Something ought to go wrong

Sid_kapur30 · Post by **Sid_kapur30** » Mon Jan 14, 2008 1:11 pm

Finally got a scope and a scolding (they just wont try to understand). Thanks a lot Nagarifle for a sweet looking scope that is just what i was looking for and reducing the price to 3k

.
Though the scope rail is a little off so i had to the turn windage to max. to make it shoot some what straight but in vain. So if you all look closely there are some folded up pieces of targets between the mounts and the scope. Could zero it after 2 hrs. of hard work and right when i got the perfect shot the scope came of, my mistake as i left the screws a little loose so (trying to avoid the opening it again). Will work on the rail to see if it can be corrected or will head back to Garg amoury and request him to change the peice. have a look and yes i know it looks beautiful, now the only thing left is to make it shoot like one

Here are a few pics

http://i266.photobucket.com/albums/ii26 ... C00126.jpg

http://i266.photobucket.com/albums/ii26 ... C00125.jpg

http://i266.photobucket.com/albums/ii26 ... C00123.jpg

http://i266.photobucket.com/albums/ii26 ... C00120.jpg

Cheers
Sid

Sid_kapur30 · Post by **Sid_kapur30** » Mon Jan 14, 2008 1:15 pm

The sirifort meet writeup shall follow soon

Post by **eljefe** » Mon Jan 14, 2008 1:18 pm

Congrats Sid on taking the first step.
before you head to the dealer, why dont you ask Dev for some advice? he has fitted scopes on air rifles and may know a couple of hints and kinks.
As for the slots not being machined true, good chance too.
Best
Axx

YouTube · Post by **mundaire** » Mon Jan 14, 2008 1:25 pm

Sid, sorry for not being able to make it yesterday buddy - but was in a bit of a family tangle and couldn't even make/ receive calls till very late in the evening... Hope you guys had a blast!

Cheers!
Abhijeet

Sid_kapur30 · Post by **Sid_kapur30** » Mon Jan 14, 2008 1:41 pm

Axx the rail is mounted a little off the center. The holes have been drilled wrong so i wonder if something could be done to rectify it. Plus if i open it and punch few more holes i'll probably have something similar to delhi roads on my Airrifle; doesn't sound to good does it

And no sweat b'day boy (uncle sounds better but let's leave that one out for now) there are many more weekend s to follow

hope to see you on this sunday

Cheers
Sid

kanwal · Post by **kanwal** » Mon Jan 14, 2008 2:55 pm

Hey Sid,

Sorry about so many issues with your rifle, as Olly said check if Garg can take it back...well the scope was good.

Here are some pics of us at Sri fort 13/01/2008 and my results of the day.

http://profile.imageshack.us/user/kanwa ... ockxd0.jpg

Olly was great, helped me with vital tips.....thanks boss !!!

-Kanwal

Olly · Post by **Olly** » Mon Jan 14, 2008 3:08 pm

it was a pleasure to meet more 'Darlings of Delhi'... such an enthusiastic bunch with a good hand for shooting..... i admit...

Guys, do buy your guns quickly and lets freak out...

Sid,
Yes, if you can get a swap to IHP .22, it'll be very ideal... do try speaking to our friend at Garg... With the pains you are taking to zero in the gun, your determination needs no speculation...

Sid_kapur30 · Post by **Sid_kapur30** » Mon Jan 14, 2008 6:55 pm

Well it hurts when some one calls your baby ugly and so doest it hurt when every one says your rifle aint good. Did every thing to get this thing working, spent an hour in office also but this bug*3r just wont shoot straight

, conclusion: this baby is ugly. will probably show it to the Pro's at IFG and then will speak to our dear at Garg armoury. Wish me luck

Cheers
Sid

hellfire_m16 · Post by **hellfire_m16** » Mon Jan 14, 2008 7:07 pm

Best of Luck Sid

YouTube · Post by **mundaire** » Mon Jan 14, 2008 8:51 pm

Sid_kapur30";p="35314 wrote:Axx the rail is mounted a little off the centre. The holes have been drilled wrong so i wonder if something could be done to rectify it. Plus if i open it and punch few more holes I'll probably have something similar to Delhi roads on my Airrifle; doesn't sound to good does it

It's a manufacturing defect, and you'd be well within your rights to have it replaced with a piece that does not have this problem OR have it rectified at the sellers expense. I would suggest YOU not mess with it till you have taken it back to the seller, you may needlessly void your warranty! Besides this is not something that you can rectify on your own OR should have to rectify on your own...

Cheers!
Abhijeet

Sid_kapur30 · Post by **Sid_kapur30** » Tue Jan 15, 2008 10:24 am

By opening and punching holes i meant at a smiths place, i don't even have the tools nor the experience sire, wont ever do that till i learn how to do it

. will try and speak with the concerned person today, lets see how it goes.

Cheers
Sid

kanwal · Post by **kanwal** » Tue Jan 15, 2008 11:42 am

Good luck dude -- catch u next week at same place @@

YouTube · Post by **mundaire** » Tue Jan 15, 2008 12:22 pm

kanwal";p="35317 wrote:Here are some pics of us at Sri fort 13/01/2008 and my results of the day.

http://profile.imageshack.us/user/kanwa ... ockxd0.jpg

Good shooting Kanwal!

Sid_kapur30";p="35314 wrote:And no sweat b'day boy (uncle sounds better but let's leave that one out for now) there are many more weekend s to follow hope to see you on this sunday

Sure thing babalog

Will look forward to it...

Cheers!
Abhijeet

Olly · Post by **Olly** » Tue Jan 15, 2008 2:52 pm

Guys, don't forget to request the BIG GUN to bring the TX200 !!

Post by **Vikram** » Tue Jan 15, 2008 5:54 pm

Congrats,Sid.Here to good shooting.

Best-
Vikram

Indians For Guns

Indians For Guns

Something ought to go wrong

Something ought to go wrong

Re: Something ought to go wrong