Indians For Guns

Dear All,

This is my IHP-Mod-35b .22cal fully tuned with jim maccari tune kit with tasco scope 3-9x-32 illuminated rectical torch & Laser mounts.Hope u all like this.This Airgun is 5 years old was lying in my cupboard unused last week got it tuned now she is a power house.

thanks
unnikrishnan.

hiii nice scope with gun, is this gun work properly? what is weight of this gun,and mention the current rate bcoz i want get one

nice scope

Hi Unni.....
can u pls lets know what results are u getting in terms of power and accuracy after this upgradation.
I have 4 IHP 35 , collected over a period of 7 years. your insight will be a great help.
Regards.

unni2011 wrote:Dear All,

This is my IHP-Mod-35b .22cal fully tuned with jim maccari tune kit with tasco scope 3-9x-32 illuminated rectical torch & Laser mounts.Hope u all like this.This Airgun is 5 years old was lying in my cupboard unused last week got it tuned now she is a power house.

thanks
unnikrishnan.

Fine Bro,
How did you get the JimMaccri tune kit and done the tuning?
Tuning by DIY or by a smith?
Pl. post the tuning processes,it may helpful for us.
Thanks Bro.
Regards,
RamMani
Karur(TN)

RamMani wrote:

unni2011 wrote:Dear All,

This is my IHP-Mod-35b .22cal fully tuned with jim maccari tune kit with tasco scope 3-9x-32 illuminated rectical torch & Laser mounts.Hope u all like this.This Airgun is 5 years old was lying in my cupboard unused last week got it tuned now she is a power house.

thanks
unnikrishnan.

Fine Bro,
How did you get the JimMaccri tune kit and done the tuning?
Tuning by DIY or by a smith?
Pl. post the tuning processes,it may helpful for us.
Thanks Bro.
Regards,
RamMani
Karur(TN)

I agree with Rammani. A detailed post shall help a lot. There are many IHP users who might be helped. There are similar threads here on IFG however one more experience wont hurt.

Regards
BDG

Dear All,

Thanks everyone with ur valuable replies before tuning my ihp was giving me 460 to 520 fps of velocity as per th different weights of pellets are concern.But now after tuning i got 787 to 810fps and the accuracy is outstanding.
All jim maccari stuffs are still available here in mumbai.whatever make of airgun it is the springs and piston seals are available.along with greases & tars.(Low Vibration less cocking effort no cocking noise of the spring)

I use Diana shot 12 grain & Gamo promagnum 15 grain pellets in my IHP superb performance with low cocking effort
of only 40 lbs.The scope installed is Tasco 3-9x-32 illuminated ractical.Also an indian make led torch & laser mounts with laser.All tuning has been done by me itself The spring installed in my IHP is XLR-2 this spring is designed by jim maccari for HW-80 it has 30 coils & the thickness of wire of the spring is 4.5mm.And Large seal(synthetic Also jim make)

Guys it really worth installing jim maccari tuning kit in IHP those who want power go for it.If you guys need any jim maccari kits i can give you the cell no of the person who deals with jim maccari tune kits he is sole importer of jim maccari kits.Pls pm me your contact no for jim maccari kits.

thanks
unni

Unni,

Your scope seems to be aligned to the left of the barrel! Moreover the rings are too high. It is likely that your air gun would not be giving you the desired accuracy. Any parallax problems?

How in the world can a HW80 spring fit into an IHP 35? Have you compared the size (diameter/ length) of the HW80 compression tube with that of the IHP 35?

That said, good job on your air-rifle and the difference in performance you have mentioned is truly amazing; maybe too amazing...

Cheers!
Abhijeet

I wonder what a macari may do to my Diana350 Magnum it may then make a .22 lr ashamed of its velocities. What say abhijeet. I should the get 1300 fps atleast. It may qualify as a small game rifle...

dear the cost of macri???

captrakshitsharma wrote:I wonder what a macari may do to my Diana350 Magnum it may then make a .22 lr ashamed of its velocities. What say abhijeet. I should the get 1300 fps atleast. It may qualify as a small game rifle...

Diana 350 magnum is anyway a small game rifle, isnt it?

Regards
BDG

Dear All,

Yes the performance is very good of my airgun as there are 97 types of different springs of jim maccari with different size,different no. of coils,different thickness of the wire of the spring etc.As far as the Diana350 mag. is concern the no.of coils of the spring are 36 & the thickness of wire of the same is 4.6mm as i know this calculation coz i too have a diana350 mag.in .22cal & have personally seen the entire tune kit of diana 350mag.The kit contains,
(Spring,Piston seal,Spring guide,Top hat,O ring,4 types of different tars & greases.Had enquired about the cost is 10k.

thanks
unni

Dear Unni,

Jim maccari kit normally is not able to deliver 20 fpe for a super magnum gun such as R1/hw80.

I would be curious to know how the same Jim Maccari kit is giving more power in IHP which is way less powerful than an R1.

You sure you are not misleading us?

unni2011 wrote:Dear All,

Thanks everyone with ur valuable replies before tuning my ihp was giving me 460 to 520 fps of velocity as per th different weights of pellets are concern.But now after tuning i got 787 to 810fps and the accuracy is outstanding.
All jim maccari stuffs are still available here in mumbai.whatever make of airgun it is the springs and piston seals are available.along with greases & tars.(Low Vibration less cocking effort no cocking noise of the spring)

I use Diana shot 12 grain & Gamo promagnum 15 grain pellets in my IHP superb performance with low cocking effort
of only 40 lbs.The scope installed is Tasco 3-9x-32 illuminated ractical.Also an indian make led torch & laser mounts with laser.All tuning has been done by me itself The spring installed in my IHP is XLR-2 this spring is designed by jim maccari for HW-80 it has 30 coils & the thickness of wire of the spring is 4.5mm.And Large seal(synthetic Also jim make)

Guys it really worth installing jim maccari tuning kit in IHP those who want power go for it.If you guys need any jim maccari kits i can give you the cell no of the person who deals with jim maccari tune kits he is sole importer of jim maccari kits.Pls pm me your contact no for jim maccari kits.

thanks
unni

Unni's claims of "pre-post" fps are fairly in tune with another post covering the same makeover saga posted last year by one ketan82. Though I am not an expert, I do not see why similar results could not be achieved by using the similar source (JM) materials. Link pasted below for reference.

http://indiansforguns.com/viewtopic.php ... HP#p112412

Unni, since you are based in the Mumbai region, it would be a delight to watch your gun in action one of the days. How does the grouping work out with higher fps ? BTW, did your IHP come with leather washer or a synthetic one (since it is at least 5 years old) ? If former,did you also get the adapter from JM for the synthetic ? Keep basic safety tips in mind, more so since you live in over-populated region (Mumbai) and keep in mind that you do not usually point at anything living, much less shoot at it/ him/ her. Anyway, as long as you are happy with your gun, have a safe and wonderful shooting experience.