning......good job once again....

regards

p k jeetesh

[brihacharan]

dear sir,
cold bluing does not stay long.try rust bluing its the best way and gives a beautiful finish..http://www.google.co.in/url?sa=t&rct=j& ... 8A&cad=rja.
i had tried this and successfully blued my pistol.
regards[/quote]

Hi Doc,
> Tks for the link...
> Will definite try out.
Rgds
Briha

[brihacharan]

Great job Briha....i particularly liked the front sight....you can replace the stock hex screws with socket head types and the piston thrust bearings could do with some buttoning......good job once again....
regards
p k jeetesh

Hi pkj,
> Thanks for the appreciation
> Hex screws & buttoning is a great idea....
Rgds
Briha

[SUFFIX]

Briha,
You made me seat again on DIY bug!
By looking on the target, I would say, not only you have made your airgun beautiful but deadly accurate also.

Great job!

-SUFFIX

[Basu]

Hi Briha,
Kodos to you for the excellent transformation you have done for your gun.
In all true sense, it has lost its last identity and now only SAMURAI 3G.
I am little curious to know that how could you reduce the vibration at
such given FPS to get nice groupings.

Basu

[brihacharan]

Hi Briha,
Kodos to you for the excellent transformation you have done for your gun.
In all true sense, it has lost its last identity and now only SAMURAI 3G.
I am little curious to know that how could you reduce the vibration at
such given FPS to get nice groupings.

Basu

Hi Basu,
> Frankly I think I have been lucky...
> Most components like the ID of the receiver, polishing of the piston, exact fitment of seal, good quality spring / rear guide / top hat, smoothening of the sears, neoprene breech seal and an excellent custom made lube - all these have contributed to the reduction of vibration in my Samurai 3G.
> At the cost of sounding a little presumptious "I put in a lot of hard work" - personally sitting with the machinists, carpenter and also sourcing materials all over the city.
> Doing a 5 day consultancy - I had to literally snatch time to pursue this passion - but it paid off!
Cheers
Briha

[brihacharan]

Briha,
You made me seat again on DIY bug!
By looking on the target, I would say, not only you have made your airgun beautiful but deadly accurate also.
Great job!
SUFFIX

Hi Suffix,
> Thanks man for your appreciation.
> I must admit that the gun has a good balance when shouldered which helps tremendously while aiming - analyzing this I feel that extending the stock & adding on the muzzle brake has contributed to this.
> Another aspect I have realized is that using Round Heads or Wadcutters or Pointed Heads (all in 14gr) the point of impact at 30ft has not varied much!
> You can see this from the pics of the targets (one with round heads & the other with wadcutters)
> Incidentally I have put 4 pellets (pointed) in a 5mm dia hole on a Deo Can! Unfortunately I threw away the can - should have atleast photographed it.. maybe next time I'll do it.
Cheers
Briha

[gpgs19]

Brihacharan ji!Look like job well done.Each indian made breakbarrel gun should have an extended forestock.I think only ak-agni comes with one.And let us all your students know if you find any DIY two stage trigger mechanism.

Cheers
Vinay