Page 1 of 1
Sight in of scope
Posted: Fri Jan 19, 2018 8:49 am
by targetpoint
Dear members,
I sighted in my scope of Artemis at 18.5 meters as it is shooting above 850fps and getting flatter trajectory up to 50m.
But I need to know where should a scope for low powered air rifle suppose shooting at 650 fps should be sighted in to get flatter trajectory up to 30m.
Thanks.
Re: Sight in of scope
Posted: Sat Jan 20, 2018 11:14 pm
by himanshu maru
Well it also depend upon weight of pellet. Please provide weihht also.
Sent from my SM-G928G using Tapatalk
Re: Sight in of scope
Posted: Sun Jan 21, 2018 9:41 am
by targetpoint
Thanks Himanshu,
I mostly shoot with 7.7 grains.
Re: Sight in of scope
Posted: Sun Jan 21, 2018 3:38 pm
by himanshu maru
targetpoint wrote:Thanks Himanshu,
I mostly shoot with 7.7 grains.
Near zero at 11 meters for 2.5 cm kill zone. Your second zero will be at 29 meters, asuming scope height at 4.5cm. Point blank range will be 8 meters to 32 meters.
Sent from my SM-G928G using Tapatalk
Re: Sight in of scope
Posted: Mon Jan 22, 2018 12:32 am
by targetpoint
Dear Himanshu,
Thanks for your kind reply and addressing my queries.Actually I want to sight in my scope which is fitted in SDB GENNEX.I will zero the scope at distance you suggested.
Thanks.Happy plinking.
Re: Sight in of scope
Posted: Wed Feb 14, 2018 9:37 pm
by targetpoint
Dear members,
I need help from you guys.The problem is very puzzling to me.
Actually I sighted in scope of my Gennex at 18.5 m as I shoot mostly at 18 to 22m.Now the problem is when I am shooting anything placed on ground level i.e. below the level of my gun I have to use holdover where as it is bang on target at the level of gun.
Distance being 18 to 22m.
Position-I mostly shoot sitting.
Thanks.
Re: Sight in of scope
Posted: Thu Feb 15, 2018 5:54 pm
by arni_genius
Dear all,
Am new to this forum and also new to air gunning. I have a PH NX100 air rifle fitted with Gamo 3-9X40. It is not an AO scope, but its objective can be screwed in and out to adjust for distance. The objective does not have any external ring attached to it for easy adjustment. Can I buy any AO ring for my scope so that I can adjust it on the fly (without breaking my hold and facing the objective). Thanks in advance.......