Indians For Guns

Hi Friends
This is my New Air Rifle Spring Compressor made full of Ms sections and painted matte finsh to have a decent lock.
i have designed to use it for the break barrel air rifle spring Removal .

If barrel and cocking link is Removed then the compression chamber can be placed in and spring can be removed and assembled in minutes







I request all the ifg members who have their own spring compressor to post their pic Here.



cheers
sankar

Good work Sankar!!

Small suggestion. Add roller on the head of the screw otherwise while torque applies on the tube cap of the compression your gun will twist along with it and chances of slip can be a fatal.



~~~~~~~~~|, |``````|
\\\\\\\\\\\\\\\\\\|O|,,,,,,,,,,,,|
~~~~~~~~~| ,|,,,,,,,,,,,,|
...............,......... ```````
Spring|Roller(in red)|Wood Block|Cpmpression tube

Try this

-Tirtha

A 4 feet long carpenters Bench Vise is what I use.

Nice conrtaption. Simple and effective.
What is the second hole above the main bolt for?

Tenx

The holes in the both ends will be accomodated with a 3' long both side threaded rod with bolt to prevent the compression chamber coming out during compression/diaasembly of spring.


Cheers
Sankar

Thanks...