MY NEW TURBOSHOT - 0.22 cal
Posted: Wed Jul 04, 2012 4:49 pm
MY NEW TURBOSHOT 0.22 cal
> A dream project has finally taken shape!
>Every conceivable advancement / improvement that can possibly be incorporated in an Air Rifle has been done – the result a “World Class” product that can give a run for its money to any international Brake Barrel Springer AR!
>Right from the choice of metal, precision engineering, ergonomics, aesthetics, design and function has been incorporated & integrated in its manufacturing process.
THE WORKS:
1.The receiver CNC machined to perfection with zero tolerance
2.The piston - revolutionary design / precision job and so are the synthetic seal, spring, rear guide & top hat.
3.The adjustable 2 stage trigger is a marvel with the final pull = 1.75lbs
4.Automatic safety
5.The Muzzle Brake with front sight a perfect match for the 17” barrel
6.The Micrometric Rear Sight is original Diana35
7.The stock is smooth sanded with 3 coats of finishing oil +melamine matte finish
8.Integrated 11mm groove with scope stopper machined into the receiver
9.The entire mechanism perfectly bedded into the stock using a special synthetic material
> Great fun to shoot - almost hole in hole groups at 25yrds!
> Average velocity over 10 shots checked on a Chronograph was……………………
720 fps with 14.3gr Master Shot Round Heads (Export Quality)
General Specs:
1.Velocity: 720 FPS with lead pellets 14gr roundheads
2.Barrel Length: 17.00" w/o Muzzle Brake
4.Overall Length: 44”
5.Capacity: 1 Round
6.Cocking Effort: 34 lbs
7.Front Sight: Blade and Ramp
8.Adjustable Micro metric Rear Sight
9.Scope: 11mm Dovetail + scope stop
10.Trigger: Two-stage Adjustable
11.Trigger Pull: 1.75 lbs (2nd stage)
12.Power-plant: Spring-piston
13.Action: Brake Barrel
14.Safety: Automatic
Cheers
Briha
> A dream project has finally taken shape!
>Every conceivable advancement / improvement that can possibly be incorporated in an Air Rifle has been done – the result a “World Class” product that can give a run for its money to any international Brake Barrel Springer AR!
>Right from the choice of metal, precision engineering, ergonomics, aesthetics, design and function has been incorporated & integrated in its manufacturing process.
THE WORKS:
1.The receiver CNC machined to perfection with zero tolerance
2.The piston - revolutionary design / precision job and so are the synthetic seal, spring, rear guide & top hat.
3.The adjustable 2 stage trigger is a marvel with the final pull = 1.75lbs
4.Automatic safety
5.The Muzzle Brake with front sight a perfect match for the 17” barrel
6.The Micrometric Rear Sight is original Diana35
7.The stock is smooth sanded with 3 coats of finishing oil +melamine matte finish
8.Integrated 11mm groove with scope stopper machined into the receiver
9.The entire mechanism perfectly bedded into the stock using a special synthetic material
> Great fun to shoot - almost hole in hole groups at 25yrds!
> Average velocity over 10 shots checked on a Chronograph was……………………
720 fps with 14.3gr Master Shot Round Heads (Export Quality)
General Specs:
1.Velocity: 720 FPS with lead pellets 14gr roundheads
2.Barrel Length: 17.00" w/o Muzzle Brake
4.Overall Length: 44”
5.Capacity: 1 Round
6.Cocking Effort: 34 lbs
7.Front Sight: Blade and Ramp
8.Adjustable Micro metric Rear Sight
9.Scope: 11mm Dovetail + scope stop
10.Trigger: Two-stage Adjustable
11.Trigger Pull: 1.75 lbs (2nd stage)
12.Power-plant: Spring-piston
13.Action: Brake Barrel
14.Safety: Automatic
Cheers
Briha
