Indians For Guns

Posted: **Sun Oct 05, 2008 10:03 pm**

As shown in the picture. The plastic end cap and two pins.

Trigger spring -> we have to remove it.

Removed!

Remove the trigger pin

Pull out the trigger

Remove the barrel

Put it on spring compressor, remove the end cap. I use Rs.2 coin end of it + little grease.

Screw the compressor. Remove the 2nd pin.

Removed

Hold the coin and unscrew the compressor. Careful: do not let the coin slips.

Ok You are done!

Posted: **Sun Oct 05, 2008 10:37 pm**

Excellent DIY pictures Tirtha

. Keep it up.

regards

OUP

Posted: **Sun Oct 05, 2008 11:52 pm**

posting dos and donts will be appreciated
specially donts because i think using a vice while removing the main spring is a risky process for DIYers

Posted: **Mon Oct 06, 2008 12:36 am**

Nice pics and steps

Cant wait for Part II and so on

Posted: **Mon Oct 06, 2008 10:20 am**

Sitar i would suggest a long vice- there are ones that are above 4 feet in length. those are useful and also safe (provided that you concentrate on what you are doing)

Posted: **Mon Oct 06, 2008 10:30 am**

snIPer";p="55277 wrote: provided that you concentrate on what you are doing

Posted: **Mon Oct 06, 2008 11:47 am**

Just a passing thought...
As per RBI regulations, ill-treating of all currency issued by RBI is a criminal offense. Guess we should use something other than a coin

P.S. I could not find the link of the RBI regulations in their website. Could not find this info in The new website ...

Posted: **Mon Oct 06, 2008 11:55 am**

Posted: **Mon Oct 06, 2008 1:50 pm**

Hai tirtha
Great ,looks my ihp baby is undergoing serious physical fitness program..

cheeers
sankar

Posted: **Mon Oct 06, 2008 7:31 pm**

striker";p="55298 wrote:Hai tirtha
Great ,looks my ihp baby is undergoing serious physical fitness program..

cheeers
sankar

Posted: **Fri Dec 26, 2008 11:45 am**

Tirtha

Part II ? ? ? ? ?

M

tirths";p="55316 wrote:
striker";p="55298 wrote:Hai tirtha
Great ,looks my ihp baby is undergoing serious physical fitness program..

cheeers
sankar

Posted: **Fri Dec 26, 2008 2:03 pm**

Sorry for the delay, actually I was occupied for a major tuning work for an old classic HW50 mark II.

I will soon upload, IHP's part II.

-Tirtha

Posted: **Fri Dec 26, 2008 4:34 pm**

tirths";p="62842 wrote: Sorry for the delay, actually I was occupied for a major tuning work for an old classic HW50 mark II.

I will soon upload, IHP's part II.

-Tirtha

Hi,

Don't know if you have already put it together? But you might as well powder coat in black since you've got it opened up. Might make it look nice.

Dev

Posted: **Wed Jan 07, 2009 12:13 pm**

Thirtha waiting for part two...my spring compressor is almost made...

Posted: **Sun Jan 18, 2009 9:24 pm**

Ok guys, lets start the 2nd part

I want you to see what happens when you have cocked the IHP. I am sure you will not be happy after seeing this.

1. While cocking..

2. Releasing the barrel..1

3. Releasing the barrel..2

4. Released the barrel completely..

See how much the trigger is holding. Now you know what you suppose to do in order to stop accidental fire

Indians For Guns

My Success and Failure of IHP Tuning--Part 1 (LONG)

My Success and Failure of IHP Tuning--Part 1 (LONG)

Re: My Success and Failure of IHP Tuning--Part 1 (LONG)

Re: My Success and Failure of IHP Tuning--Part 1 (LONG)

My Success and Failure of IHP Tuning--Part II (Trigger)