Page 1 of 1
IHP trigger problem
Posted: Thu Jan 20, 2011 7:09 pm
by sabretooth
Hi All,
Its been only 2 weeks since i got my IHP 35 .22
About 500 pellets would have run through my air rifle. Suddenly today the trigger went dead. The spring is in stretched position now(cocked) and am worried about the spring.
Please advice.
can somebody give me tirtha's contact number?
Re: IHP trigger problem
Posted: Thu Jan 20, 2011 7:35 pm
by Katana
When by 'dead' you mean it free? If that is the case then either shims or the pin have come off. Open it up and see for yourself. IHPs are extremely simple in design. Nothing you can't do yourself.
Re: IHP trigger problem
Posted: Sun Jan 23, 2011 11:18 am
by thomast1
hi sabretooth,
what Katana said is true, it can be done by anyone.. seperate stock and the action. make sure both pivots at the back end of the gun (spring compressor part) are intact and not broken or bent before you do anything,( one is enough to avoid any trouble, but just in case to be damn careful!)
look and you might be able to figure it our before a second look at it!
Thomas
Re: IHP trigger problem
Posted: Sun Jan 23, 2011 3:28 pm
by Ganesh TT
with Thomas...
Re: IHP trigger problem
Posted: Mon Jan 24, 2011 4:33 pm
by sabretooth
Hi,
Thanks for the replies.
Today i spoke to Mr.Sathyanarayana of tamilnadu armoury. I visited the shop with my airrifle. He told me it was trigger problem and i need to change the trigger which would cost me around RS.600- 700
Will update once my AR is ready.
-Santhosh
Re: IHP trigger problem
Posted: Mon Jan 24, 2011 9:46 pm
by thomast1
Hi Santhosh,
change the trigger sounds crazy! when you know the trigger is a single solid piece. the parts are made damn strong as well, just keep your watch if its going to be a twist thats gonna fix it and not a replacement. take the old parts with the gun too..
Thomas