G-Smith Spring & Washer.

ketan · Post by **ketan** » Thu Jul 03, 2008 12:43 pm

Hello Everybody,

Today in the morning my door bell rang

opened the door & it was courier boy delevered my G-Smith Spring & Washer.

It is for my IHP Mod-35 .22 cal.I havent done this before.
Request to everybody to pls post me ur thoughts about installation.

Can i go for the Installation

Any Do,s & Dont's to be done while installation work.

Usefull information Expected from all you guys & Gurujis.

thanks & regards
ketan.

Mandal Aabhari aahe.

striker · Post by **striker** » Thu Jul 03, 2008 9:03 pm

Ketan
can u able to post the pic of gsmith spring and piston and their price .

thanks
sankar

ronish · Post by **ronish** » Fri Jul 04, 2008 1:09 am

hi, the seal u got is leather or synthetic?. can u quote the price.?do keep posting the performance of gsmith spring.
ronish

yash3_great · Post by **yash3_great** » Fri Jul 04, 2008 7:43 am

Ketan,

I assume you have the use of a mainspring compressor if you planning to change it yourself. Mainsprings are compressed under tension when inside the powerplant, and can cause injury if you attempt to change it without a compressor.

Yash...

ketan · Post by **ketan** » Fri Jul 04, 2008 11:53 am

Thanks Yash,Striker & Ronish for the reply.
The cost of G-Smith Spring is 230 Rs & washer for 65 Rs
surely i will post the picks in evening.

Yash dada i do have a main spring compressor at my home. Tonite is the night when i am gonna replace the main spring of my ihp with G-Smith spring.

yesterday night i kept the leather washer deeped in machine oil(40no. oil) as there was such instruction on the packing .

Thanks & Regards
Ketan.

yash3_great · Post by **yash3_great** » Fri Jul 04, 2008 12:02 pm

Swell! Looking forward to the pics and results of change in shooting behavior if any.

snIPer · Post by **snIPer** » Tue Jul 22, 2008 4:01 pm

Ketan how did the process go. what do you think of the final result?

badshah0522 · Post by **badshah0522** » Tue Jul 22, 2008 4:08 pm

ketan";p="46765 wrote: Yash dada i do have a main spring compressor at my home.

Did you bought this compressor along with the spring ,,as you wrote earlier that you never did it ,its your first time.
How much did it cost?

ketan · Post by **ketan** » Tue Jul 22, 2008 4:44 pm

Hey guys,

The cocking effort now with G-Smith spring has redused now & after firing it gives the tight noise just like a firearm & cloud of smoke after every shot.

Accuracy is also fine at 10mts it gives me 1" groups of 5 shots.

But guys any of you know the spring manufacturers rather than G-Smith & cherokee??????

ronish · Post by **ronish** » Tue Jul 22, 2008 7:24 pm

noise just like a firearm & cloud of smoke after every shot. ---- may be dieselling

But guys any of you know the spring manufacturers rather than G-Smith & cherokee?????? ----- tasco springs

ai · Post by ai » Tue Jul 22, 2008 9:23 pm

Amongst the best, if not the best springs are made by John Knibbs, UK under the brand name Titan and Ox. Brochure claims it will not lose power even when gun is left cocked. Will cost nearabout an IHP gun though! I have one to spare for Diana Mod-35 and equivalent guns (BSA Airsporter/Mercury/Challenger/635Magnum/Supersport/Superstar/Goldstar/Centenary; Air Arms Firepower/Jackal/Woodsman/Prosport; Diana Original Mod-34/35/36/38/4548/52; RWS Firebird; Falke Mod80-90; HW77/HW99), along with original Trigger and Piston Head Washer For Diana Mod-35. Rs. 5000/- for the set.

yash3_great · Post by **yash3_great** » Wed Jul 23, 2008 5:51 pm

But not every gun can take poweful springs. I remember somone telling me that a james maccari spring instaled in an IHP resulted in the gun getting damaged because of the extraordinary spring power.

Post by **dev** » Wed Jul 23, 2008 6:12 pm

Yup firts the screws will go loose, and then the trigger mechanism starts become unstable.

Overall a careful mating of spring, guide, piston etc are required.

regards,

dev

Post by **dev** » Wed Jul 23, 2008 6:18 pm

James Maccari is great but its not much of a point using it on a IHP 35.

Dev

But guys any of you know the spring manufacturers rather than G-Smith & cherokee??????

[/quote]

snIPer · Post by **snIPer** » Wed Jul 23, 2008 8:01 pm

Want to experiment with springs??? try a brand new spring of a Luna

Now before anyone asks. I have not tried it.
I however did try a spring (was told that it was from the internals of the shocks of a Maruthi 800 which i doubt.)

The spring went soft after a few shots. I guess that is because it was ground down a bit to fit into the mod 35.

So i switched to Cherokee and its been high on power since.

I have heard of ppl using Luna springs and that they were happy with the results how long they were happy i do not know.

If anyone is game to try this then do let us know.

Indians For Guns

Indians For Guns

G-Smith Spring & Washer.

G-Smith Spring & Washer.

Re: G-Smith Spring & Washer.

Re: G-Smith Spring & Washer.

Re: G-Smith Spring & Washer.

Re: G-Smith Spring & Washer.

Re: G-Smith Spring & Washer.