air rifle suppressor?

[Gunner_dh]

No threaded muzzles on Indian airguns. You will need to get it done yourself if you're so keen. However I'm not sure how are you going to get one in India....

Hi Nitoex,

Just a bit of information, there are multiple locally made AR's which do have thredding. Eg. Can-on. I own 2 of them. Also changed the muzzle weight to my liking by ordering one from the factory.

Regards
dh

[AnandNair]

I had made a full barrel shroud with suppressor for my precihole a few years before. works well both in noise reduction and vibration.

Added in 8 minutes 8 seconds:

I have been thinking of making myself one with jugaad. PVC pipes, aluminium plates (as baffles in the shroud) and a 5mm drill bit. There are some videos in YT.
The problem of mounting it on the muzzle can be solved with duct tapes (black tape). Wind the tape coiling it on top of itself on the muzzle. It will increase the outer dia. Then you can squeeze fit the suppressor and then fix it with tape/araldite/loctite.
Regards,

Made mine using the barrel weight, CF tube, derlin rod, hair curlers.

[arni_genius]

Wow...nice!
I might sound too greedy if i ask for pics. But i guess sometimes curiosity gets the better off it. Hehe

But any guidance is most welcome

Regards..

[AnandNair]

Wow...nice!
I might sound too greedy if i ask for pics. But i guess sometimes curiosity gets the better off it. Hehe
But any guidance is most welcome
Regards..

I had made a full post in another forum.
http://www.thegungeek.com/SGP/viewtopic ... 12&t=14352
in case you want to have a look

[arni_genius]

Thanks a lot Anand

[Shivaji.Dasgupta]

An AR has an effective Range of 30 Yrds approx( 50 yrds some Brands Claims). Most of the Sound it emitting is Mechanical due to spring and piston action rather than muzzle blast like a Rifle where the powder is responsible for noise. Putting a Muzzle break is ok but installing a Sound Suppressor ???? I am not sure how much its effective, it may add some cosmetic beauty like an assault rifle look etc but effectiveness is in ????

As question about a sound suppressor is legal or not. Till the best I know ( May be I am wrong and PLS correct me if its so) In India there is no guide line for AR with or Without suppressor but for a Firearms the Sound Suppressor is available to Special operation Groups from Police or Defense forces.

[arni_genius]

It is not legal probably. You are right on that. But I am not going out in public with the suppressor put on (just backyard plinking). I just don't want to bother my old grandparents (or neighbours).
Suddenly expanding air is also loud (depends on perspective ). A simple experiment. Just blow a balloon to the max and pop it with a pin. And here we have 20 joules of pressurised air suddenly expanding. But mostly if we can reduce some sound then why not.

But lastly (and more importantly)......it is like those DIY science experiments. Just keeps things a little more interesting

[Gunner_dh]

Hi Arni,

Would request you to just give a thought on your last communication - knowingly possesing an illegal item even if the intent might not be harmful should be avoided. Far above should not be voiced out on a platform which might also impact the other forum members.

Regards
dh

Added in 6 minutes 44 seconds:
Would also add few days back I had a conversation regarding the legality of suppressor.
PFB the link for reference
http://indiansforguns.com/viewtopic.php?t=25404

Regards
dh

[Gunner_dh]

Would also add few days back I had a conversation regarding the legality of suppressor.
PFB the link for reference
http://indiansforguns.com/viewtopic.php?t=25404

Regards
dh

[Shivaji.Dasgupta]

As I said in my prev. post. No guide lines for a Sound Suppressor in an AR. Reason may be anything but till now its neither Prohibited now approved. so I think its Up to user to decide.
trying a DIY Project for AR is nothing violating the rule as its now mainly install in .177, If any one wants to try a project then I don't feel there is anything serious illegal he is going to do. More over through this sort of projects many useful and handy instruments take shape.
We already see the Recent Developed Chrono by Our Members.
Effectiveness of a suppressor on AR may be a question but no harm to give a try. Frankly I support DIY projects (safety is priority) and happy to see a lot of Knife makers are now on board through the same initiative.
Regards

[arni_genius]

Thanks for the encouragement Shivaji......and also noted the words of caution regarding legality from DH.

[Bullo oka]

I made two with unused item.
It minimizes bit of sound but not the mechanical thump in spring/nitro piston

Sent from my ONEPLUS A5000 using Tapatalk

[Shivaji.Dasgupta]

Ha ha ha. Its really a DIY. I think The school Vacation is started.
Dear Bullo Oka I am just Jocking. but I Really Appreciate your Efforts. Only thing What I Find Here is You have used cardboard/Tin Can sort of Material for this purpose. Frankly I don't know how Much it is effective and sturdy. For any weapon part this is the basic it should be effective and sturdy to work all out.I respect your hard work but I think you can copy the same design of yours with Metal Tubes or At least Aluminium tubes as a soft material.
Regards.

[Bullo oka]

Ha ha ha. Its really a DIY. I think The school Vacation is started.
Dear Bullo Oka I am just Jocking. but I Really Appreciate your Efforts. Only thing What I Find Here is You have used cardboard/Tin Can sort of Material for this purpose. Frankly I don't know how Much it is effective and sturdy. For any weapon part this is the basic it should be effective and sturdy to work all out.I respect your hard work but I think you can copy the same design of yours with Metal Tubes or At least Aluminium tubes as a soft material.
Regards.

[emoji16]...
Those are to cool off my curiosity.
Will try to build a proper one after I get my px100

Sent from my ONEPLUS A5000 using Tapatalk

[Gunner_dh]

Try using aquagaurd filter (ripped down the thredded one) along with pvc pipe.

Regards
dh