IHP "National" air rifles & pistols

[SUFFIX]

Great professionalism shown by IHP!

Hi A_N using powertool cutter would be the best option to cut coil. Gas cutting is not recommended as this will impact the tempering.

Good Luck!

[airgun_novice]

Hi Ebenezer sad to hear that!
Why don't you try IZH 53 spring. Both gun looks to be equal in size.

-Suffix

Suffix, not that I am an expert on AP/ AR internals, but I feel better way to check out compatibility would be comparing Internal/ Outer Diameter, Length and Number of Coils of the springs of both the pistols. I found this spring that you mentioned on Target Tune site - *NO* info on compatibility with IHP .22 AP. So why take needless risk on wasting extra 1000 bucks ?

http://target-tune.in/international/pro ... oster.html

[marthandan]

ebenezer,
cutting the spring and flattening the end accurately is a simple process. let me know what length you want to remove and i will direct you to the right machine shop.

[ebenezer]

Hi Marthandan,

I need to cut just three to four coils in the existing spring. May I know where you are put up?

Ebenezer

[marthandan]

besant nagar...i was bitten by the DIY bug a long time ago ...so just happen to know things that i need?

-- Wed Feb 23, 2011 9:02 pm --

if its ok with you...we could do the modifications this weekend

[ebenezer]

Hi Marthandan,

You have a PM.

Ebenezer

[snIPer]

Ebenezer,
you can cut the spring yourself, all you need is a jewelers file (not the very small one but a little larger).
/S/

[ebenezer]

Thanks for the tip Sniper. Will try it.

Regards,
Ebenezer

[englishtown]

hello guys

i have just got an IHP National air rifle. I want to mount a scope on it. plz guide me which scope wud best fit. and anyone selling mount scope.
i'm interested to buy.

[email protected]

-- Wed Mar 02, 2011 10:49 am --

i hv got an IHP Natinal Air Rifle 25 .177 single shot break barrel. i want to buy a scope for it.

plz guide me which scope sud i buy and from where ??? any one selling scope on IFG i'm interested to buy.

location

Maler kotla
Punjab.

[mayank]

Hello everyone,

A very nice forum. Very active also.

I purchased an IHP air gun today. Having read a lot of threads on the forum here, I chose the national 25 .177 model and further chose to get it from 'Aimpoint' in pune.

No wonder I was excited to reach home and give it a try. I tried from 5mtr range to approx 8mtrs and sadly could not get the desired results.

1. I am not sure if I got the rear sight settings correct. Can anyone tell me the theory behind the 3 levers here?
2. I shot in groups of 4 and 5. While all the shots were close to each other (max distance between any 2 holes in a group being approx 1 inch, from both 5m and 8m distance), however, the shots were about 2-4 inches below where I aimed. I think the problem is with my open sight but I am not sure. I am very eagerly looking forward to suggestions here.

-Mayank.

[rups]

Hi friends,
I want to buy New/Used ( in good condition ) IHP National CO2 Match Air Pistol (.177). I can spend upto 20k depending upon the condition.
If any one want to sell please contact me: [email protected] or 09735245870 or PM me.
Regards,
rups

[ECHOFIGHTER]

Katana,
An awesome job, i must say. The scopes that have been fitted- are they delivered at your doorstep? i dont have any experience at all with ebay. The rifles are looking excellent. Thank you Sir for excellent detailed info.

[englishtown]

Last month i bought an ihp 25 national air gun , springer. .177

i hv shot about 500 pellets and after that it is giving sm trouble.
when i try to cock it and bring down the barrel. it doesn't stop , it comes back and after 3-4 tries it stops the trigger.
sm times it shoots the pellet before i even take aim. without even touching the trigger.

sud i take it back to the gun dealer where i bought it????

i don't undstand.

[Katana]

echofighter,

Just a time pass project, what I call a 'productive spare time activity' Basically I did not like the looks of the factory rifles, so I decided to do something about it. I had the scopes with me for quite some time. The rails were sourced from member mdhasan. The rest of it was done by me and a friend. Doing up springers is no problem. Just an understanding of the dynamics of the weapon. Am doing an AirMaster currently.

englishtown,

Seems you got a problem with the chisel stop. Have it checked out.

[englishtown]

hi fellaws

i just got a new air gun ihp national mod 25. i hv bought a scope also but doesn't know any gun smith in my area.

cn sm one help me find a good gun smith near Ludhiana or Patiala, (Punjab)