Page 1 of 1
Putting in the V-Mach Kit in HW 97K
Posted: Fri Mar 30, 2007 12:23 pm
by Ranjeet Singh
Well Gentlemen,
Finally my HW 97k is Venomised:)...
After working for about 1 hour and a lot of fight, we could open the trigger housing..It was REALLY tight...and then putting in all the parts
And finally Mack The Knife, singlehandedly put the spring back with his body as the spring compressor...Mind you its a full blown FAC spring:)
All in all quite an experience..and a very good one..Pran was also there to witness it..And help. A big thanks to him as well..
Only thing was we took too long a time, well past Mack The Knife's kids dinner time. Now I owe them one..
And one more thing I figured out, A DIY kit ain't that easy to put in..and if not with Mack The Knife's help, I could never do it myself...
Thanks Mack The Knife ..
Cheers
Ranjeet
Posted: Fri Mar 30, 2007 12:48 pm
by Mack The Knife
No sweat. You have a tack-driver in that rifle.
Happy and safe shooting.
Mack The Knife
Re: Putting in the V-Mach Kit in HW 97K
Posted: Fri Mar 30, 2007 2:09 pm
by hamiclar01
great job guys, well done!
so i take it that venom kits are fine in india? take care, and importantly, have fun!!
anand
Posted: Fri Mar 30, 2007 2:48 pm
by dev
Yes kato, you don't need lisanse in this fine land of ours.
Regards,
dev
hamiclar01";p="16224 wrote:
great job guys, well done!
so i take it that FAC rated venom kits are legal in india? i mean, they don't need a license?does that mean i can actually pick up a FAC venom in uk and get it fitted in india, rather than england where i think i need a lasanse for fitting?
take care, and importantly, have fun!!
anand
Re: Putting in the V-Mach Kit in HW 97K
Posted: Fri Mar 30, 2007 4:25 pm
by Pran
Found it very informative Ranjeet.Was glad Mack The Knife decided to give me a call at the last moment.
Pran
Posted: Fri Mar 30, 2007 4:37 pm
by Vikram
Congrats Ranjeet.Good shooting and have fun.
Mack The Knife, have you been a weight lifter or what?LOL.
Best-
Vikram
Re: Putting in the V-Mach Kit in HW 97K
Posted: Fri Mar 30, 2007 5:23 pm
by kanwar76
Hey congrats Ranjeet,
Glad to know you are in Bangalore. why not meet sometime, we can have First Official Offline Bangalore meet ..
.
Vikram";p="16246 wrote:
Mack The Knife, have you been a weight lifter or what?LOL.
Best-
Vikram
If I am not wrong he was a Boxer
-Inder
Re: Putting in the V-Mach Kit in HW 97K
Posted: Fri Mar 30, 2007 6:11 pm
by Ranjeet Singh
kanwar76";p="16248 wrote:Hey congrats Ranjeet,
Glad to know you are in Bangalore. why not meet sometime, we can have First Official Offline Bangalore meet ..
.
If I am not wrong he was a Boxer
-Inder
That's a sure thing, we'll definately meet up....
Cheers
Ranjeet
Posted: Fri Mar 30, 2007 7:05 pm
by to_saptarshi
Congrats Ranjeet
BTW do u hav taken any pics during the session if yes please do share them with us. Also let us know about the performance after you installed the kit.
Regards
Saptarshi
Re: Putting in the V-Mach Kit in HW 97K
Posted: Fri Mar 30, 2007 7:13 pm
by Mack The Knife
Saptarshi,
One of our members, Mario (from Belgium), has already done a photo sequence of the strip down. You can see it here...
http://users.skynet.be/fa830879/airgunn ... strip.html
Mack The Knife
Re: Putting in the V-Mach Kit in HW 97K
Posted: Fri Mar 30, 2007 7:20 pm
by Mack The Knife
Pran";p="16244 wrote:Was glad Mack The Knife decided to give me a call at the last moment.
Pran
You are making it sound as if I was in two minds about calling you....
Glad to have you over and we will get down to some lessons soon.
Mack The Knife
Posted: Fri Mar 30, 2007 7:22 pm
by to_saptarshi
Thanks Mack The Knife
Re: Putting in the V-Mach Kit in HW 97K
Posted: Fri Mar 30, 2007 9:29 pm
by Pran
Mack The Knife Bana";p="16267 wrote:Pran";p="16244 wrote:Was glad Mack The Knife decided to give me a call at the last moment.
Pran
You are making it sound as if I was in two minds about calling you....
What i meant was that I would've seen Ranjeet's PM in the night if you hadn't called me.
>and we will get down to some lessons soon.
Please give me a call when you're free.
Pran