Need specs and import details about Benjamin Discovery

All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
Post Reply
User avatar
don
Learning the ropes
Learning the ropes
Posts: 47
Joined: Thu Aug 26, 2010 2:28 pm
Location: Hyderabad

Need specs and import details about Benjamin Discovery

Post by don » Tue Aug 31, 2010 2:08 pm

Dear Friends,
I have seen the details and specifications of Benjamin Discovery in
http://www.pyramydair.com/p/benjamin-di ... ifle.shtml

Is 0.177 model of this gun will come under airgun category? (cause it is PCP)
if yes, can it imported through courier?
If the answer is yes for the above two questions, in the specifications it works with both PCP and CO2, here ignore co2, for filling the air in to the gun, the specified air pump which is given in the site is necessary or can we fill the air with our car air pump or cycle air pump?
http://www.pyramydair.com/s/a/Benjamin_ ... ifles/2222

I am asking this information for extra cost reduction, cause that pump costs $179.
Along the gun can i order a scope rails and a scope too?( need information in terms of customs)
in a single consignment can i order more than one gun? like one Benjamin Discovery, one air pistol, one airsoft revolver

:cheers:
Don
Don ko pakadna mushkil nahi, na munkin hai

For Advertising mail webmaster
pratik_mahale
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 474
Joined: Sun Jun 28, 2009 12:59 pm
Location: mumbai

Re: Need specs and import details about Benjamin Discovery

Post by pratik_mahale » Tue Aug 31, 2010 2:42 pm

If you are rifle club member then only you can import any air rifle but only .177 cal
The Air pressure required for car is around 32 PSI & air pressure required for PCP air gun is 2000 to 3000 PSI

Benjamin Discovery with Pump for $369 is the best value for money gun
Courier charges by FedEx will be around 130 to 150 $
Don’t order scope & pellets along with the gun
You can order only one gun at a time

& please go thought the topic “Airgun import experiences - via post/ courier route”
You will get answers to all your questions

User avatar
don
Learning the ropes
Learning the ropes
Posts: 47
Joined: Thu Aug 26, 2010 2:28 pm
Location: Hyderabad

Re: Need specs and import details about Benjamin Discovery

Post by don » Tue Aug 31, 2010 2:55 pm

Thanks pratik_mahale

:cheers:
Don
Last edited by don on Tue Aug 31, 2010 3:45 pm, edited 1 time in total.
Don ko pakadna mushkil nahi, na munkin hai

User avatar
kanwar76
Eminent IFG'an
Eminent IFG'an
Posts: 1861
Joined: Tue Jun 06, 2006 7:00 pm
Location: Bang-a-lure
Contact:

Re: Need specs and import details about Benjamin Discovery

Post by kanwar76 » Tue Aug 31, 2010 3:37 pm

Don one question, why you keep putting ROTFL this in every post of yours? :roll:
I am the Saint the Soldier that walks in Peace. I am the Humble dust of your feet, But dont think my Spirituality makes me weak. The Heavens will roar if my Kirpan were to speak...

User avatar
don
Learning the ropes
Learning the ropes
Posts: 47
Joined: Thu Aug 26, 2010 2:28 pm
Location: Hyderabad

Re: Need specs and import details about Benjamin Discovery

Post by don » Tue Aug 31, 2010 3:43 pm

Hi Kanwar76,
Usually I keep :cheers: in all of my posts at the end instead of writing "regards" or "cheers" etc, and I think that symbol also gives the same meaning, any wrong in it? is it against the website rule?
may be in the above post i pressed ROTFL instead of :cheers: , that may be done wrong and I am editing it

:cheers:
Don
Don ko pakadna mushkil nahi, na munkin hai

User avatar
kanwar76
Eminent IFG'an
Eminent IFG'an
Posts: 1861
Joined: Tue Jun 06, 2006 7:00 pm
Location: Bang-a-lure
Contact:

Re: Need specs and import details about Benjamin Discovery

Post by kanwar76 » Tue Aug 31, 2010 3:52 pm

No man nothing wrong, keep doing it. I was just curious.

-Inder
I am the Saint the Soldier that walks in Peace. I am the Humble dust of your feet, But dont think my Spirituality makes me weak. The Heavens will roar if my Kirpan were to speak...

Post Reply