increase pellet weight
- jignesh712712
- Almost at nirvana
- Posts: 179
- Joined: Sun Aug 07, 2011 2:53 pm
- Location: rajkot
increase pellet weight
i have increase pellet weight after shoot some target.... sprey bottle, talcum powder box, etc and result is unexpected good.
( pellets back side fill m-seal )
try this
( pellets back side fill m-seal )
try this
Last edited by jignesh712712 on Sat Oct 20, 2012 4:15 pm, edited 1 time in total.
- jignesh712712
- Almost at nirvana
- Posts: 179
- Joined: Sun Aug 07, 2011 2:53 pm
- Location: rajkot
- mundaire
- We post a lot
- Posts: 5410
- Joined: Mon May 22, 2006 5:53 pm
- Location: New Delhi, India
- Contact:
Re: increase pellet weigh
Should give poor accuracy, because:
A) The pellet weight will vary considerably, resulting in inconsistent velocities and by extension stringing
B) Filling the skirt with epoxy (m-seal) would prevent the skirt from expanding as intended. This expansion is important as it provides a seal to prevent air from escaping around the pellet while in the barrel.
Why don't you just get heavier pellets?
A) The pellet weight will vary considerably, resulting in inconsistent velocities and by extension stringing
B) Filling the skirt with epoxy (m-seal) would prevent the skirt from expanding as intended. This expansion is important as it provides a seal to prevent air from escaping around the pellet while in the barrel.
Why don't you just get heavier pellets?
Like & share IndiansForGuns Facebook Page
Follow IndiansForGuns on Twitter
FIGHT FOR YOUR RIGHTS - JOIN NAGRI NOW!
www.gunowners.in
"Political tags - such as royalist, communist, democrat, populist, fascist, liberal, conservative, and so forth - are never basic criteria. The human race divides politically into those who want people to be controlled and those who have no such desire." -- Robert Heinlein
Follow IndiansForGuns on Twitter
FIGHT FOR YOUR RIGHTS - JOIN NAGRI NOW!
www.gunowners.in
"Political tags - such as royalist, communist, democrat, populist, fascist, liberal, conservative, and so forth - are never basic criteria. The human race divides politically into those who want people to be controlled and those who have no such desire." -- Robert Heinlein
-
- One of Us (Nirvana)
- Posts: 474
- Joined: Sun Jun 28, 2009 12:59 pm
- Location: mumbai
Re: increase pellet weight
Should give poor accuracy, because:
A) The pellet weight will vary considerably, resulting in inconsistent velocities and by extension stringing
B) Filling the skirt with epoxy (m-seal) would prevent the skirt from expanding as intended. This expansion is important as it provides a seal to prevent air from escaping around the pellet while in the barrel.
Why don't you just get heavier pellets?
-
- Veteran
- Posts: 1906
- Joined: Tue Apr 06, 2010 9:55 am
- Location: tamilnadu,india
Re: increase pellet weight
heavier pellets...go for rabbit magnum.but if your gun is indian springer it will spit not shoot.
regards
dr.jk
regards
dr.jk
- ramtiger
- One of Us (Nirvana)
- Posts: 393
- Joined: Tue Sep 27, 2011 7:49 pm
- Location: Tamilnadu
Re: increase pellet weight
for indian springer master shot is best
if you want heavier pellets Gsmith is good
if you want heavier pellets Gsmith is good