Dear Friends,
Can you provide me the contact details of CISCO AIR GUNS . . .
Regards
Suraj.
CISCO AIR GUNS
-
suraj2087
- On the way to nirvana
- Posts: 94
- Joined: Thu Jul 22, 2010 9:53 am
- Location: Faridabad
-
hotsteper
- Fresh on the boat
- Posts: 1
- Joined: Tue Apr 10, 2007 1:14 pm
- Location: faridabad
Re: CISCO AIR GUNS
Hi Suraj,
Although its been long since u asked but I happened to see your post and the information simultaneously while I was searching the same, its as below:
Sisco Air Guns
Location
Supreme Iron & Steel Co. , Pathankot 145001
Contact Info
Phone 098 76 877788
Email [email protected]
Hope its still relevant to you and our fellow ifgns
Regards
Although its been long since u asked but I happened to see your post and the information simultaneously while I was searching the same, its as below:
Sisco Air Guns
Location
Supreme Iron & Steel Co. , Pathankot 145001
Contact Info
Phone 098 76 877788
Email [email protected]
Hope its still relevant to you and our fellow ifgns
Regards
-
Basu
- Veteran
- Posts: 1483
- Joined: Wed Apr 08, 2009 7:14 pm
- Location: Salt Lake Kolkata
Re: CISCO AIR GUNS
I understand that it comes in smooth bore yet very accurate.
Any body may please enlighten me.
Basu
Any body may please enlighten me.
Basu
Not all those wander , are lost...............
-
Basu
- Veteran
- Posts: 1483
- Joined: Wed Apr 08, 2009 7:14 pm
- Location: Salt Lake Kolkata
Re: CISCO AIR GUNS
It is understood that SISCO makes smooth bore air rifles only.
At present they do not have any dealer in kolkata.
Any one who has the said rifle , may please post his view as it is an old house and there is hardly any post about it.
Basu
At present they do not have any dealer in kolkata.
Any one who has the said rifle , may please post his view as it is an old house and there is hardly any post about it.
Basu
Not all those wander , are lost...............
-
thunderbird1
- Learning the ropes
- Posts: 19
- Joined: Mon Aug 05, 2013 1:41 pm
Re: CISCO AIR GUNS
Hi Basu
My friend owns one Model-47 gun from SISCO ( in 0.22 cal.). I found it rather inaccurate and powerless. Today I stripped it , changed the bucket washer and tried with out much improvement. Since I suspected that the transfer port is very small ( 2 mm) I enlarged it to 3.2 mm and found the performance improved considerably. Still I will not recommend this particular model to anyone.
My friend owns one Model-47 gun from SISCO ( in 0.22 cal.). I found it rather inaccurate and powerless. Today I stripped it , changed the bucket washer and tried with out much improvement. Since I suspected that the transfer port is very small ( 2 mm) I enlarged it to 3.2 mm and found the performance improved considerably. Still I will not recommend this particular model to anyone.