Page 1 of 1
New Benchrest Rifle Design.
Posted: Fri Dec 20, 2024 12:52 pm
by guru050
Hi All,
Please share your suggestion on this new design. Any feedback from you will helpful for me.
For Bench rest Shooting and Plinking.
Caliber - .177
Max Pressure - 3600 PSI
Power - 15 ft-lb
Action Mechanism - Side lever.
Barrel - 10/12 Groove Right Hand Twist
Trigger - Two Stage adjustable, both 1st stage and second stage and length of full.
Safety - Push Safety.
Regulated - Inline Regulator and hammer spring adjustable.
Butt - Height and Length Adjustable.
Thank you.
Re: New Benchrest Rifle Design.
Posted: Mon Dec 23, 2024 9:24 am
by Bishop
Hi Guru,nice design.
I have following suggestions,
1)If it's feasible make the barrel threaded into the reciever along with locking nut instead of grub screws holding the barrel.
2)Modular enough to put big 500cc or 700cc bottle or ability to shoot from external regulated bottle.
3)Integrated Monopod for rear butt(not sure if i'm using right terms).
4)If you are ought to use grub screws for holding the barrel,then make the reciever bit longer and also add a barrel band.
Re: New Benchrest Rifle Design.
Posted: Thu Jan 09, 2025 9:35 pm
by king220477
hi Guru ji,
i am new to airgun stuffs, just searching about these for last 8-10 days
so i have very very little ideas
i want to protect my farm
and also to protect from mobs attack home for loots
actually my father want it
but airguns available in market have very less power
it will be extremely helpful if you
help me with your custom build airgun
I'm from West Bengal
Re: New Benchrest Rifle Design.
Posted: Fri Jan 10, 2025 11:13 am
by Mr.Shome
king220477 wrote: ↑Thu Jan 09, 2025 9:35 pm
hi Guru ji,
i am new to airgun stuffs, just searching about these for last 8-10 days
so i have very very little ideas
i want to protect my farm
and also to protect from mobs attack home for loots
actually my father want it
but airguns available in market have very less power
it will be extremely helpful if you
help me with your custom build airgun
I'm from West Bengal
Hello,
I empathise with your concern to protect your property but airguns abiding by the laws of our country will hardly serve your purpose. Using a more powerful airgun is illegal.
Also, unfortunately most of the people in influential executive and legislative positions will simply use such an incident to further destroy of whatever little remains of our pathetic laws on firearms and airguns.
So, it would be much better to apply for a firearms license under crop protection category or self defense.
In the meanwhile, you can search for other good alternatives to protect your farm. For instance, hiring an armed security guard.
Re: New Benchrest Rifle Design.
Posted: Fri Jan 10, 2025 1:09 pm
by king220477
Mr.Shome wrote: ↑Fri Jan 10, 2025 11:13 am
king220477 wrote: ↑Thu Jan 09, 2025 9:35 pm
hi Guru ji,
i am new to airgun stuffs, just searching about these for last 8-10 days
so i have very very little ideas
i want to protect my farm
and also to protect from mobs attack home for loots
actually my father want it
but airguns available in market have very less power
it will be extremely helpful if you
help me with your custom build airgun
I'm from West Bengal
Hello,
I empathise with your concern to protect your property but airguns abiding by the laws of our country will hardly serve your purpose. Using a more powerful airgun is illegal.
Also, unfortunately most of the people in influential executive and legislative positions will simply use such an incident to further destroy of whatever little remains of our pathetic laws on firearms and airguns.
So, it would be much better to apply for a firearms license under crop protection category or self defense.
In the meanwhile, you can search for other good alternatives to protect your farm. For instance, hiring an armed security guard.
This was legal just before 2016
even .22 also was legal
and its near impossible to get firearms license
and security guard will run first incase of mob attack
we have to save our back
those are very lucky who get good airgun before 2016
Re: New Benchrest Rifle Design.
Posted: Fri Jan 10, 2025 8:24 pm
by guru050
Bishop wrote: ↑Mon Dec 23, 2024 9:24 am
Hi Guru,nice design.
I have following suggestions,
1)If it's feasible make the barrel threaded into the reciever along with locking nut instead of grub screws holding the barrel.
2)Modular enough to put big 500cc or 700cc bottle or ability to shoot from external regulated bottle.
3)Integrated Monopod for rear butt(not sure if i'm using right terms).
4)If you are ought to use grub screws for holding the barrel,then make the reciever bit longer and also add a barrel band.
Hi,
Thank you for suggestions.
1. I am using barrel band to support the barrel.
2. i am fitting quick fill connector to connect external bottles whole shooting.
3. regarding monopod, i will plan to attach it to butt.
once again thank you for your valuable suggestion.
Re: New Benchrest Rifle Design.
Posted: Fri Jan 10, 2025 8:33 pm
by guru050
king220477 wrote: ↑Thu Jan 09, 2025 9:35 pm
hi Guru ji,
i am new to airgun stuffs, just searching about these for last 8-10 days
so i have very very little ideas
i want to protect my farm
and also to protect from mobs attack home for loots
actually my father want it
but airguns available in market have very less power
it will be extremely helpful if you
help me with your custom build airgun
I'm from West Bengal
Hi,
I can understand your problem but i cant help you because of the restrictions. My rifles are under 15 ft-lb energy.
Thank you,
Re: New Benchrest Rifle Design.
Posted: Sat Jan 11, 2025 12:19 am
by king220477
guru050 wrote: ↑Fri Jan 10, 2025 8:33 pm
king220477 wrote: ↑Thu Jan 09, 2025 9:35 pm
hi Guru ji,
i am new to airgun stuffs, just searching about these for last 8-10 days
so i have very very little ideas
i want to protect my farm
and also to protect from mobs attack home for loots
actually my father want it
but airguns available in market have very less power
it will be extremely helpful if you
help me with your custom build airgun
I'm from West Bengal
Hi,
I can understand your problem but i cant help you because of the restrictions. My rifles are under 15 ft-lb energy.
Thank you,
Thanks for understanding my problem.
i guess online platform has major trust issue
which is good, but...
i thought a lot for 1-2 days
and find a way to apply for license
there is 70-80% chances of approved
i may try next year
anyways, thanks again for creating the masterpiece