Page 1 of 2
fx 4 stg pump issues
Posted: Tue Jul 16, 2013 5:43 pm
by andy_65_in
my fx 4 stg trubo pcp pump has a broken pressure gauge which got crushed under some hevy box-the result a broken gauge.the pump is working ok.where can i find a new pressure gauge
Re: fx 4 stg pump issues
Posted: Tue Jul 16, 2013 6:52 pm
by dr.jayakumar
it looks like you have to import.if you can't you can pm me i can refer someone who might have one.
regards
dr.jk
Re: fx 4 stg pump issues
Posted: Wed Jul 17, 2013 10:45 am
by dev
andy_65_in wrote:my fx 4 stg trubo pcp pump has a broken pressure gauge which got crushed under some hevy box-the result a broken gauge.the pump is working ok.where can i find a new pressure gauge
Andy you might be able to rig up one if you visit Delhi and catch hold of the owner of Vaibhav air.
I will pm you the number when you say so.
Regards,
Dev
Re: fx 4 stg pump issues
Posted: Wed Jul 17, 2013 3:49 pm
by andy_65_in
thanks dev
Re: fx 4 stg pump issues
Posted: Tue Oct 29, 2013 3:03 pm
by andy_65_in
looking for the pressure gauge.whats the cost
Re: fx 4 stg pump issues
Posted: Wed Oct 30, 2013 8:01 pm
by andy_65_in
looking for a fx 4 stg pcp pump pressure gauge.can anyone help
Re: fx 4 stg pump issues
Posted: Fri Nov 01, 2013 3:53 pm
by andy_65_in
the pump has now stopped functioning in the sense whenever i pump the shaft starts jumping back.is it a return valve malfunction.what can be done.i have some lube grease-can it be applied to the shaft-will it make any difference-.
Re: fx 4 stg pump issues
Posted: Mon Nov 18, 2013 8:09 pm
by andy_65_in
O RING 18X2.5 NBR 90
O RING 23X1 NBR 90
O RING 9.3X2.4 NBR 90
O RING 2.5X 1.5 NBR 90
O RING 2.5X 1.5 NBR 70
O RING 9.3X2.4 NBR 70
O RING 20.24X2.62 NBR 70
O RING 21.4X2.4 NBR 70
O RING 4.42X2.62 NBR 70
O RING 5.28X1.78 NBR 70
O RING 20X2.5 NBR 70
O RING 2.9X1.78 PUR 90
sizes of o rings i need to rebuild the fx pump-where can i get them from
Re: fx 4 stg pump issues
Posted: Sat Dec 21, 2013 7:03 pm
by andy_65_in
stripped the pump down-didnt change any o rings but cant remove the pivot pin ser 33 in the fx 4 stg pump diagram-its stuck and that is where the main valve lies-anyone who can help
Re: fx 4 stg pump issues
Posted: Sun Dec 22, 2013 9:07 am
by andy_65_in
where can i get silicone grease
Re: fx 4 stg pump issues
Posted: Sun Dec 22, 2013 10:23 pm
by mercury
as long as it is not for any high speed ( air gun internals ) application .....you could check this out for the 0 rings on the pump. PLEASE READ UP ON THE PRODUCT....before you decide to use it.
http://www.anabond.com/silicon_psc.htm
I have used the 662 on low stroke speed 0 rings.
Re: fx 4 stg pump issues
Posted: Mon Jun 02, 2014 5:38 pm
by andy_65_in
airgunsof arizona offers 5 year waranteee on a fx pump but no body else does-is this a publicity stunt or what-even the fx indian dealer chap called shah doesnt
Re: fx 4 stg pump issues
Posted: Sun Jun 15, 2014 7:35 am
by andy_65_in
any idea how reliable is airgunsindia -he is offering ahills pump and is a authorised hills dealer as per email recieved from hills
Re: fx 4 stg pump issues
Posted: Tue Jul 22, 2014 8:15 pm
by andy_65_in
andy_65_in wrote:any idea how reliable is airgunsindia -he is offering a hills pump and is a authorised hills dealer as per email recieved from hills
any comments-anyone who has dealt with this chap
Re: fx 4 stg pump issues
Posted: Tue Jul 29, 2014 2:29 pm
by andy_65_in
latest and better made blow up of fx 4 stage pump can be downloaded from the fxairguns website-all fx pump users must have one