Indians For Guns

Posted: **Tue Aug 31, 2021 6:43 pm**

Hi all,

To stop/reduce the pinging or twanging sound when a PCP AR is fired, just how much will a silencer help?

Thanks!

Posted: **Wed Sep 01, 2021 11:00 am**

A LOT. You will need a silencer if you are using PCP Rifle. Unless the rifle comes with a suppressor in built.

Posted: **Wed Sep 01, 2021 10:27 pm**

nikitagupta2106 wrote: ↑
Wed Sep 01, 2021 11:00 am
A LOT. You will need a silencer if you are using PCP Rifle. Unless the rifle comes with a suppressor in built.

Hi Nikita,
I was wondering about fixing an additional suppressor to an AR which already comes with an inbuilt suppressor.

You know, whisper quiet !

Posted: **Thu Sep 02, 2021 10:40 am**

arbind wrote: ↑
Tue Aug 31, 2021 6:43 pm
Hi all,

To stop/reduce the pinging or twanging sound when a PCP AR is fired, just how much will a silencer help?

Thanks!

Dear
A silencer or supressors or a shroud "DO NOT REDUCE THE SOUND OF PINGER OR HAMMER Hitting valve SOUNDS "
It reduces only air blast which comes out from muzzle ..
.
FOR REDUCING PINGING SOUND U NEED TO PUT A DIPINNGER OF SOME SORTS.

ALSO it will not reduce the sound crack if u shoot pellets above sound barrier.

Regards
Veerbhadra

Posted: **Thu Sep 02, 2021 11:51 pm**

Rudransh wrote: ↑
Thu Sep 02, 2021 10:40 am

arbind wrote: ↑
Tue Aug 31, 2021 6:43 pm
Hi all,

To stop/reduce the pinging or twanging sound when a PCP AR is fired, just how much will a silencer help?

Thanks!
Dear
A silencer or supressors or a shroud "DO NOT REDUCE THE SOUND OF PINGER OR HAMMER Hitting valve SOUNDS "
It reduces only air blast which comes out from muzzle ..
.
FOR REDUCING PINGING SOUND U NEED TO PUT A DIPINNGER OF SOME SORTS.

ALSO it will not reduce the sound crack if u shoot pellets above sound barrier.

Regards
Veerbhadra

Thanks !

Posted: **Sat Sep 25, 2021 6:40 pm**

arbind wrote: ↑
Thu Sep 02, 2021 11:51 pm

Rudransh wrote: ↑
Thu Sep 02, 2021 10:40 am

arbind wrote: ↑
Tue Aug 31, 2021 6:43 pm
Hi all,

To stop/reduce the pinging or twanging sound when a PCP AR is fired, just how much will a silencer help?

Thanks!
Dear
A silencer or supressors or a shroud "DO NOT REDUCE THE SOUND OF PINGER OR HAMMER Hitting valve SOUNDS "
It reduces only air blast which comes out from muzzle ..
.
FOR REDUCING PINGING SOUND U NEED TO PUT A DIPINNGER OF SOME SORTS.

ALSO it will not reduce the sound crack if u shoot pellets above sound barrier.

Regards
Veerbhadra
Thanks !

Hey check out the video link of mine testing different types of airguns and their sound and effectiveness of supressors.

Regards
Veerbhadra

Posted: **Sun Sep 26, 2021 6:19 am**

If you already have a suppressor, then you will not require an additional suppressor. The pinging sound will be there from the mechanism working inside your PCP. A Dipinger may help to reduce the sound by a few decibels , but the gun will not be super quite. It will still make noise.

Posted: **Thu Sep 30, 2021 2:09 pm**

Suppressor is to reduce the muzzle blast in a PCP be it a built in shrouded barrel type or add on suppressor. Depinging is to remove that annoying noise
which comes when hammer hits the release valve and the floowing process of releasing the air . There are a few hacks for depinging on youtube. Watch them.
GNV

Indians For Guns

Use of suppressor for PCPs-whether needed or not.

Use of suppressor for PCPs-whether needed or not.

Re: Use of suppressor for PCPs-whether needed or not.

Re: Use of suppressor for PCPs-whether needed or not.

Re: Use of suppressor for PCPs-whether needed or not.

Re: Use of suppressor for PCPs-whether needed or not.

Re: Use of suppressor for PCPs-whether needed or not.

Re: Use of suppressor for PCPs-whether needed or not.

Re: Use of suppressor for PCPs-whether needed or not.